氨基化树枝状介孔二氧化硅固定葡萄糖氧化酶用于检测葡萄糖

以三乙胺为碱源合成了树枝状介孔二氧化硅纳米粒子（DMSNs），并用3-氨基丙基三乙氧基硅烷（APTES）进行氨基修饰合成了氨基化树枝状介孔二氧化硅纳米粒子（DMSNs-NH₂），将其用于葡萄糖氧化酶（GOD）的固定化研究.采用扫描电子显微镜、透射电子显微镜、红外光谱仪、X射线衍射仪、氮气吸附仪及热重分析仪对固定化GOD（DMSNs-NH₂-GOD）进行了表征，测定了其活性及蛋白载量.结果表明，固定化GOD的直径约为200 nm，形状均一，呈分散的球形微粒；在最佳固定条件下，蛋白载量达225 mg/g，酶活性达215 U/mg；固定化GOD检测葡萄糖的最低检测限为0.0014 mg/mL.利用固定化GOD检测了血清和饮料中的葡萄糖，重复使用36次以上其相对酶活性仍剩余80%.该方法操作方便、准确度高，提高了酶的pH稳定性、热稳定性及重复使用性，降低了检测成本.     

固定化β-葡萄糖醛酸酶反应器的制备及其在4-甲基亚硝胺基-1-(3-吡啶)-1-丁醇的O-糖苷化合物分析中的应用

采用溶胶-凝胶法,以丙烯酰胺作为单体,制备了基于有机-硅胶杂化整体柱的β-葡萄糖醛酸酶反应器。优化了硅酸甲酯和γ-(甲基丙烯酰氧)丙基三甲氧基硅的物质的量的比、丙烯酰胺和聚乙二醇的用量,以及水浴温度等制备条件,获得了孔隙均匀、通透性良好、机械强度高的有机-硅胶杂化整体柱。采用光学显微镜和扫描电镜表征杂化整体柱。进一步将β-葡萄糖醛酸酶共价键合在整体柱上,以4-甲基亚硝胺基-1-(3-吡啶)-1-丁醇(NNAL)的O-糖苷化合物(NNAL-O-Gluc)为底物研究酶反应器的水解效果,实验结果证明酶反应器在室温条件下的水解效率大大提高,实现了NNAL-O-Gluc高效水解与分析,解决了目前NNAL-O-Gluc分析中前处理水解效率低的问题。     

高性能多级花状Co3O4基无酶葡萄糖电化学传感器

以硝酸钴、碳酸钠、尿素为原料,泡沫镍为基体,采用水热和煅烧相结合的二步法制备了一种多级花状Co_3O_4/Ni异质结构的无酶葡萄糖传感器。通过X射线衍射与扫描电镜对Co_3O_4/Ni电极的成分及形貌进行了表征,并采用循环伏安法在1mol/L KOH溶液中测试了Co_3O_4/Ni异质结构葡萄糖传感器电极的电化学性能。结果表明,通过二步法在泡沫镍表面制备的Co_3O_4呈现多级花状纳米纤维结构。将制备的Co_3O_4/Ni异质结构作为电极构建的无酶葡萄糖传感器表现出响应时间快(低于5s)、检测灵敏度高(7.4m A·(mmol/L)~(-1)·cm~(-2))、检出限低(1.17μmol/L,S/N=3)和线性检测范围宽(0~5 mmol/L)的特点。进一步的抗干扰性检测表明所制备的传感器在+0.44V vs.SCE对葡萄糖表现出良好的选择性。本文所制备的多级花状Co_3O_4基电极在无酶葡萄糖传感器的发展中有着很大的应用潜力。     

Lewis酸催化纤维素制乳酸机理研究

Because fossil fuels are continuously depleted, valorization of biomass into valuable liquid products and chemicals is of great significance yet it remains challenging. Among many biomass-derived products, lactic acid is one of the most important renewable monomers for preparing the degradable polymer polylactic acid. The use of raw biomass to produce lactic acid through catalytic conversion is an attractive approach. In this work, the catalytic reaction performance and mechanism of different Lewis acids (Y³⁺, Sc³⁺, and Al³⁺) for the production of lactic acid from cellulose were investigated in detail by isotopic nuclear magnetic resonance (NMR) and mass spectrometry. The production of lactic acid from cellulose includes tandem and competing reactions. The order of catalytic activity for the one-pot conversion of cellulose into lactic acid is as follows: Y³⁺ > Al³⁺ > Sc³⁺. The main tandem reactions involve the hydrolysis of cellulose into glucose, the isomerization of glucose into fructose (the order of catalytic activity, the same below: Y³⁺ > Al³⁺, Y³⁺ > Sc³⁺), the cleavage of fructose via a retro-aldol reaction to glyceraldehyde (GLY) and 1, 3-dihydroxyacetone (DHA) (Sc³⁺ > Y³⁺ > Al³⁺), and the conversion of DHA or GLY to the final product lactic acid (Al³⁺ > Y³⁺ > Sc³⁺). It was found that the process of glucose isomerization to fructose was the key step to the final selectivity of the tandem reaction of cellulose conversion to lactic acid, and it was clarified that the production of lactic acid from DHA underwent a keto-enol (K-E) tautomerization process rather than a classical 1, 2-shift process. First, DHA was transformed into GLY via the isomerization process, then the adjacent hydroxyl group of GLY was removed in the form of water to produce an α, β-unsaturated species. After that, the α, β-unsaturated species underwent K-E tautomerization to generate unsaturated aldehyde-ketone intermediates. Meanwhile, a molecule of water was added to aldehyde-ketone intermediates to obtain a diol product, the hydrogen atom at the methine position was transferred and the lactic acid was finally obtained through the K-E tautomerization process. The in-depth understanding of the reaction mechanism presented in this work will help to design more selective catalysts for cellulose conversion into value-added oxygen-containing small molecule chemicals.      

LiFePO4 doped with magnesium prepared by hydrothermal reaction in glucose solution

Lithium iron phosphate （LiFePO4） doped with magnesium was hydrothermally synthesized from commercial LiOH, FeSO4, H3PO4 and MgSO4 with glucose as carbon precursor in aqueous solution. The samples were characterized by X-ray powder diffraction, scanning electron microscopy and constant charge-discharge cycling. The results show that the synthesized powders have been in situ coated with carbon precursor produced from caramel reaction of glucose. At ambient temperature （28±2℃）, the electrochemical performances of LiFePO4 prepared exhibit the high discharge capacity of 135 mAh g^-1 at 5C and good capacity retention of 98% over 90 cycles. The excellent electrochemical performances should be correlated with the intimate contact between carbon and LiFePO4 primary and secondary particles, resulting from the in situ formation of carbon precursor/carbon, leading to the increase in conductivity of LiFePO4.     

壳聚糖-Cu^2＋复合物膜固定葡萄糖氧化酶用于葡萄糖传感

利用壳聚糖(CS)对Cu2 的配位吸附作用,制得壳聚糖-Cu2 复合膜修饰电极,进一步通过Cu2 与蛋白质的配位作用,再将葡萄糖氧化酶(GOD)固定在金电极上制得GOD-Cu2 -CS/Au电极.该酶电极检测葡萄糖的线性范围为0.03～2.5 mmol·L-1,线性相关系数为0.997,检出限(S/N=3)为1 μmol·L-1.以电化学石英晶体微天平(EQCM)技术监测了各修饰过程.     

葡萄糖酸内酯碱性水解的手性拉曼光谱及圆二色光谱研究

以葡萄糖酸内酯的碱性水解为模型反应, 依据葡萄糖酸内酯及其碱性水解产物的特征圆二色谱峰, 利用停留圆二色光谱技术研究了水解动力学. 同时, 结合理论计算, 对葡萄糖酸内酯218 nm处的圆二色谱峰起源给予了初步的解释. 利用手性拉曼光谱, 从分子振动的角度讨论了葡萄糖酸内酯水解前后的手性变化行为. 结果表明, 水解反应引起葡萄糖酸内酯发生开环反应, 主要影响了内酯中羰基基团附近的手性结构, 归属于C1=O伸缩振动模式的手性拉曼谱峰消失. 同时, 水解开环微扰了环中C2, C3, C4和C5周围的环境, 导致手性拉曼谱图中相关谱峰的位移以及峰强度的改变. 水解前后C2, C3, C4和C5各自的立体化学并没有发生根本性改变, 在手性拉曼谱图中表现为谱峰的正负号没有发生根本性改变. 结果表明手性拉曼光谱相比圆二色光谱, 能够提供更为丰富的手性分子的结构信息, 同时, 由于其不受发色团的限制, 表现出更为广阔的应用范围.     

利用动力学模型探讨底物浓度对生物产氢的影响

运用间歇实验方法,以葡萄糖为底物,在浓度为0-300g／L时,研究了底物浓度对混合细菌发酵产氢的影响．结果表明,在35℃和初始pH7．0时,当底物浓度为0～25g／L时,混合细菌发酵葡萄糖的最大累积产氢量和产氢速率都随着底物浓度的增加而增加．当底物浓度为25g／L时,最大累积产氢量和产氢速率都是最高的,分别为426．8mL和15．1mL／h．当底物浓度为2g／L时,比产氢率和底物降解率最大,分别为384．3mL／g葡萄糖和97．6％．修正的Logistic模型能很好地描述本研究中累积产氢量随时间的变化规律．Han-Levenspiel模型能很好地描述本研究中底物浓度对产氢速率的影响．     

血清中葡萄糖含量的测定方法及其研究进展

阐述了血清中葡萄糖的检测在临床诊断研究方面的重要意义,较全面地综述了血清葡萄糖常用的检测方法及研究进展。