聚乙二醇支持的2,5-二取代异噁唑啉衍生物的液相合成

介绍了通过1,3-偶极环加成合成2,5-二取代异噁唑啉衍生物的液相合成方法, 利用聚乙二醇(PEG)支持的烯烃与由醛肟制得的腈氧化物反应制备了多种异噁唑啉衍生物, PEG解脱后产物的产率和纯度均很高.     

Novel Method for Soluble‐Polymer‐Supported Synthesis of 3,4,5‐Trisubstituted Isoxazoles

A practical and efficient liquid‐phase synthesis of 3,4,5‐trisubstituted isoxazoles using poly(ethylene glycol) as supported is described. Soluble‐polymer‐supported nitrile oxide generated in situ reacted with chalcones to afford polymer‐supported isoxazolines, which were cleaved by sodium methoxide to generate 3,4,5‐trisubstituted isoxazoles instead of 3,4,5‐trisubstituted isoxazolines. This sequential process provided a novel method to synthesize 3,4,5‐trisubstituted isoxazoles.     

One-pot Synthesis of Isoxazolines Using Soluble Polymer-supported Acrylates

An efficient and rapid parallel liquid-phase synthesis of isoxazolines has been reported.The one-pot three-component reaction of polyethylene glycol-supported acrylates, aldehydes and hydroxylamine hydrochloride in the presence of chloramine-T in methanol gave the corresponding PEG-supported isoxazolines, which can be cleaved from the support under mild condition to afford isoxazolines in good yields (＞80%) and high purities (＞86%).     

Hypervalent iodine-mediated interaction of aldoximes with activated alkenes including Baylis-Hillman adducts: a new and efficient method for the preparation of nitrile oxides from aldoximes

Treatment of aldoximes with activated alkenes in the presence of diacetoxy iodobenzene (DIB) afforded isoxazolines in high yields. The method has been applied for the preparation of polyfunctional isoxazolines from Baylis-Hillman adducts.     

Synthesis and new rearrangements of 4-isoxazolin-4,5-dicarboxylic acid derivatives

Acyclic nitrones react with dimethyl acetylenedicarboxylate (DMAD) to give stable isoxazolines, from which the ones that contain electron-donating aromatic rings at the C3 position (R¹) were shown to undergo unprecedented fragmentation at room temperature, giving the R¹-aldehyde and inseparable product mixtures, probably due to the formation of highly reactive species such as iminocarbenes. Attempts to convert the isoxazolines to the corresponding stable azomethine ylides, by refluxing in toluene, again led to the same product mixtures as above (e.g., the room temperature decomposition). Isoxazolines when reacted with methoxide at room temperature afforded highly functionalised diastereomeric mixtures. Also, isoxazolines, when reacted with propylamine, gave the corresponding amides regioselectively, all of which were more stable than the parent isoxazolines.     

1,3-Dipolar cycloadditions of 2-thio-3-chloroacrylamides with nitrile oxides and nitrones

1,3-Dipolar cycloadditions of 2-thio-3-chloroacrylamides with nitrile oxides and nitrones is described. A series of novel isoxazolines are isolated from the nitrile oxide cycloadditions, whilst the isoxazolines generated from the nitrone cycloadditions undergo further ring opening to yield piperidines.     

Acyclic nitronate olefin cycloaddition (ANOC): regio- and stereospecific synthesis of isoxazolines

We report the first demonstrations of intra- and intermolecular acyclic nitronate olefin cycloaddition (ANOC) reactions that enable the highly efficient syntheses of isoxazolines bearing various functional groups. This general approach to accessing γ-lactone fused isoxazolines was hitherto unprecedented. The room temperature transformations reported herein exhibit wide substrate scopes, as evidenced by more than 70 examples, including the generation of five tricyclic isoxazolines. The robustness of this methodology was confirmed by a series of trials that afforded highly functionalized isoxazolines. Both experimental results and density functional theory calculations indicate that these transformations proceed via the in situ formation of acyclic nitronates together with concerted [3+2] cycloaddition and tert-butyloxy group elimination processes to give regio- and stereospecificity.

A novel acyclic nitronate olefin cycloaddition (ANOC) reaction was successfully established, which enabled facile construction of various isoxazolines.     

Solid-phase synthesis of heterocyclic nucleoside analogues: substituted uracils tethered to isoxazoles, isoxazolines, and triazoles from a selenopolystyrene resin

A heterocyclic nucleoside analogue library of uracils N1 tethered to isoxazoles, isoxazolines, and triazoles and uracil N3 tethered to isoxazolines and isoxazoles was constructed by solid-phase organic synthesis. This strategy opens the way for the generation of small libraries of heterocyclic nucleoside analogues for biological screening.     

Reaction of hydroxylamine with 5-aminooxazoles. A new route to isoxazoles

The nucleophilic attack of hydroxylamine at the 5 position of 2-aryl-4-trifluoroacetyl-5-amino-oxazoles leads to a mixture of stereoisomeric isoxazolines. Dehydration of these isomeric isoxazolines in the presence of trifluoroacetic anhydride gives 3-amino-4-acylamino-5-trifluoromethylisoxazoles. The structures and spectroscopic data of these compounds are discussed.     

Facile synthesis of carbohydrate-integrated isoxazolines through tandem [4+1] cycloaddition and rearrangement of 2-nitroglycals

Carbohydrate-integrated isoxazolines were synthesized from 2-nitroglycals and sulfur ylides, with the aid of 1-phenylthiourea catalyst. The reactions proceeded via [4+1] annulations and upon subsequent rearrangement, afforded the corresponding isoxazolines in high yields with excellent diastereoselectivities (up to 95% de).     

Mo(CO)6-mediated synthesis of calix[4]arenes carrying β-hydroxy ketones or α,β-unsaturated-β-amino ketones

Mo(CO)₆-mediated ring opening reactions of calix[4]arene isoxazolines/isoxazoles provide a new synthetic methodology for calix[4]arenes carrying bifunctional β-hydroxy ketones or α,β-unsaturated-β-amino ketones. Mo(CO)₆ is a highly selective and convenient reagent for the ring opening process of these supramolecular isoxazolines/isoxazoles.     

Synthesis of Spirocyclic and Fused Isoxazoline Building Blocks

A highly efficient multigram synthesis of spirocyclic and fused isoxazoline building blocks is described. Isoxazoline-3-carboxylates were synthesized via a regioselective 1,3-dipolar cycloaddition reaction of 2-chloro-2-(hydroxyimino)acetate and carbo- or heterocyclic alkenes bearing endo- or exocyclic C=C double bonds, resulting in fused or spirocyclic isoxazolines, respectively. The preparation of up to 300 g of these compounds was achieved in a single run. The ester group of isoxazolines was then subjected to common synthetic transformations for the synthesis of corresponding building blocks, including alcohols, chlorides, azides, amines, aldehydes, carboxylic acids, amino acids and their derivatives, difluoromethyl-substituted compounds, and bicyclic γ-lactones. Additionally, a direct cycloaddition-based approach to the synthesis of aminoalkyl- and chloromethyl-substituted isoxazolines was proposed to improve their preparation. The described isoxazoline building blocks are expected to be valuable tools for drug discovery.     

Synthesis of stable isoxazolines by [3+2] cycloaddition of oxaziridines with alkynes

N-Alkyl substituted oxaziridines undergo a [3+2] cycloaddition reaction with a variety of terminal alkynes to give the product isoxazolines, whose stability appears to depend on the electronic properties of the groups on the C-3 and C-5 positions. The presence of an electron withdrawing group on C-5 and/or an electron donating group on C-3 causes isomerization of the isoxazolines to β-amino enones.     

SOLID PHASE SYNTHESIS OF ISOXAZOLINES

1. INTRODUCTION A solid phase organic synthesis (SPOS) has increasingly attracted chemist抯 attention over the past decades [1~3]. It was found that the compounds with biological activity are mostly derived from heterocycle structures. It is therefore no…     

SOLID PHASE SYNTHESIS OF ISOXAZOLINES

The solid-phase synthesis of isoxazolines on 2-polystyrylsulfonamidoethanol resin isreported. 2-Polystyrylsuifonamidoethanol resin 1 was reacted with acryloyl chloride to afford2-polystyrylsulfonylamidoethyl acrylate resin 2, which was further reacted with brominatedaldoximes by [3+2] cycioaddition to give isoxazoline resin 4. Resin 4 was treated with aqueous 6mol/L HCI solution to obtain isoxazolines in good yield and purity.     

Regioselectivity of 1,3‐Dipolar Cycloadditions of Benzonitrile Oxide to Alkenyl Boronic Esters: An Experimental and Computational Study

1,3‐Dipolar cycloaddition reactions of benzonitrile oxide to monosubstituted or 1,1‐disubstituted alkenyl boronic ester gave only 2‐isoxazolines, bearing the boronic ester group at the 5‐position of the ring. On the other hand, the cycloaddition reactions of benzonitrile oxide with trans‐1,2‐disubstituted alkenyl boronic esters produced 2‐isoxazolines, bearing the boronic ester group at the 4‐position of the ring. We used quantum mechanical calculations to investigate two regioisomeric channels that were associated with the formation of 2‐isoxazolines, bearing the boronic ester group at the 4‐position or 5‐position. The study revealed that the experimental results agreed well with the parameters based on the transition state energies in gas or solvent phase. The study also informed that all the cycloaddition reactions proceed in a spontaneous and exergonic fashion.     

Synthesis and intramolecular nitrile oxide cycloaddition of 3,5'-ether-linked pseudooligosaccharide derivatives: an approach to chiral macrooxacycles

3,5'-ether-linked pseudooligopentose derivatives were synthesized for the first time from readily available carbohydrate precursors. The 1,2-isopropylidene-protected ether-linked oligopentoses are potentially important as precursors of novel RNA analogues. Intramolecular cycloaddition of the nitrile oxides prepared from these derivatives led to the diastereoselective formation of chiral isoxazolines fused to 10-16-membered oxacycles. The stereochemistry of some of these isoxazolines was established by X-ray diffraction and NOESY analysis.     

Stereoselective synthesis of alpha- and beta-glycosylamide derivatives from glycopyranosyl azides via isoxazoline intermediates

Treatment of 2-acetoxy glycopyranosyl azides with Ph3P gave isoxazolines by ring closure of the phosphorimine. Coupling of in situ generated isoxazolines with acylating reagents gave mixtures of alpha- or beta-glycopyranosyl amides. The alpha/beta ratio depended upon the acylating reagent and metal salts employed. For example, coupling of isoxazoline 3 with Z-Asp-(SPy)-OBn in the presence of CuCl2 gave exclusively alpha-N-glucopyranosylasparagine derivative 8. This general procedure has been applied to mono-, di-, and trisaccharide systems.     

Solid Phase Synthesis of Isoxazole and Isoxazoline-carboxamides via [2+3]-Dipolar Cycloaddition Using Resin-bound Alkynes or Alkenes

An efficient approach for the parallel solid phase synthesis of isoxazole and isoxazoline derivatives has been developed. The isoxazoles and isoxazolines were constructed through a 1,3-dipolar cycloaddition reaction of nitrile oxides, with resin-bound alkynes or alkenes. The cycloaddition reaction conditions performed on solid phase supports was optimized, and an array of resin bound carboxylic acid building blocks were utilized for distinct conversions. This methodology presents a new alternative to the diversity oriented synthesis of disubstituted isoxazoles and isoxazolines different from existing routes which are limited in structural diversity.     

Intramolecular 1,3-dipolar cycloaddition of cyclo-1,3-diene-tethered nitrile oxides

Intramolecular 1,3-dipolar cycloaddition of cyclo-1,3-diene- and -1,3,5-triene-tethered nitrile oxides gave tricyclic isoxazolines as a single stereoisomer in most cases. The relative stereochemistry of tricycle-fused isoxazolines resulting from 1,3-dipolar cycloaddition of cyclo-1,3-diene-tethered nitrile oxides is cis-cis, whereas from cyclohepta-1,3,5-triene-tethered nitrile oxides the cis-trans isomer predominates.