Cyclohexane‐1,3‐dione as a derivatizing agent for the analysis of aldehydes by micelar electrokinetic chromatography with diode array detection

Aldehydes are important compounds in a large number of samples, especially food and beverages. In this work, for the first time, cyclohexane‐1,3‐dione (CHD) was used as a derivatizing reagent aiming aldehyde (formaldehyde, acetaldehyde, propionaldehyde, and valeraldehyde) analysis by MEKC‐DAD. The optimized separation of the derivates was performed using a voltage program (+20 kV, 0–15 min.; +23 kV, 15–17 min.) at a temperature of 26°C, and using as the running buffer a mixture containing 100 mmol/L of sodium dodecyl sulfate and 29 mmol/L of sodium tetraborate at pH 9.2, with maximum absorbance at 260 nm. CHD was compared with two other derivatizing agents: 3‐methyl‐2‐benzothiazolinone hydrazone and phenylhydrazine‐4‐sulfonic acid. The CHD‐aldehyde derivatives were also characterized by LC‐MS. The calibration curves for all aldehydes had r² above 0.999 and LODs ranged from 0.01 to 0.7 mg/L. The optimized methodology was applied in sugar cane brandy (cachaça) samples successfully. CHD showed to be an alternative derivatization reagent due to its stability, aqueous solubility, high selectivity and sensitivity, reduced impurities, and simple preparation steps.     

Synthesis and Structures of Arene Ruthenium (II)–NHC Complexes: Efficient Catalytic α‐alkylation of ketones via Hydrogen Auto Transfer Reaction

A panel of six new arene Ru (II)‐NHC complexes 2a‐f , (NHC = 1,3‐diethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1a , 1,3‐dicyclohexylmethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1b and 1,3‐dibenzyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1c ) were synthesized from the transmetallation reaction of Ag‐NHC with [(η⁶‐arene)RuCl₂]₂ and characterized. The ruthenium (II)‐NHC complexes 2a‐f were developed as effective catalysts for α‐alkylation of ketones and synthesis of bioactive quinoline using primary/amino alcohols as coupling partners respectively. The reactions were performed with 0.5 mol% catalyst load in 8 h under aerobic condition and the maximum yield was up to 96%. Besides, the different alkyl wingtips on NHC and arene moieties were studied to differentiate the catalytic robustness of the complexes in the transformations.     

Tricin isolated from Allium atroviolaceum potentiated the effect of docetaxel on PC3 cell proliferation: role of miR-21

For more effectiveness and overcoming the drug resistance Chemotherapy agents, the combination treatment is raised. Flavonoids with different anti-cancer effects are an appropriate choice as lead compounds. Over expressed MiR-21 in prostate cancer is associated with metastasis and drug resistance to chemotherapy with Docetaxel. In this study, the anticancer effect of 4′, 5, 7-Trihydroxy-3′, 5′-dimethoxyflavone (Tricin) was investigated with Docetaxel on PC3 cell line. Tricin was initially isolated from the Allium atroviolaceum by column chromatography and recrystallization method. The chemical structure of isolate was elucidated by spectroscopic techniques. IC₅₀ of Tricin and Docetaxel were assessed 117.5 ± 4.4 μM and 0.1 ± 0.02 nM by MTT assay, respectively. Analysis of results indicates the synergistic effect of combination therapy on decreased proliferation. MiR-21 in treated cells with Tricin significantly decreased compared to control cells. So, Tricin can be effective in the reduction of metastasis and drug resistance of Docetaxel.     

Fe3O4 – Glutathione stabilized Ag nanoparticles: A new magnetically separable robust and facile catalyst for aqueous phase reduction of nitroarenes

The heterostructured Ag nanoparticles decorated Fe₃O₄ Glutathione (Fe₃O₄‐Glu‐Ag) nanoparticles (NPs) were synthesized by sonicating glutathione (Glu) with magnetite and further surface immobilization of silver NPs on it. The ensuing magnetic nano catalyst is well characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), powder X‐ray diffraction (PXRD), thermogravimetric analysis (TGA). The prepared Fe₃O₄‐Glu‐Ag nanoparticles have proved to be an efficient and recyclable nanocatalyst with low catalyst loading for the reduction of nitroarenes and heteronitroarenes to respective amines in the presence of NaBH₄ using water as a green solvent which could be easily separated at the end of a reaction using an external magnet and can be recycled up to 5 runs without any significant loss in catalytic activity. Gram scale study for the reduction of 4‐NP has also being carried out successfully and it has been observed that this method can serve as an efficient protocol for reduction of nitroarenes on industrial level.     

Chromium complexes based on thiophene–imine ligands for ethylene oligomerization

A new set of Cr(III) complexes, {L}CrCl₃(THF), based on thiophene–imine ( 2a , L = PhOC₆H₄(N═CH)‐2‐SC₄H₃; 2b , L = PhOC₂H₄(N═CH)‐2‐SC₄H₃; 2c , L = Ph(NH)C₂H₄(N═CH)‐2‐SC₄H₃; 2d , L = PhOC₆H₄(N═CH)‐2‐SC₄H₂‐5‐Ph; 2e , L = Ph(NH)C₂H₄(N═CH)‐2‐SC₄H₂‐5‐Ph) have been prepared and characterized using elemental analysis and infrared spectroscopy. Upon activation with methylaluminoxane, all the chromium complexes generated active systems affording a nonselective distribution of α‐olefins with turnover frequencies in the range 9500–93 500 (mol ethylene) (mol Cr)^?1 h^?1, and producing mostly oligomers (95.0–99.3 wt% of total products). Small amounts of polymer were produced in these oligomerization reactions (0.8–8.2 wt%). The catalytic activities were quite sensitive to the ligand environment. Moreover, the effects of oligomerization parameters (temperature, [Al]/[Cr] molar ratio, time) on the activity and on the product distribution were examined.     

Synthesis,crystal structure and magnetic properties of a new tri‐nuclear iron (II,III) complex,a precursor for the preparation of superparamagnetic Fe3O4 nanoparticles applicable in the removal of Cd2+

This study reports the structural and spectroscopic characterization of a novel metal organic compound formulated as [Fe (bpy)₃] [Fe (dipic)₂]₂.7H₂O ( 1 ) (dipic = pyridine‐2,6‐dicarboxylate and bpy = 2,2^′‐bipyridine). 1 was investigated by elemental analysis, FT‐IR spectroscopy, powder X‐ray diffraction and single crystal X‐ray diffraction (SC‐XRD), which revealed a triclinic structure of expected composition. Thermal degradation of 1 was also investigated. Complex 1 was used as a precursor to prepare superparamagnetic nanoparticles of Fe₃O₄ by thermal analysis. The obtained Fe₃O₄ was characterized by Fourier transformed infrared spectroscopy (FT‐IR), powder X‐ray diffraction (XRD) and scanning electron microscopy (SEM). Fe₃O₄ nanoparticles were used as a nano‐adsorbent to remove Cd²⁺ from water at room temperature. The results showed that this nano‐adsorbent is effective in removing Cd²⁺ from contaminated water sources, and that the maximal effectivity of adsorption occurs at pH = 6. Magnetic measurements of complex 1 and Fe₃O₄ nanoparticles at room temperature revealed paramagnetic and superparamagnetic behavior, respectively.     

Advanced Li-Ion Batteries with High Rate,Stability, and Mass Loading Based on Graphene Ribbon Hybrid Networks

To optimize the cycle life and rate performance of lithium-ion batteries (LIBs), ultra-fine Fe₂O₃ nanowires with a diameter of approximately 2 nm uniformly anchored on a cross-linked graphene ribbon network are fabricated. The unique three-dimensional structure can effectively improve the electrical conductivity and facilitate ion diffusion, especially cross-plane diffusion. Moreover, Fe₂O₃ nanowires on graphene ribbons (Fe₂O₃/GR) are easily accessible for lithium ions compared with the traditional graphene sheets (Fe₂O₃/GS). In addition, the well-developed elastic network can not only undergo the drastic volume expansion during repetitive cycling, but also protect the bulk electrode from further pulverization. As a result, the Fe₂O₃/GR hybrid exhibits high rate and long cycle life Li storage performance (632 mAh g⁻¹ at 5 A g⁻¹, and 471 mAh g⁻¹ capacity maintained even after 3000 cycles). Especially at high mass loading (≈4 mg cm⁻²), the Fe₂O₃/GR can still deliver higher reversible capacity (223 mAh g⁻¹ even at 2 A g⁻¹) compared with the Fe₂O₃/GS (37 mAh g⁻¹) for LIBs.     

Effects of substituents on bridging ligands on the single‐molecule magnet properties of Zn2Dy2 cluster complexes

Two new Zn₂Dy₂ complexes were constructed from Zn (II) salen‐type Schiff base complex fragment and 2,6‐pyridinedimethanol (H₂pdm) or its Br‐substituted analogue (4‐bromopyridine‐2,6‐diyl)dimethanol (H₂Brpdm); their molecular formulas are [Zn₂Dy₂(L)₂(pdm)₂(MeOH)₂](ClO₄)₂ [ 1 , H₂L = N, N′‐ bis(3‐methoxysalicylidene)‐1,3‐diaminopropane] and [Zn₂Dy₂(L)₂(Brpdm)₂(MeOH)₂](ClO₄)₂ [ 2 ], the Dy (III) ions of which have a NO₇ triangular dodecahedral coordination sphere. The two complexes show not only ferromagnetic interaction but also field‐induced single‐molecule magnet (SMM) behavior, which are rare Dy (III)‐containing cluster complexes with the NO₇ triangular dodecahedral coordination sphere that can show good magnetic relaxation. The energy barrier value of complex 2 is higher than those of complex 1 and the Dy (III) complexes with the DyNO₇ triangular dodecahedral coordination configuration reported in the literature.     

Effect of biaxial strain and hydrostatic pressure on the magnetic properties of bilayer CrI3

Two-dimensional van der Waals magnetic materials are intriguing for applications in the future spintronics devices, so it is crucial to explore strategy to control the magnetic properties. Here, we carried out first-principles calculations and Monte Carlo simulations to investigate the effect of biaxial strain and hydrostatic pressure on the magnetic properties of the bilayer CrI₃. We found that the magnetic anisotropy, intralayer and interlayer exchange interactions, and Curie temperature can be tuned by biaxial strain and hydrostatic pressure. Large compressive biaxial strain may induce a ferromagneticto-antiferromagnetic transition of both CrI₃ layers. The hydrostatic pressure could enhance the intralayer exchange interaction significantly and hence largely boost the Curie temperature. The effect of the biaxial strain and hydrostatic pressure revealed in the bilayer CrI₃ may be generalized to other two-dimensional magnetic materials.     

Synthesis,characterization and α‐amylase and α‐glucosidase inhibition studies of novel vanadyl chalcone complexes

A series of chalcone ligands and their corresponding vanadyl complexes of composition [VO (L^I–IV)₂(H₂O)₂]SO₄ (where L^I = 1,3‐Diphenylprop‐2‐en‐1‐one, L^II = 3‐(2‐Hydroxy‐phenyl)‐1‐phenyl‐propenone, L^III = 3‐(3‐Nitro‐phenyl)‐1‐phenyl‐propenone, L^IV = 3‐(4‐Methoxy‐phenyl)‐1‐phenyl‐propenone) have been synthesized and characterized using various spectroscopic (Fourier‐transform infrared, electrospray ionization mass, nuclear magnetic resonance, electron paramagnetic resonance, thermogravimetric analysis, vibrating sample magnetometer) and physico‐analytic techniques. Antidiabetic activities of synthesized complexes along with chalcones were evaluated by performing in vitro and in silico α‐amylase and α‐glucosidase inhibition studies. The obtained results displayed moderate to significant inhibition activity against both the enzymes by vanadyl chalcone complexes. The most potent complexes were further investigated for the enzyme kinetic studies and displayed the mixed inhibition for both the enzymes. Further, antioxidant activity of vanadyl chalcone complexes was evaluated for their efficiency to release oxidative stress using 2,2‐diphenyl‐1‐picryl‐hydrazyl‐hydrate assay, and two complexes (Complexes 2 and 4 ) have demonstrated remarkable antioxidant activity. All the complexes were found to possess promising antidiabetic and antioxidant potential.