一步制备高比表面积介孔Co3O4-CeO2及其表征

以有序介孔二氧化硅KIT-6为硬模板,硝酸钴、硝酸铈为金属源,分别在真空辅助条件和普通搅拌条件下制备了介孔CoCeOx复合氧化物。采用XRD、SEM、TEM、N2吸脱附等技术表征了复合氧化物的物化性质,并评价其氧化甲苯的性能。结果表明,在真空辅助和搅拌条件下制备的CoCeOx氧化物是由Co3O4和CeO2组成的介孔Co3O4-CeO2复合氧化物,其比表面积分别为141和89 m^2·g^-1,平均孔径分别为8.7和9.6 nm。真空辅助纳米复制过程有利于金属盐的前驱体充分填充到模板的孔隙中,去除模板后,可以得到有序的介孔复合金属氧化物。所制备介孔钴铈复合氧化物具有孔道有序性好、比表面积大的特点,在挥发性有机化合物的氧化去除方面具有一定的应用前景。     

溶剂诱导翻转Pickering乳液用于原位循环使用酶催化剂

Separation and recycling of catalysts are crucial for realizing the objectives of sustainable and green chemistry but remain a great challenge, especially for enzyme biocatalysts. In this work, we report a new solvent-induced reversible inversion of Pickering emulsions stabilized by Janus mesosilica nanosheets (JMSNs), which is then utilized as a strategy for the in situ separation and recycling of enzymes. The interfacial active solid particle JMSNs is carefully characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen sorption experiments, Fourier transform infrared (FT-IR) spectroscopy, and thermogravimetric analysis (TGA).The JMSNs are demonstrated to show order-oriented mesochannels with a large specific surface area, and the hydrophobic octylgroup is selectively modified on one side of the nanosheets. Furthermore, the inversion is found to be a fast process that is strongly dependent on the interfacial activity of the solid emulsifier JMSNs. Such a phase inversion is also a general process that can be realized in various oil/water phasic systems, including ethyl acetate-water, octane-water, and cyclohexane-water systems. By carefully analyzing the capacity of JMSNs with different surface wettabilities for phase inversion, a triphase contact angle (θ) close to 90° and a critical oil-water ratio of 1 : 2 are identified as the key factors to achieve solvent-induced phase inversion via a catastrophic phase inversion mechanism. Importantly, this reversible phase inversion is suitable for the separation and recycling of enzyme biocatalysts that are sensitive to changes in the reaction medium. Specifically, during the reaction, the organic substrates are dissolved in the oil droplets and the water-soluble catalysts are dispersed in the water phase, while a majority of the product is released into the upper oil phase and the enzyme catalyst is confined inside the water droplets in the bottom layer after phase inversion. The perpendicular mesochannels of JMSNs provide a highly accessible reaction interface, and their excellent interfacial activity allows for more than 10 rounds of consecutive phase inversions by simply adjusting the ratio of oil to water in the system. Using the enzymatic hydrolysis kinetic resolution of racemic acetate as an example, our Pickering emulsion system shows not only a 3-fold enhanced activity but also excellent recyclability. Because no sensitive chemical reagents are used in this phase inversion process, the intrinsic activities of the catalysts can be preserved even after seven cycles. The current study provides an alternative strategy for the separation and recycling of enzymes, in addition to revealing a new innovative application for Janus-type nanoparticles.     

对BJH方法计算孔径分布过程的解读

This paper introduces the geometric assumptions and neglects of the pore size distribution calculated by BJH method, the arithmetic approximation for simplified calculation, the derivation process of each parameter, the calculation steps and key points of the pore size distribution. This paper also introduces the application scope of BJH method at the current instrument level, and how to further integrate the data. In order to get the required analysis and test report, references are provided for the subsequent adjustment of test parameters and improvement of test methods. Some problems often encountered in reading experimental reports are also discussed.     

核壳硅碳复合微球固定相的制备及其在糖类分离中的应用

采用一步法在二氧化硅(SiO₂)表面涂覆酚醛树脂聚合物(PF),并在氮气气氛下碳化,制备了核壳硅碳复合微球(Sil@MC)固定相。实验对Sil@MC固定相进行形貌观察和孔结构分析,表明制备出的Sil@MC固定相具有良好的单分散性,包覆后的Sil@MC材料比表面积为302 m²/g,平均孔径为9.5 nm,孔容为0.63 cm³/g,说明通过共聚反应成功地将碳材料固定在二氧化硅上。将制备的Sil@MC材料作为HPLC固定相,采用匀浆法装柱,以乙腈-水(含0.1%(v/v)甲酸)作为流动相,发现Sil@MC色谱柱在高效液相色谱-质谱中可以实现4种极性糖类化合物(D-(+)-氨基葡萄糖盐酸盐、葡萄糖、D-(+)-海藻糖二水合物和棉子糖)的分离,然而未涂覆酚醛树脂的SiO₂材料未能对这4种极性糖类化合物实现分离。实验进一步对Sil@MC固定相的性能进行了评价,代表性的低聚糖异构体松三糖和棉子糖、耐斯糖和水苏糖及乳寡糖异构体3'-唾液酸乳糖和6'-唾液酸乳糖、乳-N-四糖和乳-N-新四糖在Sil@MC色谱柱中被成功分离,峰形良好,展现了基于酚醛树脂衍生碳的核壳硅碳复合材料在在极性化合物色谱分离方面具有应用潜力。     

Cu/SiO_2结构及其催化苯酚羟基化反应性能的研究

以不同结构的SiO_2为载体,采用传统浸渍法,合成3种负载型的Cu/SiO_2.使用X射线衍射(XRD)、 N_2的等温吸-脱附、紫外漫反射光谱(DR UV-vis)、 X射线电子能谱(XPS)、等离子原子发射光谱(ICP)和H_2的程序升温还原(H_2-TPR)方法对样品进行表征.考察了以H_2O_2为氧化剂,样品对苯酚直接羟基化合成苯二酚的催化性能.结果表明:具有介孔和MFI结构的二氧化硅(MS-1),稳定性强,有利于引入Cu物种在其孔内扩散及分布,形成更多的高分散CuO.一定反应条件下, Cu/MS-1催化活性最高,苯二酚的收率和选择性分别高达38.91%和81.5%. Cu/MS-1催化剂重复使用10次后,苯二酚的收率为37.64%,而Cu含量仅从2.5%变为2.1%,具有较强稳定性;高分散CuO是目标反应的主要活性物种.     

分级孔结构g-C3N4光催化剂的制备及性能

以单分散SiO2为模板,通过简单的一步煅烧法制备具有分级孔结构的g-C3N4。与体相g-C3N4相比,分级孔结构的g-C3N4不仅可见光吸收性能和比表面积得到提高,而且更有利于光生电子-空穴的分离。此外,具有分级孔结构的g-C3N4具有明显增强的可见光驱动的光催化产氢活性,当SiO2和二氰二胺质量比为1∶1时,制备所得g-C3N4(C3N4-2)产氢速率几乎是体相g-C3N4的18倍。     

有序介孔炭负载铜基催化剂Cu/CMK-3用于气相甲醇氧化羰基化反应

通过纳米浇铸法合成了有序介孔炭CMK-3,再通过浸渍法制备了Cu/CMK-3催化剂,并将其用于气相甲醇氧化羰基化反应。N2吸附-脱附测试、X射线衍射(XRD)以及透射电镜(TEM)的表征结果表明,Cu/CMK-3具有序介孔结构,活性Cu物种均匀分散于CMK-3的表面及孔道中,粒径为10~20 nm,远小于相同条件下制备的铜/活性炭(Cu/AC)催化剂。固定床反应器的活性评价结果显示450℃下制备的Cu/CMK-3催化活性最高,反应10 h内碳酸二甲酯(DMC)的时空收率(STY)达到286 mg·g^-1·h^-1,选择性为76%。长周期活性评价结果表明Cu/CMK-3稳定性较相同条件下制备的Cu/AC有大幅提高,50 h内DMC的STY降低了20%,75 h内降低了28%。     

活性炭吸附脱除水中抗生素污染物研究进展

活性炭对抗生素污染物吸附性能的主要影响因素是其孔结构和化学结构性质。活性炭孔结构的构建方法可分为活化法、模板法和原位法,化学结构性质的调控方法可分为后处理法和原位法,掺杂的元素有氧、氮、硫、磷、硼等。围绕抗生素污染物的吸附,综述了活性炭的性质调控方法,并展望了活性炭性质调控的发展方向,为新型高效活性炭吸附剂的构建及吸附机理的研究提供了指导与借鉴。     

炭黑颗粒及氟粒子辅助法合成多级结构MCM-22分子筛及其催化性能

以碳黑为第二模板剂在氟离子体系中一步水热合成了多级结构MCM-22分子筛组装体（简称为MCM-22-FC）。考察了碳黑和氟离子对MCM-22分子筛形貌和催化性能的影响。MCM-22-FC分子筛是由大量片状晶体交错生长形成的组装体结构,其中MCM-22的片层结构更薄,在其固有的微孔中存在的晶间孔呈现大孔和介孔的特征。MCM-22-FC负载Mo后得到的Mo/MCM-22-FC催化剂在甲烷无氧芳构化反应（MDA）中提高了苯收率和芳烃选择性,并且提高了催化剂的寿命。通过氨气程序升温脱附（NH₃-TPD）表征,吡啶红外（Py-IR）表征,结合热重（TG）分析,得出的结论是Mo/MCM-22-FC在MDA中优越的催化性能是由于氟离子进入到分子筛骨架当中,形成具有拉电子效应的结构单元,从而提高了分子筛的Brönsted酸量,较多的Brönsted酸性位将更多的Mo物种迁移至分子筛孔道内部,形成更多的MoC_x或MoO_xC_y活性物种以及更有利于大分子产物扩散的MCM-22薄片层的结构。少量过剩的Brönsted酸性位在成型后保留在Mo/HMCM-22-FC催化剂活性中心抑制了积碳的形成,也有助于改善芳烃的选择性。     

以一种新型Gemini表面活性剂作为介孔模板剂通过转晶过程合成介孔ZSM-5分子筛

将一种新型Gemini表面活性剂,丙撑基双(十八烷基二甲基氯化铵)[C18H37(CH3)2–N+–(CH2)3–N+–(CH3)2C18H37]Cl2(C18-3-18),作为介孔模板剂用于水热法合成介孔ZSM-5分子筛.结果表明,在130 oC低温晶化即可高效合成介孔ZSM-5分子刷.C18-3-18的加入量可影响到所合成介孔ZSM-5分子筛的相对结晶度和织构性质,它的形成遵从一个转晶过程.在合成初期,凝胶中介孔模板剂C18-3-18的使用导向了介孔材料的生成;随后在TPABr的模板作用下,介孔材料慢慢转晶生成具有MFI结构的介孔ZSM-5;然后所合成的介孔ZSM-5晶粒进一步长大并聚集形成块状颗粒,同时产生晶间介孔.C18-3-18作为介孔导向剂不仅可用于合成介孔ZSM-5分子筛,也可用于其它介孔分子筛的合成中.