基于狄拉克半金属的可调谐的太赫兹宽频带纯线偏振转换器

本文基于新型材料狄拉克半金属(Dirac semimetals,DSs),设计了一款高纯度宽频带可调谐线偏振转换器,偏振转换率(PCR)超过99%的相对带宽为15.72%。在频段5.25~6.14 THz内,椭度角接近0°,偏振方位角约等于-90°。这种转换性能主要是源于顶层超表面的各向异性和局域的表面等离子体激元谐振(LSPRs)的激发。此外,通过改变费米能的大小可以使所设计的偏振转换器在不同的频带范围内实现宽频带偏振转换。最后,通过半解析的方法对偏振转换特性进行了理论分析。该设计在太赫兹通信、成像、无损检测等领域具有一定的应用价值,同时为宽频带可调谐太赫兹线偏振转换器的设计提供了新思路。     

Broadband cross-circular polarization carpet cloaking based on a phase change material metasurface in the mid-infrared region

In view of the fact that most invisibility devices focus on linear polarization cloaking and that the characteristics of mid-infrared cloaking are rarely studied, we propose a cross-circularly polarized invisibility carpet cloaking device in the mid-infrared band. Based on the Pancharatnam–Berry phase principle, the unit cells with the cross-circular polarization gradient phase were carefully designed and constructed into a metasurface. In order to achieve tunable cross-circular polarization carpet cloaks, a phase change material is introduced into the design of the unit structure. When the phase change material is in amorphous and crystalline states, the proposed metasurface unit cells can achieve high-efficiency cross-polarization conversion, and reflection intensity can be tuned. According to the phase compensation principle of carpet cloaking, we construct a metasurface cloaking device with a phase gradient using the designed unit structure. From the near- and far-field distributions, the cross-circular polarization cloaking property is confirmed in the broadband wavelength range of 9.3–11.4 µm. The proposed cloaking device can effectively resist detection of cross-circular polarization.     

基于谐振环的太赫兹宽带偏振转换器件研究

提出了一个基于谐振环结构的宽带且高效的太赫兹线偏振转换器.该结构由金属-电介质-金属三层构成,位于顶层的是基于开口谐振环的超表面,中间为介质层,底部为金属板.实验结果表明,该结构可以在0.59-1.24 THz频率范围内将线偏振的太赫兹波偏振方向旋转90°,转换率超过80%.通过计算该结构在所研究的频率范围内反射光的偏振角和椭圆角,证实了该结构可以在较宽的频率范围内实现高效的线偏振转换.对该结构在偏振转换率高的频率下表面电流和电场进行仿真,分析了高偏振转换率和宽带的机理.同时,研究了该结构的偏振转换率对入射角以及偏振角的依赖性,结果表明该结构在0°-30°入射角范围内、-10°-10°偏振角范围内均有很好的偏振转换性能.     

Highly efficient mid-infrared metasurface based on metallic rods and plate

Metasurface is a new kind of 2D metamaterial that is able to manage a variety of light beam modulations through steering the phase of the scattering waves. In this work,we utilize the metasurface to manipulate the light beam in the mid-infrared regime. By using the metallic rod and the plate structure,the metasurface presents a high polarization conversion efficiency and a wide working bandwidth. With specially rotated metallic rods,the metasurface can realize various light beam manipulations,such as negative reflection,beam collimation,and focusing.All of these results show that such a metasurface will have potential applications in future mid-infrared optics.     

Broadband perfect polarization conversion metasurfaces

We propose a broadband perfect polarization conversion metasurface composed of copper sheet-backed asymmetric double spilt ring resonator(DSRR).The broadband perfect polarization convertibility results from metallic ground and multiple plasmon resonances of the DSRR.Physics of plasmon resonances are governed by the electric and magnetic resonances.Both the simulation and measured results show that the polarization conversion ratio(PCR)is higher than 99%for both x-and y-polarized normally incident EM waves and the fractional bandwidth is about 34.5%.The metasurface possesses the merits of high PCR and broad bandwidth,and thus has great application values in novel polarization-control devices.     

A broadband cross-polarization conversion anisotropic metasurface based on multiple plasmon resonances

A compact broadband cross-polarization conversion metasurface functioning in the microwave regime is realized and experimentally demonstrated. The metasurface consists of a two-dimensional periodic arrangement of anisotropic doubleslit split-ring-resonator-based unit cells printed on top of a dielectric substrate, backed by metallic cladding. The proposed metasurface converts an x- or y- polarized wave into its orthogonal polarization over a fractional bandwidth of 100% from 5-15 GHz, both for normal as well as oblique incidence. Moreover, the sub-wavelength unit-cell size, thin dielectric substrate,and unique unit-cell design collectively make the response of the metasurface same for both polarizations and insensitive to the incidence angle. The designed structure is fabricated and tested. The measurement and simulation results are found to be consistent with each other.     

Realization of wide-angle and wideband absorber using metallic and graphene-based metasurface for mid-infrared and low THz frequency

This article presents a study on mid-infrared and low-THz absorbers based on metallic and graphene metasurface. The absorber is constructed of a periodic array of patterned elements in patch form placed on a quarter-wavelength dielectric film terminated by a metallic reflector. A simple analytical circuit model equivalent to patch array is used for employing the matching impedance approach to realize the wideband absorber. This absorber is polarization independent for normal incident waves owing to its symmetric structure. Simulation and analytical circuit model results show that the graphene and metallic-based absorbers proposed in this paper can operate with an absorption value above 90% in a normalized bandwidth of 100% in the low terahertz (THz) and the mid-infrared regime, respectively. The proposed absorber is wide-angle for both TM and TE polarizations and polarization-insensitive for small incident angles.     

Switchable terahertz polarization converter based on VO2 metamaterial

A switchable terahertz (THz) polarization converter based on vanadium dioxide (VO₂) metamaterial is proposed. It is a 5-layer structure which containing metal split-ring-resonator (SRR), the first polyimide (PI) spacer, VO₂ film, the second PI spacer, and metal grating. It is an array structure and the period in x and y directions is 100 μm. The performance is simulated by using finite integration technology. The simulation results show that, when the VO₂ is in insulating state, the device is a transmission polarization converter. The cross-linear polarization conversion can be realized in a broadband of 0.70 THz, and the polarization conversion rate (PCR) is higher than 99%. Under thermal stimulus, the VO₂ changes from insulating state to metallic state, and the device is a reflective polarization converter. The linear-to-circular polarization conversion can be successfully realized in a broadband of 0.50 THz, and the PCR is higher than 88%.     

Wideband switchable dual-functional terahertz polarization converter based on vanadium dioxide-assisted metasurface

The terahertz technology has attracted considerable attention because of its potential applications in various fields.However,the research of functional devices,including polarization converters,remains a major demand for practical applications.In this work,a reflective dual-functional terahertz metadevice is presented,which combines two different polarization conversions through using a switchable metasurface.Different functions can be achieved because of the insulator-to-metal transition of vanadium dioxide(VO₂).At room temperature,the metadevice can be regarded as a linear-to-linear polarization convertor containing a gold circular split-ring resonator(CSRR),first polyimide(PI)spacer,continuous VO₂ film,second PI spacer,and gold substrate.The converter possesses a polarization conversion ratio higher than 0.9 and a bandwidth ratio of 81%in a range from 0.912 THz to 2.146 THz.When the temperature is above the insulator-to-metal transition temperature(approximately 68℃)and VO₂ becomes a metal,the metasurface transforms into a wideband linear-to-circular polarization converter composed of the gold CSRR,first PI layer,and continuous VO₂ film.The ellipticity is close to-1,while the axis ratio is lower than 3 dB in a range of 1.07 THz-1.67 THz.The metadevice also achieves a large angle tolerance and large manufacturing tolerance.     

Novel optical polarizer design based on metasurface nano aperture for biological sensing in mid-infrared regime

Since Metasurfaces are playing important roles in optical devices such as optical polarizers and detectors, in this article, we have proposed a novel shape of nano aperture antenna for mid-infrared applications such as bio-sensing and other potential optical applications based on plasmonic characteristic of the gold layer over the SiN substrate. The transmittance tensor is obtained for vertical and horizontal linear polarization and base on boundary condition of the metasurface, the circular polarizations are extracted which are confirmed by the electric field distributions. We have shown by the parametric studies that the phase difference is altered by the gap and slot width and so with the dimension modification, we are able to achieve circular polarizer in the optical range. The biological materials with a thickness of 80 nm have then been placed over the metasurface layer and the figures of merits have been obtained. We have revealed that when the circular polarization is osculated to the metasurface at a special frequency the linear polarization is obtained in the other side of the metasurface. The nano aperture has been modeled and the finite difference time domain calculations are performed in CST Microwave Studio as a commercial full wave simulation software.     

Broadband asymmetric transmission for linearly and circularly polarization based on sand-clock structured metamaterial

We proposed a sandwich structure to realize broadband asymmetric transmission(AT) for both linearly and circularly polarized waves in the near infrared spectral region. The structure composes of a silica substrate and two sand-clock-like gold layers on the opposite sides of the substrate. Due to the surface plasmons of gold, the structure shows that the AT parameters of linearly and circularly polarized waves can reach 0.436 and 0.403, respectively. Meanwhile, a broadband property is presented for the AT parameter is over 0.3 between 320 THz and 340 THz. The structure realizes a diode-like AT for linearly wave in forward and circularly wave in backward, respectively. The magnetic dipoles excited by current in the two gold layers contribute to the broadband AT. The current density in top and bottom metallic layers illustrates the mechanism of the polarization conversion for broadband AT in detail.     

Broadband and high efficiency terahertz metasurfaces for anomalous refraction and vortex beam generation

The applications of metasurfaces are currently a highly active research field due to their extraordinary ability to manipulate electromagnetic waves. The ultra-thin characteristics of metasurfaces allow the miniaturization and integration of metasurface devices. However, these devices work typically under a low efficiency and narrow bandwidth condition. In this work, we design eight multilayered unit cells with similar amplitudes and a phase interval of π/4, which convert the polarization states of the terahertz (THz) waves between two orthogonal directions. The average cross-polarized transmission amplitudes of these cells are all around 0.9 in an ultra-broad frequency range from 0.5 THz to 1.4 THz. Furthermore, unit cells are used to construct both an ultra-thin anomalous refraction metalens and a vortex phase plate. Our simulation results show that the anomalous refraction for the transmitted linear polarization component is comparable to the theoretical prediction, and the maximum error is determined to be below 4.8%. The vortex phase plate can also generate an ideal terahertz vortex beam with a mode purity of 90% and more. The distributions of longitudinal electric field, intensity, and phase illustrate that the generated vortex beam has excellent propagation characteristics and a weak divergence. Simulations of the two types of metasurface devices, based on the eight unit cells, exhibit very high efficiencies in a wide bandwidth. Our research will assist in the improvement in the practical applications of metasurfaces. It also provides a reference for the design of high efficiency and broadband devices that are applied to other frequency ranges.     

基于编码超表面的太赫兹宽频段雷达散射截面缩减的研究

本文设计了一种柔性, 非定向低散射的1bit编码超表面, 实现了太赫兹宽频带雷达散射截面的缩减. 这种设计基于对“0”和“1”两种基本单元进行编码, 其反射相位差在很宽的频段范围内接近180°, 为一种非周期的排列方式, 该电磁超表面使入射的电磁波发生漫反射, 从而实现雷达散射截面的缩减. 全波仿真结果表明, 在垂直入射条件下, 编码超表面的镜像反射率低于-10 dB的带宽频段范围为1.0-1.4 THz, 该带宽内超表面相对同尺寸金属板可将雷达散射截面所减量达到10 dB以上, 最大缩减量达到19 dB. 把柔性编码表面弯曲在直径为4 mm的金属圆柱面上, 雷达散射截面的所减量高于10 dB以上的带宽频段范围为0.9-1.2 THz, 仍然可实现宽频带缩减特性. 总之, 编码超表面为调控太赫兹波提供一种新的途径, 将在雷达隐身、成像、宽带通信等方面具有重要的意义.     

Broadband Terahertz Polarization Converter and Asymmetric Transmission Based on Coupled Dielectric‐Metal Grating

Coupled dielectric‐metal gratings are investigated for broadband terahertz (THz) wave polarization conversion and asymmetric transmission by the experiments and numerical simulations, which are composed of the subwavelength Si grating and metallic wire grating layers. The dielectric grating layer with a large artificial birefringence and low dispersion is employed as a phase engineered waveplate, and the metal wire grating arranged with a 45° angle to the dielectric grating is utilized as a high‐efficiency polarizer. Due to the subwavelength integration, this coupled grating presents a local resonance coupling mechanism between dielectric and metal gratings, which greatly enhances the polarization rotation and expands the bandwidth, not a simple combination with dielectric and metallic gratings. The results demonstrate that a broadband asymmetric transmission with an extinction ratio of 30dB from 0.2 to 1.2 THz is achieved and the highest transmission of 90% can be obtained. It provides a simple way towards practical applications for THz artificial dispersion materials, polarization control and asymmetric transmission.     

Dual-function terahertz metasurface based on vanadium dioxide and graphene

A dual-function terahertz metasurface based on VO₂ and graphene is proposed in this paper. It consists of a gold layer embedded with VO₂ patches, a SiO₂ spacer layer, a VO₂ layer, graphene and a SiO₂ spacer substrate. When the bottom VO₂ layer is in the metallic state, the designed metasurface can achieve absorption. When the top VO₂ patches are in the metallic state, the proposed metasurface can be used as a single-band absorber with terahertz absorptance of 99.7% at 0.736 THz. When the top VO₂ patches are in the insulating state, the designed structure behaves as a dual-band absorber with an absorptance of 98.9% at 0.894 THz and 99.9% at 1.408 THz. In addition, the absorber is polarization insensitive and keeps good performance at large angles of incidence. When the bottom VO₂ is in an insulating state, the metasurface shows electromagnetically induced transparency. The transparent window can be dynamically regulated by controlling the chemical potential of graphene. The proposed metasurface exhibits the advantages of terahertz absorption, electromagnetically induced transparency and dynamic control, which provides more options for the design of terahertz devices in the future.     

Real‐Time and Broadband Terahertz Wave Scattering Manipulation via Polarization‐Insensitive Conformal Graphene‐Based Coding Metasurfaces

Here, for the first time, the real‐time and broadband manipulation of terahertz (THz) waves are acquired by introducing a multifunctional graphene‐based coding metasurface (GBCM). The designed structure consists of subwavelength patterned graphene units whose operational statuses can be dynamically switched between two digital states of “0” and “1”. By engineering the spatial distribution of chemical potentials across the GBCM, various scattering patterns having single, two, four, and numerous reflection beams are elaborately achieved just within one planar structure. To compute the far‐field pattern of GBCM, an inverse discrete Fourier transform (IDFT) is established, providing a fast and efficient design method. The proposed GBCM provides a low reflection bellow ?10 dB over a broad frequency band ranging from 1 THz to 1.9 THz. In addition, the metasurface retains its low reflection behavior in a wide range of incident wave angles for both TE and TM polarizations. According to conformal invariance of graphene sheets, the stealth property of GBCM is well preserved while wrapping around a curved object. The proposed technique of real‐time scattering manipulation leads to multifunctional THz devices, opening new routes contributing to numerous applications such as imaging and stealth technology.     

基于开口椭圆环的高效超宽带极化旋转超表面

电磁波的极化态在信号传输和灵敏度测量中有非常重要的应用价值. 本文设计、仿真并实验验证了微波频段基于开口椭圆环谐振器的极化旋转超表面. 理论上, 将多阶表面等离子谐振和高阻抗表面相结合, 解释了多谐振点、高效率极化旋转的物理机理. 数值上, 通过对结构参数的仿真分析, 给出了运用开口椭圆环结构设计多频段、超宽带高效极化旋转超表面的方法. 所设计和制作的超表面能够在相对带宽104.5%的频率范围内实现大于85%的极化旋转效率. 这些工作将为极化操控超表面的设计和应用提供重要帮助.     

Ultra-wideband circular-polarization converter with micro-split Jerusalem-cross metasurfaces

An ultrathin micro-split Jerusalem-cross metasurface is proposed in this paper, which can efficiently convert the linear polarization of electromagnetic(EM) wave into the circular polarization in ultra-wideband. By symmetrically employing two micro-splits on the horizontal arm(in the x direction) of the Jerusalem-cross structure, the bandwidth of the proposed device is significantly extended. Both simulated and experimental results show that the proposed metasurface is able to convert linearly polarized waves into circularly polarized waves in a frequency range from 12.4 GHz to 21 GHz, with an axis ratio better than 1 d B. The simulated results also show that such a broadband and high-performance are maintained over a wide range of incident angle. The presented polarization converter can be used in a number of areas, such as spectroscopy and wireless communications.     

基于二氧化钒宽、窄带可切换的双功能超材料吸收器研究

本文提出了一种宽、窄带可切换的双功能超材料吸收器.在超材料吸收器的结构中,引入了相变材料二氧化钒(VO2),仅利用单个可切换超表面就能实现不同的功能,其不同功能之间的相互转换通过VO2绝缘态和金属态之间的可逆相变特性实现.当VO2处于金属态时,设计的结构可以看作一个超材料宽带吸收器.仿真结果表明,在1.55THz至2....     

基于极化旋转超表面的圆极化天线设计

本文通过设计出一种反射型极化旋转超表面,在8—12 GHz频域内实现高效的极化旋转,并将其加载于微带缝隙天线下方构成新型的极化旋转超表面天线,利用超表面的90°极化旋转效应,成功实现了天线的圆极化辐射调制.仿真与实验结果表明:圆极化天线的中心工作频率为GHz,阻抗带宽为8.3—10 GHz.当微带缝隙天线与极化旋转超表面的间距H=4.5mm时,天线在8.3—8.8 GHz频带内实现了圆极化辐射;当mm时,天线在8.8—9.3 GHz频带内实现了圆极化辐射;当=8mm时,天线在9.3—10 GHz频带内实现了圆极化辐射.实验结果与仿真结果相符,证明了此种设计方法的有效性,也为微带缝隙天线的圆极化设计提供了一种新的途径.