Automated flow-based anion-exchange method for high-throughput isolation and real-time monitoring of RuBisCO in plant extracts

In this work, a miniaturized, completely enclosed multisyringe-flow system is proposed for high-throughput purification of RuBisCO from Triticum aestivum extracts. The automated method capitalizes on the uptake of the target protein at 4 °C onto Q-Sepharose Fast Flow strong anion-exchanger packed in a cylindrical microcolumn (105 × 4 mm) followed by a stepwise ionic-strength gradient elution (0-0.8 mol/L NaCl) to eliminate concomitant extract components and retrieve highly purified RuBisCO. The manifold is furnished downstream with a flow-through diode-array UV/vis spectrophotometer for real-time monitoring of the column effluent at the protein-specific wavelength of 280 nm to detect the elution of RuBisCO. Quantitation of RuBisCO and total soluble proteins in the eluate fractions were undertaken using polyacrylamide gel electrophoresis (PAGE) and the spectrophotometric Bradford assay, respectively. A comprehensive investigation of the effect of distinct concentration gradients on the isolation of RuBisCO and experimental conditions (namely, type of resin, column dimensions and mobile-phase flow rate) upon column capacity and analyte breakthrough was effected. The assembled set-up was aimed to critically ascertain the efficiency of preliminary batchwise pre-treatments of crude plant extracts (viz., polyethylenglycol (PEG) precipitation, ammonium sulphate precipitation and sucrose gradient centrifugation) in terms of RuBisCO purification and absolute recovery prior to automated anion-exchange column separation. Under the optimum physical and chemical conditions, the flow-through column system is able to admit crude plant extracts and gives rise to RuBisCO purification yields better than 75%, which might be increased up to 96 ± 9% with a prior PEG fractionation followed by sucrose gradient step.     

固-液相转移催化1,2,4-三唑N-烷基化的研究

本文研究了相转移催化条件下的1,2,4-三唑烷基化反应。评价了几种相转移催化剂,结果表明PEG是合适的固-液相转移催化剂。在相转移催化剂作用下,用不同的烷基化剂制备了一系列N-1取代的1,2,4-三唑,并对实验的结果进行了讨论。     

KF/Al~2O~3/PEG 4000(FAP)存在下氯仿的Michael加成反应

在KF/Al~2O~3/PEG4000(FAP)存在下,氯仿可与α,β-不饱和羰基化合物进行Michael加成反应,得到中等产率的三氯甲基化合物。     

Beyond labels: A review of the application of quantum dots as integrated components of assays, bioprobes, and biosensors utilizing optical transduction

A comprehensive review of the development of assays, bioprobes, and biosensors using quantum dots (QDs) as integrated components is presented. In contrast to a QD that is selectively introduced as a label, an integrated QD is one that is present in a system throughout a bioanalysis, and simultaneously has a role in transduction and as a scaffold for biorecognition. Through a diverse array of coatings and bioconjugation strategies, it is possible to use QDs as a scaffold for biorecognition events. The modulation of QD luminescence provides the opportunity for the transduction of these events via fluorescence resonance energy transfer (FRET), bioluminescence resonance energy transfer (BRET), charge transfer quenching, and electrochemiluminescence (ECL). An overview of the basic concepts and principles underlying the use of QDs with each of these transduction methods is provided, along with many examples of their application in biological sensing. The latter include: the detection of small molecules using enzyme-linked methods, or using aptamers as affinity probes; the detection of proteins via immunoassays or aptamers; nucleic acid hybridization assays; and assays for protease or nuclease activity. Strategies for multiplexed detection are highlighted among these examples. Although the majority of developments to date have been in vitro, QD-based methods for ex vivo biological sensing are emerging. Some special attention is given to the development of solid-phase assays, which offer certain advantages over their solution-phase counterparts.     

A ONE-STEP SURFACE MODIFICATION PROCEDURE TO PEG-GRAFTED NANO-TITANIA

PEG （Polyethylene Glycol）-grafted nano-titania has been obtained in a one-step procedure using hexamethylene diisocyanate as the coupling agent and dibutyltin dilaurate as the catalyst in toluene at 80℃ and characterized qualitatively by FTIR and quantitatively by elemental analysis and thermogravimetric analysis. A comparison of nano-titania with two other commonly used inorganic nanoparticles, nano-silica and nano-alumina, is made, revealing that reactivity order is nano- silica 〉 nano-alumina 〉 nano-titania in view of PEG grafting. Possible mechanism of PEG grafting is also discussed.     

聚乙二醇蓄热调温性能及其在功能纺织品上的应用

对聚乙二醇(PEG)的自身交联及其与纤维素纤雏之间的交联反应进行了研究，探讨了交联前后PEG热活性的变化，并对PEG在焙烘交联时的受热稳定性以及分子量对热活性的影响进行了讨论。研究表明，PEG发生交联反应后，热性能参教产生偏移，热活性降低；热活性与分子量有直接关系；过高的焙烘温度将导致PEG氧化降解，热活性下降。在适宜的工艺条件下，纺织品经PEG后整理可获得热活性。     

One-pot Synthesis of Isoxazolines Using Soluble Polymer-supported Acrylate

An eficient liquid-phase synthesis of isoxazolines through a 1,3-dipolar cycloaddition is described.Soluble polymer-supported acrylate reacted with nitrile oxides generated in-situ,followed by cleavage from the support giving corresponding isoxazolines in high yields and excellent purities.     

Volume and compressibility changes on mixing aqueous solutions of the amino acid and poly(ethylene glycol)

The volume and compressibility changes on mixing aqueous solutions of the amino acid and poly(ethylene glycol) were measured with a vibration densimeter and a sing-around velocimeter at 298.15 K. For the system of alanine-PEG-H₂O, the additivity rule for the mean apparent molal volume and compressibility at infinite dilution held, and the excess volume and compressibility changes on mixing were obtained. For the system of glycine-PEG-H₂O, the additivity rule for the mean apparent molal compressibility at infinite dilution did not hold. While the mean apparent molal volume and compressibility changes were negative and positive for the systems of another amino acid-PEG-H₂O, respectively, where amino acids were valine, isoleucine, leucine, phenylalanine, and tryptophan. These results suggest that glycine and alanine are excluded from the hydration layer around PEG chain and the amino acids with a larger side chain than alanine are bound to the PEG chain due to the hydrophobic interaction. The hydration number per monomer around PEG chain was estimated to be 3.9.     

Simple test system for single molecule recognition force microscopy

We have established an easy-to-use test system for detecting receptor-ligand interactions on the single molecule level using atomic force microscopy (AFM). For this, avidin-biotin, probably the best characterized receptor-ligand pair, was chosen. AFM sensors were prepared containing tethered biotin molecules at sufficiently low surface concentrations appropriate for single molecule studies. A biotin tether, consisting of a 6 nm poly(ethylene glycol) (PEG) chain and a functional succinimide group at the other end, was newly synthesized and covalently coupled to amine-functionalized AFM tips. In particular, PEG₈₀₀ diamine was glutarylated, the mono-adduct NH₂-PEG-COOH was isolated by ion exchange chromatography and reacted with biotin succinimidylester to give biotin-PEG-COOH which was then activated as N-hydroxysuccinimide (NHS) ester to give the biotin-PEG-NHS conjugate which was coupled to the aminofunctionalized AFM tip. The motional freedom provided by PEG allows for free rotation of the biotin molecule on the AFM sensor and for specific binding to avidin which had been adsorbed to mica surfaces via electrostatic interactions. Specific avidin-biotin recognition events were discriminated from nonspecific tip-mica adhesion by their typical unbinding force (∼40 pN at 1.4 nN/s loading rate), unbinding length (<13 nm), the characteristic nonlinear force-distance relation of the PEG linker, and by specific block with excess of free d-biotin. The convenience of the test system allowed to evaluate, and compare, different methods and conditions of tip aminofunctionalization with respect to specific binding and nonspecific adhesion. It is concluded that this system is well suited as calibration or start-up kit for single molecule recognition force microscopy.     

Thermal investigation of PEG 4000 — oxazepam binary system

A thermal study using DSC and Hot Stage Microscopy (HSM) was carried out to investigate the interaction in solid state of the binary system PEG 4000 — oxazepam, and to establish their phase diagram. The eutectic composition, which melting occurs at lower temperature as compared with the pure components, has been determined. The results obtained by DSC and HSM have indicated that PEG 4000 — oxazepam mixtures displays no obvious incompatibilities, and that the system shows a typical eutectic behaviour. However because of the closeness of the melting of PEG 4000 to the eutectic temperature, it was difficult to determine precisely the eutectic composition and temperature on the basis of DSC measurements alone. The use of heats of fusion corresponding to physical mixtures allowed an estimation of the eutectic composition at 6% w/w oxazepam. Additional information of temperature (57.6C) and composition (5–10% w/w oxazepam) of the eutectic was obtained by HSM using the contact method. This low melting temperature in this range of compositions offers advantages in terms of drug stability and easy manufacture.