眼模型下的投影式头盔物镜设计及视空间评价

进一步完善了投影式头盔系统的视空间评价方法,应用接近实际情况的眼模型来模拟人眼对头盔物镜系统进行评价。由视空间的评价结果出发,从眼模型的成像效果反过来进一步指导头盔系统的设计工作。设计结果显示,轴上视场和大视场的调制传递函数特性良好,在轴上视场可以达到1′的人眼最小分辨角,在大视场可以达到微显示器单个像素确定的视锐度,表明此系统在视空间的分辨力满足实际使用需要。系统最大畸变小于5%,色差不会对人眼分辨产生影响。     

鸟嘌呤与氨基酸残基体系的极化力场

发展了应用于鸟嘌呤G和氨基酸残基体系的浮动电荷力场, 该力场明确定义了孤对电子和键的电荷和位置, 通过电荷随着环境的浮动来体现极化效应; 通过氢键拟合函数k_HB描绘了氢键键能. 应用量子化学方法, 对G与氨基酸残基体系从氢键、 几何结构及电荷分布3个方面展开计算及分析, 并以其为基准, 确定参数发展了适用于G与氨基酸残基氢键体系的ABEEMσπ PFF. 采用3种不同力场模拟目标分子的结构和性质. 模拟结果表明, 发展的ABEEMσπ PFF与量子化学方法具有最好的一致性, 可用于模拟生物大分子体系.     

Design and synthesis of catenated rings based on toroidal DNA structures

Strand proximity and self-crossing that occur intrinsically in the relaxed forms of toroidal DNA are utilized unprecedentedly in our investigations for creating catenated DNA rings. In addition, our current studies show that the geometrical shapes of our newly obtained catenated DNA circles as well as their topological arrangements are vividly visible under atomic force microscopic examination.     

60°对角视场的折/衍混合透视型头盔显示器

分析了离轴、大视场角透视型头盔显示器光学系统的设计方法，提出了利用衍射光学的独特性质设计了大视场、宽波段、离轴折/衍混合透视型头盔显示器光学系统.该系统具有10 mm的出瞳直径和22 mm的出瞳距离，且满足人因素要求.另外，该系统色差仅14 μm，系统口径小于46 mm，满足双目视觉要求.整个系统适合具有15 mm对角直径SVGA分辩率的彩色液晶显示器（LCD）.     

Interference of intrinsic curvature of DNA by DNA-intercalating agents

It has been demonstrated in our studies that the intrinsic curvature of DNA can be easily interrupted by low concentrations of chloroquine and ethidium bromide. In addition, the changes of DNA curvature caused by varying the concentration of these two DNA intercalators can be readily verified through using an atomic force microscope.     

Characterizations of perturbations of spectra of 2×2 upper triangular operator matrices

When $A\in B\left(H\right)$ and $B\in B\left(K\right)$ are given, we denote by $M_C$ the operator acting on the infinite dimensional separable Hilbert space $H\oplus K$ of the form $M_C=\left(\begin{array}{cc}\hfill A\hfill & \hfill C\hfill \\ \hfill 0\hfill & \hfill B\hfill \end{array}\right)$. In this paper, we first give some necessary and sufficient conditions for $M_C$ to be a left invertible operator (an upper semi-Weyl, upper semi-Fredholm) operator for some $C\in B(K,H)$, which extend the corresponding results in Cao et al. (2006) [4], Cao and Meng (2005) [5], Hwang and Lee (2001) [12] and Li and Du (2006) [15]. Then we present some counter-examples.     

以2,2,5,5-四氟-2,5-二氢呋喃桥连的1,2-二噻吩乙烯类光致变色分子的合成

设计并合成了新型的以2,2,5,5-四氟-2,5-二氢呋喃桥连的1,2-二噻吩乙烯类光致变色分子1,从廉价易得的六氯丁二烯出发,经醇解、氯化、关环和氟化反应合成了关键中间体全氟2,5-二氢呋喃(2),并通过与化合物3'-溴-[2,2':5',2']三噻吩(3)的偶合反应得到含氟光致变色分子1.     

表面引发的原子转移自由基聚合法在聚偏二氟乙烯表面制备可控的聚甲基丙烯酸甲酯刷

采用表面引发的原子转移自由基聚合法(ATRP)在聚偏二氟乙烯(PVDF)表面制备结构可控的聚甲基丙烯酸甲酯刷。通过碱处理和紫外光照溴代的方法,将ATRP引入到PVDF表面; 然后采用ATRP法将甲基丙烯酸甲酯接枝到溴代的PVDF表面。采用傅里叶变换红外光谱和X-射线光电子能谱对改性前后PVDF表面的结构进行了表征。结果表明甲基丙烯酸甲酯成功地接枝到了PVDF表面。     

Effect of solution concentrations on crystal structure,surface topographies and photoluminescence properties of ZnO thin films

Zinc oxide thin films were deposited on silicon substrates via hydrothermal method. Microstructures, surface topographies and optical properties of ZnO thin films were systematically investigated by X-ray diffraction, atomic force microscopy and fluorescence spectrophotometer. The mean grain size and surface roughness of the thin films decrease first and then increase with increasing the concentration of zinc nitrate hexahydrate. The photoluminescence spectra of ZnO thin films, excited by the 240, 320, 360, 380 and 400 nm excitation wavelength, were investigated in detail. Based on our analysis, it can be noted that mechanisms of the ultraviolet, violet and blue emissions are attributed to the transitions from the localized levels below the conduction band, zinc vacancy, interstitial zinc and extended interstitial zinc levels to the valance band, respectively. Blue–violet emissions of ZnO have great potential in light emitting and biological fluorescence labeling applications.     

彩色编码投影光栅三维轮廓术中分色问题的研究

针对彩色编码投影栅三维轮廊术所需的分色技术要求,根据光度学的原理,提出了一种由RGB格式到HIS格式的变换关系,同时给出了逆变换关系式,亮度I定义为R,G,B三个分量的平均值,白度S定义为R,G,B三个分量中最小的分量除以亮度值。用R．G．B三个分量中的最小值去减另外两个分量,得到该像素所对应的光谱色,然后由这两个分量的比值来确定色度H。在HIS格式中将亮度与颜色信息分离开,在进行分色处理时可以不受亮度变化的影响,通过设定固定的阈值,可以将红,绿,蓝,青,品,黄几种颜色有效地区分开来。