一种不受相位噪声影响的模态参数识别法

本文提出了一种根据幅值频响数据来识别模态参数的频域识别法.该方法首先通过识别幅值频响函数模型来得到传递函数的零点和极点.鉴于不同结构系统可以有完全相同的幅值频响函数,文中提出了由相位频响数据来判定传递函数零点的号性,以唯一确定传递函数,从而消除了相位噪声对模态参数识别结果的影响.作为例子,文中给出了计算机模拟实验例子和滚动轴承支承动态参数识别的应用实例.     

船舶结构优化设计方法的研究进展

船舶结构设计，具有较强的综合性、经验性和创造性。运用经典优化方法加以处理，虽然也取得了一定成果，但要建立真正有效的船舶结构优化设计方法，必须与实际工程特点、现代数学理论以及最新计算机技术有机结合。目前，研究工作已取得了初步进展。本文综述了有关研究情况。     

O_2在Si掺杂石墨烯上吸附与活化

采用包含色散力校正的密度泛函理论方法(DFT-D)研究了O2在Si掺杂石墨烯(Si-Gra)上吸附与活化.研究结果表明:1)与纯净石墨烯相比,Si掺杂极大的增强了石墨烯对O2的吸附能力.O2的最稳定吸附构型是以Side-on模式吸附在掺杂的Si的顶位,形成O-Si-O三元环.次稳定吸附构型是与Si及近邻的一个C形成O-Si-C-O四元环结构.两个吸附构型对应的吸附能分别为-2.40和-1.93eV;2)O2有两种分解路径:直接分解路径(势垒为0.53eV)和整体扩散后的分解路径(势垒为0.81eV);3)分解之后的两个O原子分别吸附在Si的顶位和相邻碳环的两个碳原子的桥位;4)电子结构分析表明吸附的O2从Si-Gra获得较多电荷,从而被活化.总之,Si-Gra具有较强的催化氧气还原能力,是一种潜在的良好的非金属氧还原催化剂.     

碳纳米管阵列水渗透性质的研究

碳纳米管阵列组成的碳纳米管分子膜在生物学分子器件等方面有重要应用. 本文利用分子动力学方法计算研究水分子对(11, 11)碳纳米管阵列的渗透过程. 结果发现, 只有当阵列间隙面积大于57.91 Ų时, 水分子才能进入阵列间隙中, 并揭示了碳管内部、阵列间隙内水分子结构随相邻碳管间距变化的演化趋势以及管内外水分子电偶极矩的分布特性.     

燃料电池用聚合物质子交换膜的研究进展

质子交换膜（PEM）是质子交换膜燃料电池的核心组件之一,具有隔绝阴阳极、提供质子传递通道和阻止燃料渗透的作用. 商业化应用的全氟磺酸PEM存在燃料渗透严重、高温条件下导电性差和成本高的问题,开发性能优良的聚合物PEM显得很有必要. 本文讨论了近年来聚合物PEM的研究进展,分别从聚合物的主链、支链和交联结构角度介绍了分子结构对薄膜相分离、质子导电性、稳定性和电池性能等性能的影响,并讨论了聚合物分子结构设计方面存在的问题,最后对燃料电池用聚合物PEM在未来的发展方向进行了展望.     

The structure and the potential energy function of AlSO(C_S,X~2A″)

By using the B3P86/aug-cc-pvtz method,the accurate equilibrium geometry of the AlSO(CS,X2A″) molecule has been calculated and compared with available theoretical values.The obtained results show that the AlSO molecule has a most stable structure with bond lengths of R OAl = 0.1864 nm,R OS = 0.1623 nm,R AlS = 0.2450 nm,together with a dissociation energy of 13.88 eV.The possible electronic states and their reasonable dissociation limits for the ground state of the AlSO molecule were determined based on the principle of atomic and molecular reaction statics.The analytic potential energy function of the AlSO molecule was derived by the many-body expansion theory and the contour lines were constructed for the first time,which show the internal information of the AlSO molecule,including the equilibrium structure and stable point.The analysis demonstrates that the obtained potential energy function of AlSO is reasonable and successful and the present investigations provide important insights for further study on molecular reaction dynamics.     

Spectroscopic investigations on NO+(x1∑+,a3∑+,A1Ⅱ) ion using multi-reference configuration interaction method and correlation-consistent sextuple b

Three low-lying electronic states (x¹∑⁺,a³∑⁺,and A¹Ⅱ) of NO⁺ ion are studied using the complete active space self-consistent-field (CASSCF) method followed by highly accurate valence internally contracted multi-reference configuration interaction (MRCI) approach in combination of the correlation-consistent sextuple basis set augmented with diffuse functions, aug-cc-pV6Z. The potential energy curves (PECs) of the NO⁺(x¹∑⁺,a³∑⁺,A¹Ⅱ) are calculated. Based on the PECs, the spectroscopic parameters R_e, D_e, ω_e, ω_eχ_e, α _e, B_e, and D₀ are reproduced, which are in excellent agreement with the available measurements. By numerically solving the radial Schrödinger equation of nuclear motion using the Numerov method, the first 20 vibrational levels, inertial rotation and centrifugal distortion constants of NO⁺(x¹∑⁺,a³∑⁺,A¹Ⅱ) ion are derived when the rotational quantum number J is equal to zero (J = 0) for the first time, which accord well with the available measurements. Finally, the analytical potential energy functions of these states are fitted, which are used to accurately derive the first 20 classical turning points when J = 0. These results are compared in detail with those of previous investigations reported in the literature.     

基于改进HHT的水中爆炸冲击波信号时频特性分析方法

根据水中爆炸冲击波信号的特征,利用希尔伯特-黄变换(HHT)处理非平稳信号的优势,提出了一种结合小波分解及相关系数筛选的改进HHT方法.该方法首先通过小波分解将信号分为高频部分和低频部分,然后利用相关系数对固有模态函数(IMF)分量进行筛选.理论与实践表明,改进的HHT方法能够有效、准确地对水中爆炸冲击波信号的时频信息...     

线性代数教材改革指导思想探析

论述线性代数教材改革的必要性及其指导思想,主张线性代数教材建设应以矩阵为主线,以教育部颁发的硕士研究生人学考试线性代数部分的大纲为纲,结合教学现代化的现状,强调几何与代数相结合,重视代数学思想方法的渗透,化抽象为具体,同时在教学中还要引入数学建模的思想．     

制备均一性靶丸过程中的影响因素

在激光聚变实验中,高球形度、高厚度均一性的靶丸经常通过乳液微封装方法来制备。利用T.Norimatsu的模型研究在靶丸制备过程中,界面间表面张力、油相粘度、壳层尺寸、壳层厚度的影响。结果显示:较大的表面张力,较小的壳层尺寸,会使胶囊具有更好的均一性。当外部变形形式不同的时候,油相的粘度对于壳层均一性会有不同作用。