Photoluminescence properties of SHI induced F2 and F3 color centers in nano-granular LiF thin films

Photoluminescence (PL) properties of swift heavy ions-induced F₂ and F₃⁺ color centers in nano-granular lithium fluoride (LiF) thin film were studied. LiF films were deposited on glass and silica substrates and irradiated with various ion species (Ag, Ni and Au) at different irradiation temperatures. The role of ion species, their fluence and the irradiation temperature on the PL intensity of color centers induced in LiF thin films is discussed.     

高压下LiF和NaF的结构稳定性及其电子和光学性质的第一性原理研究

基于密度泛函理论，采用全势线性缀加平面波加局域轨道方法，计算模拟了LiF高压下的相变行为，预测其在450GPa附近发生由NaCl结构(B1)到CsCl结构(B2)的结构相变.同时还计算了高压下LiF不同相的电学特性，LiF的复介电函数以及介电常数随压强变化关系.通过比较能带结构的变化行为，得出LiF在53GPa附近还存在等结构相变，即由直接带隙结构变为间接带隙结构.将LiF的计算结果与另外一个同构化合物NaF进行了比较讨论. 关键词： LiF 压致相变 从头计算     

New solid-state synthesis routine and mechanism for LiFePO4 using LiF as lithium precursor

Li₂CO₃ and LiOH·H₂O are widely used as Li-precursors to prepare LiFePO₄ in solid-phase reactions. However, impurities are often found in the final product unless the sintering temperature is increased to 800 °C. Here, we report that lithium fluoride (LiF) can also be used as Li-precursor for solid-phase synthesis of LiFePO₄ and very pure olivine phase was obtained even with sintering at a relatively low temperature (600 °C). Consequently, the product has smaller particle size (about 500 nm), which is beneficial for Li-extraction/insertion in view of kinetics. As for cathode material for Li-ion batteries, LiFePO₄ obtained from LiF shows high Li-storage capacity of 151 mAh g⁻¹ at small current density of 10 mA g⁻¹ (1/15 C) and maintains capacity of 54.8 mAh g⁻¹ at 1500 mA g⁻¹ (10 C). The solid-state reaction mechanisms using LiF and Li₂CO₃ precursors are compared based on XRD and TG-DSC.     

The fundamental features and characteristics of discharge and plasma ion sources

An analysis of some of the fundamental and special physical processes occurring in discharge and plasma ion sources is presented.

The main purpose of the lecture is to present to the users of ion sources some key elements of information, of which not all may be generally recognised and which hopefully will be of value for a better understanding of the operational problems related to the complex behaviour of discharge and plasma ion sources.     

绝缘层LiF/Al电极对提高P-PPV发光器件发光性能的研究

为了提高聚合物电致发光器件中Ba（Ca）／Al阴极的稳定性,在该阴极与聚合物发光材料poly（2-（4-ethylexyl）phenyl-1,4-phenylene vinylene）（P-PPV）层之间插入一层7nm的LiF绝缘层,发光器件的发光性能在多项参数（发光器件的电压．电流特性、发光强度及外量子效率,以及电流效率等发光性能指标）上能够与工作性能优良但稳定性较差的Ba（Ca）／Al电极结构PLEDs器件的发光特性具有可比性。这对于研制高效率、高稳定的聚合物电致发光器件并最终将其用于商业目的,具有重大现实意义。     

Radiation-induced transmission loss in optical materials at infrared wavelengths

Information concerning the effect of irradiation on the optical properties of materials in the infrared, sub-mm-and mm-wavelength regions is of increasing importance in fusion plasma diagnostics. The radiation induced transmission loss of a number of materials has therefore been investigated at wavelengths in the ranges 200 nm to 40 μm and 0.23 to 2.0 mm. The samples were irradiated with doses of up to 10¹⁰ rad in a nuclear reactor. While germanium shows considerable transmission loss at doses as low as 10⁶ rad, and the transmission of TPX decreases at 10⁹ rad, other materials, e.g. fused quartz and possibly ZnSe, exhibit sufficient radiation hardness for use in fusion plasma diagnostics.     

LiF插层对有机发光二极管磁场效应的调控

制备了有LiF插层的有机发光二极管,以八羟基喹啉铝（Alq₃）作为电子传输层,N, N′-二苯基-N, N′-二(1-萘基)-1,1′-联苯-4,4′-二胺（NPB）作为空穴传输层.通过改变Alq₃与NPB间LiF插层的厚度,研究了不同温度下器件的光电特性及电致发光的磁场效应.测量结果表明:LiF插层可以影响器件内部载流子的输运和激发态的形成.较厚的插层阻碍了空穴的传输,使器件的电流效率变低.但实验中发现, 关键词： LiF插层结构 磁场效应 三重态激子     

LiF修饰阴极的双层有机电致发光器件的延时效应

基于载流子的注入、传输和复合过程,建立了双层有机发光器件的电致发光延时理论模型;讨论了电致发光延时随电压、注入势垒、内界面势垒、阳极区厚度及LiF缓冲层(BL)厚度的变化关系。结果表明:(1)低电压下,EL延时由复合过程主导,而高电压下,输运过程起着更重要的作用;(2)当δe/δh2时,M/O界面属于欧姆接触,电流是空间电荷限制的,注入势垒的变化对复合时间trec影响较大,当δe/δh2时,M/O界面成为接触限制,注入势垒的变化对trec几乎没有影响;(3)当内界面势垒超过0.3eV,H′h对trec的影响明显变弱,复合延迟时间基本上由电压和其它因素控制;(4)当电压较小时,随Lh/L的增大,trec增大;当电压超过某一值后,trec几乎不随Lh/L的变化而变化;(5)对于LiF/Ag阴极,在不同的偏压下,LiF的厚度在3.1nm左右时的复合时间最短,对应的EL延迟时间也最短,这与实验中从电致发光效率的角度得出的LiF最佳厚度一致。     

微量Mg/F表面梯度渗透改善高电压LiCoO2界面脆弱

采用高温固相法在1 050℃下烧结,制备了LiCoO₂低浓度梯度改性样品,分别为LiF掺杂包覆(LCOLF、LCO@LF)和MgF₂掺杂包覆(LCOMF、LCO@MF)。通过光电子能谱、透射电子显微镜和电化学技术等表征方法,对比分析材料形貌及电化学性能。结果表明,体相掺杂复合电极中,LCOLF热重测试显示出最优热稳定性,LCOMF晶体中(003)和(104)晶面间距收缩;45℃下1C倍率循环70圈后,LCOLF和LCOMF比容量分别为141.45和166.98 mAh·g^-1,循环性能优于LiCoO₂。表面包覆复合电极中,LCO@LF和LCO@MF晶粒表面光洁且晶格氧键价都向更高结合能方向增强;LCO@MF构建了坚实且紧密的包覆层,循环70圈后,放电比容量和容量保持率分别为183 mAh·g-1和91.26%(LCO@LF分别为154.38 mAh·g^-1和77.54%),循环性能显著优于体相掺杂。     

惰气熔融-红外光谱法测定7LiF中的氧含量

7LiF是制备熔盐堆冷却剂7LiF-BeF2熔盐的基础原材料,其杂质含量的多少与熔盐纯度及应用性能直接相关。采用惰气熔融-红外吸收法,建立了熔盐堆用7LiF中杂质氧含量测定的新方法。考察了不同助熔剂和加热功率等条件对7LiF中氧含量的影响,找到了较好的 7LiF中氧含量测定方法。在分析功率为2200W,用银舟做助熔剂,称样量为0.1 g的条件下对7LiF试样进行了测定,氧的相对标准偏差为2.9%;加标回收率为103-110%。结果表明,本测定方法易操作,速度快,能满足7LiF生产过程中的质量控制要求,为第四代先进核能反应堆用7LiF规模化制备提供了有力的技术支持。