国产航空有机玻璃(PMMA)的非线性应力松弛行为研究

实验测定了国产航空有机玻璃PMMA在室温(20℃)、3—20.45％应变量范围内的应力松驰曲线。将用于表述中低应变率下加卸载循环的应力—应变行为的非线性本构理论,也即以考虑弹性和粘弹性变形的标准线性体和考虑塑性变形的活化粘壶作串联耦合的本构模型扩展应用到应力松弛状态,给出了相应的本构理论方程。对实验测得的应力松弛曲线进行数值拟合计算,吻合结果良好。表明所提出的本构模型也适用于描述PMMA的非线性应力松弛行为。得到了平衡态的应力一应变曲线,曲线的单调变化,表明不存在屈服极大值及以后的应变软化效应。     

Effect of cyclic loading on tensile properties of PC and PC/ABS

The effects of cyclic loading on tensile fracture properties of polycarbonate (PC) and the alloy of polycarbonate and acrylonitrile-butadiene-styrene (PC/ABS) are experimentally investigated in the paper. Two digital cameras are used to record simultaneously the tensile deformation of specimens and the large deformation and the necking process of these polymers are discussed. Two lateral contractions are not identical at the later tensile stages and the contraction ratios in each lateral direction are related with the tensile strains in axial direction on width and thickness surface. The curvature radiuses at the minimum section during necking process are shown. The volume increases during necking process and then decreases gradually. The yield stress and fracture stress of PC/ABS are lower than that of PC. The degradation of the fracture stress and fracture strain due to the application of cyclic loading is larger for PC than that for PC/ABS, and these can be used to explain qualitatively why PC has higher fatigue crack growth rate than PC/ABS.     

Unimodal and bimodal networks of poly(dimethyl-siloxane) in pure shear

Model networks of poly(dimethylsiloxane) (PDMS) were prepared by tetrafunctionally endlinking hydroxyl-terminated chains of various molecular weights. Some networks were prepared from mixtures of chains so as to yield a bimodal distribution of network chain lengths and, in some cases, these networks were prepared in solution. The stress–strain behavior of these unimodal and bimodal networks was studied in pure shear, which was imposed by stretching a sheet of the network having a large ratio of width to length in the direction perpendicular to the width. The pure-shear moduli of both types of networks generally were found to depend markedly on strain. Stress–strain isotherms for unimodal networks prepared from chains of one or the other of two molecular weights were well interpreted using the constrained-junction model of Flory and Erman. The bimodal networks showed large increases in the pure-shear modulus at high strains which were similar to those reported for uniaxial extension and compression. Endlinking in solution decreases the modulus in general and its upturn in particular, presumably because of diminished chain-junction entangling.     

自体静脉移植血管的拉伸实验研究

本文考察了自体移植静脉的纵向应力应变关系。将狗股静脉移植于股动脉，在术后不同时间切取移植静脉进行纵向单轴拉伸实验。结果表明，移植静脉的应力－应变曲线比正常静脉靠近应力坐标轴并在术后逐渐向左移动。这显示了移植血管管壁组织在术后的逐渐硬化。     

Mathematical Modeling of the Stress-Strain State of Adhesive Layers in Sandwich Structures

The studies on theoretical modeling of a sandwich shell (SS) and sandwich beam (SB) are presented in this paper. The displacements of adhesive layers are computed in the whole SS. The Euler-Ostrogradskii equations are used to derive the equations of equilibrium, which contain six 16th-order differential equations. The three-point bending of a sandwich beam is considered and the behavior of the adhesive layer of the SB is calculated.     

The rheological properties of the arterial wall

Key words The rheological properties of rat arteries were studied in vitro. Using intact arterial segments undergoing large deformations in longitudinal and circumferential direction, both the stress-strain relationship and the corresponding histological changes with deformation are presented. Correlations between the mechanical properties and the histological structure are discussed.     

Ermittlung von Fließkurven in verschiedenen Ausführungsformen des Stauchversuches

Several modifications of the upsetting test at room temperature are discussed under the aspect of suppressing friction and other possible sources of error.In the upsetting test according to Rastegaev, friction is reduced, and the testpiece remains cylindrical up to high strains, however the specimen's height is determined with a large error. Therefore it is proposed to measure the increase of the specimen's diameter instead of the reduction of height.Upsetting under sticking friction conditions can formally be treated like upsetting with lubrication for calculating the stress-strain curve. However, the applicability and the limits of this method have not yet been studied sufficiently.In the plane-strain upsetting test, friction is not suppressed completely, but the error of height measurement propagates only weakly into the calculated stress-strain curve.

     

多孔NiTi形状记忆合金的力学性能的实验研究

本文介绍了NiTi形状记忆合金的应用前景,利用MTS材料试验机研究经过热处理的多孔NiTi合金在压缩时的应力一应变曲线,结果表明,在一定的热处理后,多孔NiTi合金具有形状记忆效应,同样利用差热分析仪也证明了这一特性,因此,这种合金在一定程度上满足生物医用材料的医学使用条件。     

土的工程力学性质的颗粒流模拟

基于颗粒流理论,引入不同的颗粒接触连接本构模型,分别建立了砂土和粘性土的颗粒流模型．通过颗粒流数值模型试验,对砂土和粘性土的室内平面应变试验及其剪切带形成和发展进行了数值模拟,分别对比了不同围压下颗粒流试样与室内试验的应力应变关系曲线,基本再现了砂土和粘性土试样应力．应变关系．通过砂土和粘性土PFC试样剪切带模拟表明,当围压较小时试样内部颗粒位移量小而且分布范围较广,当围压增大时,试样内部颗粒位移量也增大,而且发生较大位移颗粒的分布范围趋于集中,同时随着围压的增大试样内部形成明显的剪切带．无论砂土还是粘性土的PFC试样,随着围压的增加剪切带的形状趋于集中,而且剪切带宽度在减小．在围压很小时,试样内形成大的破坏区域,在围压较大时出现明显的线破坏区．这些规律基本与室内试验结果相似。     

固态高聚物的屈服和塑性变形行为

固态高聚物屈服和塑性变形的固体力学研究主要包括两个方面:①研究这类材料产生屈服和塑性变形的条件及其具体的行为特征;②从整体上分析其应力应变行为,力求建立起相应的本构关系方程。本文将对这一领域的研究发展状况作一述评,并简要介绍我们最近取得的一些成果。内容包括屈服变形的现象与特征,屈服准则,取向材料的变形行为,热激活塑性变形理论,材料的本构方程,以及我们提出的粘弹塑性理论模型与本构方程。