Applicability of normal and shear stress cells embedded in cohesionless materials

A normal stress cell and a shear stress cell have been designed and tested under very varied conditions including permanent strain. Results pooled from nine different tests with the cells embedded in cohesionless materials (sand and wheat) showed that the coefficient of variation of the normal stress-cell sensitivity was 0.04, while it was 0.10 for the shear cell. The agreement between predicted and measured sensitivity was considered to be good for the normal stress cell and reasonably good for the shear stress cell. The shear cell showed a systematic dependence, within acceptable limits, of the total stress state in the surrounding material. A qualitative explanation of this phenomenon is given. Paper was presented at the SEM VI International Congress on Experimental Mechanics held in Portland, OR in June 6–10, 1988.     

THE NONLINEAR MAGNETOELASTIC PROPERTIES OF 〈 110 〉 ORIENTED TBo.27DYo.73FE1.95 POLYCRYSTALLINE ALLOYS UNDER COUPLED MAGNETOMECHANICAL LOADING

In the paper, the nonlinear magnetoelastic properties of composition Tb0.27Dy0.73 Fel.95 〈 110 〉 oriented polycrystalline alloys are investigated under coupled loads of high mag- netic field and compressive stress. The magnetization and magnetostriction are measured simul- taneously under applied magnetic field from -800 to 800 kA/m and compressive stress from 0 to 25 MPa at room temperature. The strain coefficient and relative permeability are obtained by differential calculation from the experimental curves. The results show that the values of satura- tion magnetization （M~） under different compressive stresses remain invariably constant in the region of the high magnetic field. The saturation magnetostriction （As） increases with increasing compressive stress and reaches 1680 ~ 10-6 under 25 MPa. According to the increase of the com- pressive stress, the hysteretic loop area of magnetization and magnetostriction increases, while the maximum relative permeability and strain coefficient decrease. Additionally, the influence of the bias magnetic field on the mechanical property is taken into account. The stress-strain relation- ship is nonlinear and sensitive to the applied external magnetic fields along the axis of rod. The results obtained are a useful complement to the existing experiments for theoretical approaches and engineering applications.     

单轴拉伸条件下细观非均匀性岩石损伤局部化和应力应变关系分析

岩石在拉应力状态下的力学特性不同于压应力状态下的力学特性．利用细观力学理论研究了细观非均匀性岩石拉伸应力应变关系包括:线弹性阶段、非线性强化阶段、应力降阶段、应变软化阶段.模型考虑了微裂纹方位角为Weibull分布和微裂纹长度的分布密度函数为Rayleigh函数时对损伤局部化和应力应变关系的影响,分析了产生应力降和应变软化的主要原因是损伤和变形局部化.通过和实验成果对比分析验证了模型的正确性和有效性．     

共面闭合断续节理岩体直剪强度特性研究

介绍了节理面和岩桥各自的抗剪强度机制,引入法向变形协调条件,基于Mohr-Coulomb理论,推导了共面闭合断续节理岩体的直剪强度公式。模型试验发现,剪切破坏面以拉剪复合破坏为主,同时岩块中伴随大量的拉张微裂隙。试样的强度和变形具有明显的阶段性,全应力应变曲线主要经历了线弹性增长、节理面错动、次生裂纹起裂稳态扩展、节理面贯通破坏和残余强度5个阶段。对比发现,理论计算结果与试验值吻合较好。     

Stress-strain state and durability of mechanically inhomogeneous welds under low-cycle loading

Relations are proposed for the determination of the stress-strain state, strength, and life of butt welds with mild and hard interlayers under cyclic elastoplastic tension-compression. The accumulation of cyclic and quasistatic damages is determined with allowance for the redistribution of the cyclic elastoplastic strains and hardness of the stress state due to changes in the cyclic properties of separate regions of welds. The theoretical distribution of cyclic strains and the durability of welds under cyclic elastoplastic loading are supported by experimental data __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 2, pp. 29–38, February 2008.     

Deformation and long-term damage of particulate composites with stress-rupture microstrength described by a fractional-power function

The theory of long-term damage of homogeneous materials is generalized to particulate composite materials. The damage of the composite components is modeled by randomly dispersed micropores. The damage criterion for a microvolume is characterized by its stress-rupture strength. It is determined by the dependence of the time to brittle failure on the difference between the equivalent stress and its limit, which is the tensile strength, according to the Huber-Mises criterion, and assumed to be a random function of coordinates. An equation of damage (porosity) balance in the composite components at an arbitrary time is formulated. Algorithms of calculating the time dependence of microdamage and macrostresses or macrostrains are developed and corresponding curves are plotted in the case of limited microdurability Translated from Prikladnaya Mekhanika, Vol. 44, No. 10, pp. 3–12, October 2008.     

????????????????????????

超轻多孔金属材料因其具有优良的结构效率和广泛的多功能应用前景,近年来已成为国内外 众多研究所关注的热点. 本文就学术界关注的多孔金属材料的宏观等效模型建模与材料微 结构的多功能优化设计进行了综述.     

镁单晶变形行为的原子模拟

应用分子动力学方法模拟镁单晶在单向拉伸作用下的力学性能和微观结构演化过程.不同应变和不同温度下的模拟结果中都观测到{1011},{1012}型李晶.表明这两种孪晶是镁单晶拉伸变形的主要机制.其中{1012}型挛晶的产生伴随新晶粒生成,并且随应变增加孪晶的数量增加.此外,随着温度的增加,原子热激活效应显著.镁单晶的最大弹性形变减小,最大应力值亦变小.     

104s-1应变率下SHPB系统实验相关问题探讨

利用小直径(3.17mm)的SHPB系统初步获得两种较高强度材料(一种特种钢和一种WMo合金)应变率达到104s-1以上的动态压缩应力 应变曲线。通过对这次实验过程及结果的观察和分析,对高应变率实验存在的几个问题进行了探讨。