Composting and biodegradation of thermally processed feather keratin polymer

Proteins obtained from agricultural sources represent a unique feedstock from which to prepare thermally processable polymers. In this study, thermally processed feather keratin films were composted with three-month-old compost inoculum in self-heating laboratory composters for 30 days and temperature and carbon dioxide development monitored. About 24% of the available carbon in the feather keratin polymer (FKP) was metabolized in this time and this may not be high enough for some applications. Degradation of the feather keratin polymers was observed within 10 days with concurrent molecular weight reduction measured using FT-IR. Visual inspection of the polymers also showed destruction of the films. A change in crystallinity was observed in DSC analysis and some degradation processes could be inferred from this as well.     

Optimization of a portable microanalytical system to reduce electrode fouling from proteins associated with biomonitoring of lead (Pb) in saliva

There is a need to develop reliable portable analytical systems for on-site and real-time biomonitoring of lead (Pb) from both occupational and environmental exposures. Saliva is an appealing matrix since it is easily obtainable, and therefore a potential substitute for blood due to existing reasonably good correlation between Pb levels in blood and saliva. The microanalytical system is based on flow-injection/stripping voltammetry with a wall-jet (flow-onto) microelectrochemical cell. Samples that contain as little as 1% saliva can cause electrode fouling, resulting in significantly reduced responsiveness and irreproducible quantitations. In addition, incomplete Pb release from salivary protein can also yield a lower Pb response than expected. This paper evaluates the extent of in vitro Pb-protein binding and the optimal pretreatment for releasing Pb from the saliva samples. Even in 50% by volume of rat saliva, the electrode fouling was not observed, due to the appropriate sample pretreatment and the constant flow of the sample and acidic carrier that prevented passivation by the protein. The system offered a linear response over a low Pb range of 1-10 ppb, low detection limit of 1 ppb, excellent reproducibility, and reliability. It also yielded the same Pb concentrations in unknown samples as did the ICP-MS. These encouraging results suggest that the microanalytical system represents an important analytical advancement for real-time non-invasive biomonitoring of Pb.     

Determination of the thiol redox state of organisms: new oxidative stress indicators

This study describes a new methodology by which the concentrations of non-protein (NP) thiols glutathione (GSH), cysteine (CSH), N-acetylcysteine (AcCSH), and protein (P) thiols (PSH), as well as the contribution of these components to symmetric and mixed disulfides (NPSSR, NPSSC, NPSSCAc, PSSR, PSSC, PSSCAc, PSSP) can reliably be measured. The methodology consists of a strict sequence of methods which are applied to every sample. Free thiols at any given state of the procedure are measured by Ellmans assay, the CSH fraction is measured by its unique response in the ninhydrin assay, AcCSH is selectively measured with ninhydrin after enzymatic deacylation, proteins are separated from non-protein thiols/disulfides by precipitation with trichloroacetic or perchloric acid, disulfides are reduced into free thiols with borohydride, mixed disulfides between a protein and a non-protein component are measured by extracting the non-protein thiol from the protein pellet after borohydride treatment, and protein thiols/disulfides are measured after resolubilization of the protein pellet.When this method was applied to animal and fungal tissue, new molecular indicators of the thiol redox state of living cells were identified. The findings of the present study clearly show that the new parameters are very sensitive indicators of redox state, while at the same time the traditional parameters GSH and GSSG often remain constant even upon dramatic changes in the overall redox state of biological tissue. Therefore, unbiased assessment of the redox state also requires explicit measurement of its most sensitive thiol indicators.Electronic Supplementary Material Supplementary material is available in the online version of this article at . A link in the frame on the left on that page takes you directly to the supplementary material.     

聚(St-DVB)型整体柱的制备及其对蛋白质的色谱分离性能

苯乙烯(St)为单体,二乙烯基苯(DVB)为交联剂,在致孔剂甲苯和十二醇存在下,直接以Ф4.6×50mm色谱柱管为模具,同时在整个反应过程中通过氩气对反应混合物施加一个恒定的压力,通过原位聚合制备了聚(苯乙烯-二乙烯基苯)(PSD)型整体柱。在聚合过程中对反应混合物施加一定的压力,使制备的整体柱表面光滑无凹痕现象,并且使柱子的两头平整不凹陷,有利于提高柱效。本文对整体柱的孔结构及其对蛋白质的分离性能进行了研究。实验结果表明,整体柱内部含有大量类似渠道的大孔,孔径为2μm~3μm,在流速为5ml/min时,背压为7MPa。而且流速对色谱分离效率的影响小,流速从1ml/min增大到3ml/min时,牛血清白蛋白和溶菌酶这两种蛋白质的总分离效能指标K1的值基本保持不变,保持在3.35左右,说明可以通过提高流速实现蛋白质的快速分离。     

Dynamic imaging of single DNA-protein interactions using atomic force microscopy

Atomic force microscopy (AFM) imaging of static DNA-protein complexes, in air and in liquid, can be used to directly obtain quantitative and qualitative information on the structure of different complexes. For example, DNA length, the location of preferential binding sites for proteins and bending of DNA as a result of the complexation can all be measured. Recording consecutive AFM images of DNA and protein molecules under conditions that they are still able to move and interact, or dynamic AFM imaging, however, can reveal information on the dynamic aspects of the interactions between these molecules. Here, an overview is given of the technical challenges that need to be considered for successful dynamic AFM imaging studies of individual DNA-protein interactions. Necessary technical improvements to the AFM set-up and the development of new sample preparation methods are described in this paper.     

生物大分子印迹聚合物研究进展及其应用

介绍了生物大分子印迹技术及其印迹聚合物的研究进展,其中包括对蛋白质、核酸、微生物细胞进行分子印迹所采用的印迹方法、机理以及存在的问题,最后简要探讨了生物大分子印迹聚合物在医学研究中的应用前景。     

蛋白质荧光标记中协同效应的高效液相色谱

以牛血清白蛋白和胰岛素为研究对象, 经1,5-I-AEDANS衍生后, 采用高效液相色谱(HPLC)进行分离分析, 发现两者的衍生存在明显的协同作用.     

211At标记蛋白质或多肽的方法研究

α核素211At具有良好的辐射生物学性质,以对肿瘤细胞具有高亲和性的单克隆抗体或多肽类配体为载体则是实现211At肿瘤靶向治疗的最理想方式之一。本文介绍了211At标记蛋白质或多肽的方法的现状与进展,对存在的一些问题及今后的发展方向进行了讨论。     

What to Learn from a Comparative Genomic Sequence Analysis of <Emphasis Type="Italic">L</Emphasis>-Carnitine Dehydrogenase

Summary. In contrast to eukaryotic cells certain eubacterial strains have acquired the ability to utilize L-carnitine (R-(–)-3-hydroxy-4-(trimethylamino)butyrate) as sole source of energy, carbon and nitrogen. The first step of the L-carnitine degradation to glycine betaine is catalysed by L-carnitine dehydrogenase (L-CDH, EC 1.1.1.108) and results in the formation of the dehydrocarnitine. During the oxidation of L-carnitine a simultaneous conversion of the cofactor NAD⁺ to NADH takes place. This catabolic reaction has always been of keen interest, because it can be exploited for spectroscopic L-carnitine determination in biological fluids – a quantification method, which is developed in our lab – as well as L-carnitine production.Based on a cloned L-CDH sequence an expedition through the currently available prokaryotic genomic sequence space began to mine relevant information about bacterial L-carnitine metabolism hidden in the enormous amount of data stored in public sequence databases. Thus by means of homology-based and context-based protein function prediction is revealed that L-CDH exists in certain eubacterial genomes either as a protein of approximately 35 kDa or as a homologous fusion protein of approximately 54 kDa with an additional putative domain, which is predicted to possess a thioesterase activity. These two variants of the enzyme are found on one hand in the genome sequence of bacterial species, which were previously reported to decompose L-carnitine, and on the other hand in gram-positive bacteria, which were not known to express L-CDH. Furthermore we could not only discover that L-CDH is located in a conserved genetic entity, which genes are very likely involved in this L-carnitine catabolic pathway, but also pinpoint the exact genomic sequence position of several other enzymes, which play an essential role in the bacterial metabolism of L-carnitine precursors.     

Short range photoinduced electron transfer in proteins: QM-MM simulations of tryptophan and flavin fluorescence quenching in proteins

Hybrid quantum mechanical-molecular mechanics (dynamics) were performed on flavin reductase (Fre) and flavodoxin reductase (Fdr), both from Escherichia coli. Each was complexed with riboflavin (Rbf) or flavin mononucleotide (FMN). During 50 ps trajectories, the relative energies of the fluorescing state (S₁) of the isoalloxazine ring and the lowest charge transfer state (CT) were assessed to aid prediction of fluorescence lifetimes that are shortened due to quenching by electron transfer from tyrosine. The simulations for the four cases display a wide range in CT–S₁ energy gap caused by the presence of phosphate, other charged and polar residues, water, and by intermolecular separation between donor and acceptor. This suggests that the Gibbs energy change (ΔG₀) and reorganization energy (λ) for the electron transfer may differ in different flavoproteins.