Optics for the lattice of the compact storage ring for a Compton X-ray source

We present two types of optics for the lattice of a compact storage ring for a Compton X-ray source. The optics design for different operation modes of the storage ring are discussed in detail. For the pulse mode optics, an IBS-suppression scheme is applied to optimize the optics for lower IBS emittance growth rate; as for the steady mode, the method to control momentum compact factor is adopted [Gladkikh P, Phys. Rev. ST Accel. Beams 8, 050702] to obtain stability of the electron beam.     

TW Laser system for Thomson scattering X-ray light source at Tsinghua University

A TW (Tera Watt) laser system based on Ti:sapphire mainly for the Tsinghua Thomson scattering X-ray light source (TTX) is being built. Both UV (ultraviolet) laser pulse for driving the photocathode radiofrequency (RF) gun and the IR (infrared) laser pulse as the electron-beam-scattered-light are provided by the system. Efforts have also been made in laser pulse shaping and laser beam transport to optimize the high-brightness electron beam production by the photocathode RF gun.     

Design of an MeV ultra-fast electron diffraction experiment at Tsinghua university

Time-resolved MeV ultra-fast electron diffraction (UED) is a powerful tool for structure dynamics studies. In this paper, we present a design of a MeV UED facility based on a photocathode RF gun at Tsinghua University. Electron beam qualities are optimized with numerical simulations, indicating that resolutions of 250 fs and 0.01 , and bunch charge exceeding 105 electrons are expected with technically achievable machine parameters. Status of experiment preparation is also presented.     

A simulation study of Tsinghua Thomson scattering X-ray source

Thomson scattering X-ray sources are compact and affordable facilities that produce short duration, high brightness X-ray pulses enabling new experimental capacities in ultra-fast science studies, and also medical and industrial applications. Such a facility has been built at the Accelerator Laboratory of Tsinghua University, and upgrade is in progress. In this paper, we present a proposed layout of the upgrade with design parameters by simulation, aiming at high X-ray pulses flux and brightness, and also enabling advanced dynamics studies and applications of the electron beam. Design and construction status of main subsystems are also presented.     

Optics for the lattice of the compact storage ring for a Compton X-ray source

We present two types of optics for the lattice of a compact storage ring for a Compton X-ray source. The optics design for different operation modes of the storage ring are discussed in detail. For the pulse mode optics, an IBS-suppression scheme is applied to optimize the optics for lower IBS emittance growth rate; as for the steady mode, the method to control momentum compact factor is adopted [Gladkikh P, Phys. Rev. ST Accel. Beams 8, 050702] to     

清华大学汤姆逊散射超短脉冲X射线源研究

 介绍了清华大学加速器实验室近年来关于汤姆逊散射超短X射线源的研究工作;研究了在任意散射角度下电子束参数和激光束参数对散射光子参数的影响,给出了散射光子的参数如光子产额、脉冲长度、时间抖动等与电子束参数、激光束参数和散射角度的关系;利用实验室已有的16 MeV反波行波加速器与中国工程物理研究院激光聚变研究中心提供的ns调Q激光搭建了汤姆逊散射初步实验平台并开展了实验研究;加工了1.6-cell光阴极微波电子枪,搭建了高功率实验平台,对产生的电子束参数进行了初步测量;对汤姆逊散射超短X射线源进行了设计并开展了相关的平台建设工作,对产生的X射线脉冲参数进行了模拟。     

用于宽带高功率微波辐射的双层贴片天线特性

 研究了用于宽带高功率微波辐射的双层贴片微带天线输入阻抗带宽和辐射特性,提出一种适合于高功率微波辐射的圆锥传输线馈电结构以减小传统馈电探针的引线感抗,使天线的功率容量提高到百MW级,同时作为同轴线到径向传输线的过渡变换,使反射系数降低近50%。通过数值计算分析了不同的介质基底厚度组合和贴片尺寸对天线带宽的影响,优化参数后的天线带宽达到了34.9%(电压驻波比小于3),带内平均增益高于6.5 dB,最大增益8.3 dB,主辐射方向上的远场辐射因子与馈入宽带脉冲幅度比值大于1.3。分析了天线的功率容量,模拟计算表明该天线可用于辐射幅值300 kV的宽带高功率微波。     

用于频域方法测量超短电子束纵向分布的Kramers-Kronig变换研究

Kramers-Kronig（K-K）变换方法被广泛地应用于频域测量中还原超短电子束团分布,成为分析电子束团形状、长度等参量的有效工具.研究发现,利用该方法分析电子束参量时,自相干曲线基底的选择、低频损耗与高频截止及插值外推位置的选择,对束团参量有重要的影响.以清华大学加速器实验平台采用相干渡越辐射测试束团长度为例,分析了上述参量的选取对测量结果的影响,讨论了选择K-K变换的关键物理参量的方法.     

利用场分布计算单腔微波参量

介绍了利用加速管的场分布计算单腔微波参量的一种方法. 在已知耦合腔链各本征模式的谐振频率和电场分布的条件下，可以通过回路方程组求出耦合腔链的单腔频率和腔间耦合系数. 这种方法给加速管设计和调谐带来了很大帮助，在加速腔数目较多或者结构非均匀的条件下尤为有效.     

汤姆逊硬X射线源中锁模脉冲激光稳频方法

 汤姆逊硬X射线源中，光阴极微波电子枪要求触发激光脉冲与腔中微波场相位的精确时间同步。理论分析了锁模脉冲激光器相位噪声，探讨了对激光脉冲相位探测和控制的方法，并通过实验构建了激光相位抖动测量系统和锁相环稳频回路，用基频鉴相信号驱动压电陶瓷晶体改变谐振腔长，实现了从开环3.42 ps到闭环1.46 ps的均方根相位抖动的测量和控制。