Molecular structure and analytical potential energy function of SeCO

The density functional method(B3P86/6-311G) is used for calculating the possible structures of SeC, SeO, and SeCO molecules. The result shows that the ground state of the SeC molecule is1Σ, the equilibrium nuclear distance is RSeC= 0.1699 nm, and the dissociation energy is De = 8.7246 eV. The ground state of the SeO molecule is3Σ, with equilibrium nuclear distance RSeO= 0.1707 nm and dissociation energy De = 7.0917 eV. There are two structures for the ground state of the SeCO molecule: Se=C=O and Se=O=C. The linear Se=C=O is1Σ. Its equilibrium nuclear distances and dissociation energy are RSeC= 0.1715 nm, RCO= 0.1176 nm and 18.8492 eV, respectively. The other structure Se=O=C is1Σ. Its equilibrium nuclear distances and dissociation energy are RCO= 0.1168 nm, RSeO= 0.1963 nm and 15.5275 eV,respectively. The possible dissociative limit of the SeCO molecule is analyzed. The potential energy function for the SeCO molecule has been obtained from the many-body expansion theory. The contour of the potential energy curve describes the structure characters of the SeCO molecule. Furthermore, contours of the molecular stretching vibration based on this potential energy function are discussed.     

The analytical potential energy function of flue gas SO₂（X¹A₁）

The equilibrium structure of flue gas SO 2 is optimized using the density functional theory (DFT)/ B3P86 method and CC-PV5Z basis. The result shows that it has a bent (C2V ,X1A1) ground state structure with an angle of 119.1184 . The vibronic frequencies and the force constants are also calculated. Based on the principles of atomic and molecular reaction statics (AMRS), the possible electronic states and reasonable dissociation limits for the ground state of SO2 molecule are determined. The potential functions of SO and O2 are fitted by the modified Murrell–Sorbie+c6 (M-S+c6) potential function and the fitted parameters, the force constants and the spectroscopic constants are obtained, which are all close to the experimental values. The analytic potential energy function of the SO2 (X1A1) molecule is derived using the many-body expansion theory. The contour lines are constructed, which show the static properties of SO2 (X1A1), such as the equilibrium structure, the lowest energies, the most possible reaction channel, etc.     

Theoretical study of the structure and analytic potential energy function for the ground state of the PO2 molecule

In this paper, the energy, equilibrium geometry, and harmonic frequency of the ground electronic state of PO2 are computed using the B3LYP, B3P86, CCSD（T）, and QCISD（T） methods in conjunction with the 6-311＋＋G（3df, 3pd） and cc-pVTZ basis sets. A comparison between the computational results and the experimental values indicates that the B3P86/6-311＋＋G（3df, 3pd） method can give better energy calculation results for the PO2 molecule. It is shown that the ground state of the PO2 molecule has C2v symmetry and its ground electronic state is X2A1. The equilibrium parameters of the structure are Rp-o = 0.1465 am, ZOPO = 134.96°, and the dissociation energy is Ed = 19.218 eV. The bent vibrational frequency Ul = 386 cm-1, symmetric stretching frequency v2 = 1095 cm-1, and asymmetric stretching frequency ua = 1333 em-1 are obtained. On the basis of atomic and molecular reaction statics, a reasonable dissociation limit for the ground state of the PO2 molecule is determined. Then the analytic potential energy function of the PO2 molecule is derived using many-body expansion theory. The potential curves correctly reproduce the configurations and the dissociation energy for the PO2 molecule.     

The molecular structure and analytical potential energy function of HCO （X^2A＇）

In this paper the equilibrium structure of HCO has been optimized by using density functional theory （DFT）/ B3P86 method and CC-PVTZ basis. It has a bent （Cs, X^2A＇） ground state structure with an angle of 124.4095 °. The vibronic frequencies and force constants have also been calculated. Based on the principles of atomic and molecular reaction statics, the possible electronic states and reasonable dissociation limits for the ground state of HCO molecule have been determined. The analytic potential energy function of HCO （X^2A＇） molecule has been derived by using the many-body expansion theory. The contour lines are constructed, which show the static properties of HCO （X^2A＇）, such as the equilibrium structure, the lowest energies, etc. The potential energy surface of HCO （X^2A＇） is reasonable and very satisfactory.     

Theoretical study of the structure and analytic potential energy function for the ground state of the PO₂ molecule

In this paper, the energy, equilibrium geometry, and harmonic frequency of the ground electronic state of PO2 are computed using the B3LYP, B3P86, CCSD(T), and QCISD(T) methods in conjunction with the 6-311++G(3df, 3pd) and cc-pVTZ basis sets. A comparison between the computational results and the experimental values indicates that the B3P86/6-311++G(3df, 3pd) method can give better energy calculation results for the PO 2 molecule. It is shown that the ground state of the PO2 molecule has C2v symmetry and its ground electronic state is X2 A1 . The equilibrium parameters of the structure are R P O = 0.1465 nm, ∠OPO = 134.96°, and the dissociation energy is Ed = 19.218 eV. The bent vibrational frequency ν 1 = 386 cm-1 , symmetric stretching frequency ν 2 = 1095 cm-1 , and asymmetric stretching frequency ν 3 = 1333 cm-1 are obtained. On the basis of atomic and molecular reaction statics, a reasonable dissociation limit for the ground state of the PO2 molecule is determined. Then the analytic potential energy function of the PO2 molecule is derived using many-body expansion theory. The potential curves correctly reproduce the configurations and the dissociation energy for the PO2 molecule.     

The analytical potential energy function of flue gas SO2（X1A1）

The equilibrium structure of flue gas SO2 is optimized using the density functional theory （DFT）/B3P86 method and CC-PV5Z basis. The result shows that it has a bent （C2v, X1A1） ground state structure with an angle of 119.1184°. The vibronic frequencies and the force constants are also calculated. Based on the principles of atomic and molecular reaction statics （AMIIS）, the possible electronic states and reasonable dissociation limits for the ground state of SO2 molecule are determined. The potential functions of SO and 02 are fitted by the modified Murrell-Sorbie＋c6 （M-S＋c6） potential function and the fitted parameters, the force constants and the spectroscopic constants are obtained, which are all close to the experimental values. The analytic potential energy function of the SO2 （X1A1） molecule is derived using the many-body expansion theory. The contour liues are constructed, which show the static properties of SO2 （XIA1）, such as the equilibrium structure, the lowest energies, the most possible reaction channel, etc.     

Ab initio calculations of accurate dissociation energy and analytic potential energy function for the second excited state B1∏ of 7LiH

The reasonable dissociation limit of the second excited singlet state B¹∏ of ⁷LiH molecule is obtained. The accurate dissociation energy and equilibrium geometry of the B¹\Pi state are calculated using a symmetry-adapted-cluster configuration--interaction method in full active space. The whole potential energy curve for the B¹∏ state is obtained over the internuclear distance ranging from about 0.10nm to 0.54nm, and has a least-square fit to the analytic Murrell--Sorbie function form. The vertical excitation energy is calculated from the ground state to the B¹∏ state and compared with previous theoretical results. The equilibrium internuclear distance obtained by geometry optimization is found to be quite different from that obtained by single-point energy scanning under the same calculation condition. Based on the analytic potential energy function, the harmonic frequency value of the B¹∏ state is estimated. A comparison of the theoretical calculations of dissociation energies, equilibrium interatomic distances and the analytic potential energy function with those obtained by previous theoretical results clearly shows that the present work is more comprehensive and in better agreement with experiments than previous theories, thus it is an improvement on previous theories.     

Ab initio calculations on accurate dissociation energy, equilibrium geometry, and analytic potential energy function for the 6~3Π state of ~7LiH molecule

The accurate dissociation energy and equilibrium geometry of the 63Π state of 7LiH molecule is calculated using a symmetry-adapted-cluster configuration-interaction method in full active space. And the calculated results are 0.2580 eV and 0.1958 nm for the dissociation energy and equilibrium geometry, respectively. The whole potential energy curve for the 63Π state is also calculated over the internuclear separation range from about 0.10 to 0.54 nm. The results are fitted by the Murrell-Sorbie function. It is found that the Murrell-Sorbie function form, which is mainly used to fit the ground-state potential energy function, is well suitable for the excited triplet b3Π state. The vertical excitation energy from the ground state to the 63Π state is calculated to be 4.233 eV. Based on the analytic potential energy function, the harmonic frequency of 610.88 cm-1 about this state is firstly estimated. Compared with other theoretical results, this work is the most complete effort to deal with the analytic potential energy function and the harmonic frequency of this state.     

Analytical Potential Energy Function for the Ground State X1∑+ of Lanthanum Monofluoride

The equilibrium geometry, harmonic frequency and bond dissociation energy of lanthanum monofluoride have been calculated using Density-Functional Theory (DFT), post-HF methods MP2 and CCSD(T) with the energyconsistent relativistic effective core potentials. The possible electronic state and reasonable dissociation limit of the ground state of LaF are determined based on atomic and molecular reaction statics. Potential energy curve scans for the ground state X 1∑+ have been performed at B3LYP and CCSD(T) levels, due to their better results of harmonic frequency and bond dissociation energy. We find that the potential energy calculated with CCSD(T) is about 0.6 eV larger than the bond dissociation energy, when the internuclear distance is as large as 0.8 nm. The problem that single-reference ab initio methods do not meet dissociation limit during calculations of lanthanide heavy-metal elements is analyzed. We propose the calculation scheme to derive the analytical Murrell-Sorbie potential energy function. Vibrotational spectroscopic constants Be, ωe, ωeχe, αe, βe, De and He obtained by the standard Dunham treatment coincide well with the results of rotational analyses on spectroscopic experiments.     

Potential energy surfaces of ozone in the ground state

Equilibrium parameters of ozone, such as equilibrium geometry structure parameters, force constants and dissociation energy are presented by CBS-Q {\it ab initio} calculations. The calculated equilibrium geometry structure parameters and energy are in agreement with the corresponding experimental values. The potential energy function of ozone with a C离解能;空气;能量表面;地面ozone, potential energy surface, barrier, dissociation energyProject supported by the National Natural Science Foundation of China (Grant Nos~10376021 and 10676025), and the Scientific Research Fund of Sichuan Provincial Education Department, China (Grant No~2006A131).2006-10-08Equilibrium parameters of ozone, such as equilibrium geometry structure parameters, force constants and dissociation energy are presented by CBS-Q ab initio calculations. The calculated equilibrium geometry structure parameters and energy are in agreement with the corresponding experimental values. The potential energy function of ozone with a C2v symmetry in the ground state is described by the simplified Sorbie-Murrell many-body expansion potential function according to the ozone molecule symmetry. The contour of bond stretching vibration potential of an O3 in the ground state, with a bond angle （θ） fixed, and the contour of O3 potential for O rotating around O1-O （R1）, with O1-O bond length taken as the one at equilibrium, are plotted. Moreover, the potentials are analysed.     

PdCO分子结构与势能函数

用密度泛函理论的B3LYP方法,对钯原子采用LANL2DZ收缩价基函数,碳原子和氧原子采用AUG-cc-pVTZ基组,对PdC,PdO和PdCO体系的结构进行优化,计算表明：PdC分子基态为¹Σ⁺态,键长为R_e=0.17285nm,离解能为4.919eV.PdO分子基态的平衡核间距为0.18546nm,其电子态为³Π,离解能为2.455eV,并拟合得到Murrell-Sorbie势能函数;PdCO分子有两 关键词： PdCO 分子结构 势能函数     

SiF$lt;sub$gt;2$lt;/sub$gt;基态分子的结构与势能函数

运用Gaussian03软件包,采用密度泛函理论中的B3P86 方法,结合6-311++G^**（3df,3pd） 基组对基态SiF₂分子的平衡电子结构和谐振频率进行了优化计算,得到了其稳定结构为C_2v构型.SiF₂基态电子态为X¹A₁,平衡核间距R_Si—F=0.1061　nm,键角α_F—Si—F=100.6762°,离解能D_e=13.8　eV.应用多体项展式理论推导了基态SiF₂分子的解析势能函数,其等值势能图准确地再现了SiF₂分子的平衡构型特征和能量变化. 关键词： 2')" href="#">SiF₂ Murrell-Sorbie函数 多体项展式理论     

SiO2分子的基态(X1A1)结构与分析势能函数

应用群论及原子分子反应静力学方法推导了SiO₂分子的电子态及其离解极限，采用B3P86方法，在6-311G^**水平上,优化出SiO₂基态分子稳定构型为单重态的C_2V构型，其平衡核间距R_e=R_Si—O=0.1587 nm,∠OSiO＝111.2°,能量为-440.4392 a.u..同时计算出基态的简正振动频率:对称伸缩振动频率ν(B₂)=945.4cm^-1，弯曲振动频率ν(A₁)=273.5 cm^-1和反对称伸缩振动频率ν(A₁)=1362.9cm^-1.在此基础上，使用多体项展式理论方法，导出了基态SiO₂分子的全空间解析势能函数，该势能函数准确再现了SiO₂(C_2V)平衡结构.     

SiOH和HSiO分子的结构与势能函数

使用B3P86/6-311++G**方法对SiOH/HSiO(C_S,X²A′)基态分子进行几何优化,得到了SiOH/HSiO分子的平衡几何构型和力常数.根据原子分子反应静力学原理得到SiOH分子可能的电子状态和离解极限.应用多体展式理论方法推导出了SiOH基态分子的解析势能函数. 关键词： 分子结构 解析势能函数 多体展式理论     

AlOH(CS，X1A′)分子的结构与势能函数

使用MP4方法,在6-311G(3df,3pd)基组水平上对AlOH(C_S,X¹A′)基态分子进行了几何优化,得到了它的平衡几何构型和力常数.根据原子分子反应静力学原理得到AlOH分子的电子状态和可能的离解极限.应用多体展式理论方法推导出了AlOH基态分子的解析势能函数. 关键词： AlOH 分子结构 解析势能函数 多体展式理论     

Theoretical study of structure and analytic potential energy function for the ground state of PO2 molecule

In this paper, the energy, the equilibrium geometry, and the harmonic frequency of the ground electronic state of PO₂ are computed using B3LYP, B3P86, CCSD(T), and QCISD(T) methods in conjunction with 6-311++G(3df, 3pd) and cc-pVTZ basis sets. A comparison between the computational results and the experimental values indicates that the B3P86/6-311++G(3df, 3pd) method can give better energy calculation results for the PO₂ molecule. It is shown that the ground state of the PO₂ molecule has C_2v symmetry and its ground electronic state is X²A₁. The equilibrium parameters of the structure are R_P-O=0.1465 nm, d=19.218 eV. The bent vibrational frequency ν₁=386 cm^-1, the symmetric stretching frequency ν₂=1095 cm^-1, and the asymmetric stretching frequency ν₃=1333 cm^-1 are obtained. On the basis of atomic and molecular reaction statics, the reasonable dissociation limit for the ground state of the PO₂ molecule is determined. Then the analytic potential energy function of the PO₂ molecule is first derived by using the many-body expansion theory. The potential curves correctly reproduce the configurations and the dissociation energy for the PO₂ molecule.     

LiO2(C2V，X2A2)分子的结构与势能函数

使用二次组态相互作用方法，在aug-cc-pvtz基组水平上对LiO₂(C_2V，X²A₂)基态分子进行了几何优化，得到了它的平衡几何构型和力常数.根据原子分子反应静力学原理得到可能的电子状态和离解极限.应用多体展式理论方法推导出了LiO₂(C_2V，X²A₂)基态分子的解析势能函数.     

BH2的分子结构和势能函数

采用密度泛函理论(DFT)的B3P86方法和相对论有效原子实势理论模型(RECP)，对BH₂，BH₂⁺和BH₂^-分子进行了优化，得到这些分子基态的电子状态分别是²A′，³A′，³A″. 计算也得到了BH₂的分子结构和势能函数，它的离解能是7.752eV，BH₂分子具有C_{2V关键词： 2}')" href="#">BH₂ 分子结构 势能函数