铜掺杂钙铝水滑石催化氧化异丙苯制备异丙苯过氧化氢

采用共沉淀法制备了铜掺杂钙铝水滑石Ca₄Cu _x Al-LDHs（x=0,0.1,0.3,0.5,0.8,1.0）,并对其催化异丙苯液相氧化制备异丙苯过氧化氢的活性进行了研究。采用X射线衍射、傅里叶红外光谱、扫描电子显微镜和热分析等手段对Ca₄Cu _x Al-LDHs进行了表征,制备的Ca₄Cu _x Al-LDHs保留了水滑石的片层状结构,铜的掺杂使孔径变小,比表面积增大。当进料比（催化剂/异丙苯）为7.5 mg/mL,反应温度85 ℃,氧气流速为15 mL/min,反应时间7 h,异丙苯的转化率为34.5%,异丙苯过氧化氢的选择性为86.9%,催化剂循环使用5次后,异丙苯的转化率为31.2%,异丙苯过氧化氢的选择性为83.3%。研究为异丙苯过氧化氢开发了新的催化体系。     

Pd nanoparticles on boron doped graphene catalyst for electrochemical detection of hydrogen peroxide prepared by electroless deposition methodEI北大核心CSCD

Taking advantage of large conjugated structure and reductivity of boron-doped graphenethe palladium nanoparticles/boron-doped graphene catalyst was prepared by electroless deposition method using boron-doped graphene as reductant and stabilizer. The average size of palladium nanoparticles highly dispersed on the surface of boron-doped graphene was about 6.5 nm. The electrochemical sensor was prepared by modifying the as-formed catalyst on the surface of glassy carbon electrode. The obtained electrochemical sensor exhibited an excellent electrochemical catalytic activity for H2 O2 . It exhibited high sensitivity with the detection limit as low as 830 nmol/L and good linearity in the range of 2.5-300 μµmol/L for detection of H2 O2 . It could be utilized for the determination of H2 O2 in milk samples. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

CoMn@NC催化5-羟甲基糠醛常压氧化为2, 5-呋喃二甲酸二甲酯

2, 5-呋喃二甲酸二甲酯(DMFDCA)这一生物质衍生的增值化学品是石油基聚合物单体对苯二甲酸(TPA)的理想替代品。本研究采用一步共热解法合成了两种廉价金属修饰的氮掺杂多孔碳催化剂CoMn@NC,并将其用于5-羟甲基糠醛(HMF)在温和条件下的需氧氧化。由Co₃Mn₂@NC-800催化HMF在50 ℃和常压氧气的条件下反应12 h后,得到产率为85%的DMFDCA。多孔催化剂的高比表面积提高了传质效率。Co纳米粒子(NPs)和呈原子级分散的Mn与掺杂在碳中的氮配位形成M―N_x。富含吡啶氮的碳基体中的缺电子金属位点有利于HMF和氧的活化。氧形成的超氧自由基阴离子的存在确保了半缩醛中间体和5-(羟基甲基)-2-糠酸甲酯(HMMF)的羟甲基的脱氢氧化,从而高选择性得到DMFDCA。该催化剂性能稳定,可适用于各种取代芳醇。该催化体系具有用于生产聚合物单体羧基酯的应用潜力。     

以类水滑石为前驱体的Cu/ZnO/Al2O3催化剂用于COx加氢合成甲醇：CO在反应混合物中的作用

近年来,催化CO₂加氢合成甲醇被视为有望解决温室效应和燃料枯竭的有效途径。目前,铜基催化剂因具有较高的反应活性被广泛应用于工业生产。然而,竞争逆水煤气变换反应产生的CO导致甲醇选择性较低,同时副产物水引起Cu发生不可逆烧结,进而降低甲醇产率。众所周知,CO能够调整分子的表面竞争吸附和活性位的氧化还原行为,本工作拟向原料气中掺入具有还原性的CO以抑制逆水煤气变换反应和防止表面氧化中毒。另一方面,通常认为铜基催化的CO₂加氢制甲醇是结构敏感性反应,不同的前驱体能够显著影响催化剂结构和形貌,进而影响催化活性。因此,我们首先通过共沉淀法和蒸氨法制备了含有类水滑石前驱体(CHT-CZA)和复合物前驱体(CNP-CZA)结构的Cu/ZnO/Al₂O₃催化剂。随后,为探究CO掺杂后反应机理,在250 ℃,5 MPa的反应条件下,含有不同比例CO的原料气中(CO₂:CO:H₂:N₂ = x:(24.5 - x):72.5:3)评价两种催化剂对甲醇合成的性能。评价结果显示两种催化剂反应性能趋势相同,随着CO含量增加,CO₂转化率和STY_H2O不断降低,STY_MeOH逐渐增加。X射线光谱(XPS)显示随CO含量增加,催化剂表面还原性Cu比例增加。评价和表征结果说明CO引入抑制了逆水煤气变换反应的发生,通过还原被H₂O氧化的活性Cu表面,促使更多的活性Cu位点暴露参与甲醇合成。另一方面,透射电镜(TEM)显示掺杂的CO会过度还原而引起颗粒团聚,导致催化剂逐渐失活。相比之下,含有水滑石前驱体的催化剂在任何气氛下均表现出更加优越的反应性能和长周期稳定性。这可归因于类水滑石前驱体独特的片层结构通过结构限域作用有效避免了因CO过度还原而导致的金属颗粒团聚,从而减少活性位点损失。     

高分散Co0.2Ni1.6Fe0.2P助催化剂改性P掺杂g-C3N4纳米片高效光催化析氢的研究

随着化石燃料使用的增加和温室气体排放量持续上升,20世纪以来气温上升得更快。开发环境友好型能源取代传统化石燃料是当务之急。氢能源作为一种清洁、高效的能源,被认为是最有希望取代传统化石燃料的能源。光催化水分解水产氢作为为一种环保型技术被认为是最有前景的氢能生产方法。提高光生电子-空穴对分离效率是构建高效光催化剂的关键。然而,利用高度分散的助催化剂构建高效、稳定的产氢光催化剂仍然是一个挑战。本文首次成功地采用一步原位高温磷化法制备了高度分散的非贵金属三金属过度金属磷化Co_0.2Ni_1.6Fe_0.2P助催化剂(PCNS-CoNiFeP)掺杂P的石墨相氮化碳纳米片(PCNS)。有趣的是,PCNS-CoNiFeP与传统氢氧前驱体磷化法制备的CoNiFeP相比,没有聚集性,分散性高。X射线衍射(XRD)、X射线光电子能谱(XPS)、元素映射图像和高分辨率透射电镜(HRTEM)结果表明,PCNS-CoNiFeP已成功合成。紫外-可见吸收光谱结果表明,PCNS-CoNiFeP在200–800 nm波长范围内较PCNS略有增加。光致发光光谱、电化学阻抗谱(EIS)和光电流分析结果表明,CoNiFeP助催化剂能有效促进光生电子-空穴对的分离,加速载流子的迁移。线性扫描伏安法(LSV)结果还表明,负载CoNiFeP助催化剂可大大降低CNS的过电位。结果表明,以三乙醇胺溶液为牺牲剂的PCNS-CoNiFeP最大产氢速率为1200 μmol·h^-1·g^-1,是纯CNS-Pt (320 μmol·h^-1·g^-1)的4倍。在420 nm处的表观量子效率为1.4%。PCNS-CoNiFeP在光催化反应中也表现出良好的稳定性。透射电镜结果表明,6–8 nm的CoNiFeP高度分散在PCNS表面。高度分散的CoNiFeP比聚集的CoNiFeP具有更好的电荷分离能力和更高的电催化析氢活性。由此可见,聚合的CoNiFeP-PCNs (300 μmol·h^-1·g^-1)的产氢速率远低于PCNS-CoNiFeP。此外,CNS的P掺杂可以改善其电导率和电荷传输。     

表面限域掺杂提升高比能正极材料稳定性

Lithium ion batteries (LIBs) have broad applications in a wide variety of a fields pertaining to energy storage devices. In line with the increasing demand in emerging areas such as long-range electric vehicles and smart grids, there is a continuous effort to achieve high energy by maximizing the reversible capacity of electrode materials, particularly cathode materials. However, in recent years, with the continuous enhancement of battery energy density, safety issues have increasingly attracted the attention of researchers, becoming a non-negligible factor in determining whether the electric vehicle industry has a foothold. The key issue in the development of battery systems with high specific energies is the intrinsic instability of the cathode, with the accompanying question of safety. The failure mechanism and stability of high-specific-capacity cathode materials for the next generation of LIBs, including nickel-rich cathodes, high-voltage spinel cathodes, and lithium-rich layered cathodes, have attracted extensive research attention. Systematic studies related to the intrinsic physical and chemical properties of different cathodes are crucial to elucidate the instability mechanisms of positive active materials. Factors that these studies must address include the stability under extended electrochemical cycles with respect to dissolution of metal ions in LiPF₆-based electrolytes due to HF corrosion of the electrode; cation mixing due to the similarity in radius between Li⁺ and Ni²⁺; oxygen evolution when the cathode is charged to a high voltage; the origin of cracks generated during repeated charge/discharge processes arising from the anisotropy of the cell parameters; and electrolyte decomposition when traces of water are present. Regulating the surface nanostructure and bulk crystal lattice of electrode materials is an effective way to meet the demand for cathode materials with high energy density and outstanding stability. Surface modification treatment of positive active materials can slow side reactions and the loss of active material, thereby extending the life of the cathode material and improving the safety of the battery. This review is targeted at the failure mechanisms related to the electrochemical cycle, and a synthetic strategy to ameliorate the properties of cathode surface locations, with the electrochemical performance optimized by accurate surface control. From the perspective of the main stability and safety issues of high-energy cathode materials during the electrochemical cycle, a detailed discussion is presented on the current understanding of the mechanism of performance failure. It is crucial to seek out favorable strategies in response to the failures. Considering the surface structure of the cathode in relation to the stability issue, a newly developed protocol, known as surface-localized doping, which can exist in different states to modify the surface properties of high-energy cathodes, is discussed as a means of ensuring significantly improved stability and safety. Finally, we envision the future challenges and possible research directions related to the stability control of next-generation high-energy cathode materials.     

Ru掺杂对Fe催化剂上酚类化合物加氢脱氧影响的密度泛函理论研究北大核心CSCD

采用密度泛函理论(DFT)计算研究了苯酚、邻甲酚、愈创木酚在不同结构Ru-Fe(211)表面上吸附活化性能和加氢脱氧反应路径.结果表明,Ru掺杂能促进H2分子在Fe(211)表面上解离,提高加氢脱氧反应速率.酚类在1Ru_(ads)-Fe(211)表面上吸附比在1Ru_(sub)-Fe(211)表面上更稳定,苯酚和邻甲酚脱羟基步骤能垒分别降低0.13和0.28 eV,有利于生成芳烃.愈创木酚在1Ru_(sub)-Fe(211)表面上加氢脱氧优势路径是先脱甲氧基生成苯酚,苯酚再加氢脱氧生成产物苯(速控步骤能垒1.16 eV);而在1Ru_(ads)-Fe(211)表面上愈创木酚先脱羟基再脱甲基生成苯酚的路径更具有动力学优势(速控步骤能垒1.21 eV).计算结果表明Ru掺杂方式影响Fe催化剂对酚反应分子的吸附稳定性以及加氢脱氧反应路径和性能.与1Ru掺杂Fe(211)催化剂相比,增加Ru原子数形成4Ru_(ads)-Fe(211),能够进一步提高酚类反应物的吸附强度,但导致加氢脱氧反应能垒升高.因此,在Fe催化剂上以表面吸附的形式掺杂少量贵金属Ru更利于酚类加氢脱氧生成芳烃.     

钨合金的冲击动力学性质及细微观结构的影响

简单介绍了钨合金(主要为W-Ni-Fe)的制备工艺和常用热处理方法,其后着重从动 态力学性能、剪切带的实验观察和研究、细微观结构对材料力学性能的影响等几方 面总结和评述了近年来针对钨合金取得的主要结果.并在文章的最后初步提出了有 前景的几个研究方向.     

咪唑四氟硼酸盐离子液体中磷钼酸掺杂聚吡咯薄膜修饰电极的制备及其电催化活性

以1-丁基-3-甲基咪唑四氟硼酸盐(BMIMBF4)离子液体作为介质,利用电化学方法在铂电极表面制备了磷钼酸掺杂聚吡咯薄膜;采用扫描电子显微镜观察了所制备的薄膜的形貌,利用热重分析评价了其热稳定性,利用循环伏安法测定了其电化学活性和对甲醇的电催化氧化活性.结果表明,与传统的硫酸溶液相比,以BMI-MBF4离子液体作为反应介质制备的修饰电极的表面形貌更均匀,电化学活性和对甲醇的电催化氧化活性更强.     

氟掺杂提高纳米二氧化钛光催化活性的研究进展

纳米二氧化钛(TiO2)具有光催化活性高、无毒、化学性质稳定、成本低等优点,是目前最具发展前景的光催化剂。但TiO2的宽禁带和低量子效率限制了它的实际应用。因此,对TiO2进行改性研究,实现TiO2的可见光响应和提高其量子效率成为研究的热点。氟掺杂不仅能够使TiO2具有可见光催化活性,而且可提高其紫外光催化活性。本文综述了氟掺杂TiO2的制备,氟掺杂提高TiO2光催化活性的机理、氟与其他元素共掺杂TiO2的研究进展。