甲基绿－萃取光度法测定锑

本文用Ｃｅ（ＳＯ＿４）＿２作氧化剂，在６ｍｏｌ／Ｌ　ＨＣｌ溶液中将Ｓｂ（Ⅲ）氧化为Ｓｂ（Ⅴ），过量的氧化剂用盐酸羟胺还原，生成的［ＳｂＣｌ＿６］￣－与甲基绿形成离子缔合物，在２ｍｏｌ／ＬＨＣｌ溶液中被ＣＨＣｌ＿３萃取。Ｔｌ、Ｉｎ、Ｇａ、Ａｕ等２０种离子共存时不干扰测定，用于金属镉及废水中测定微量锑，结果满意。     

供应商不确定情景下药品物流多中心选址优化研究

根据国家4+7药品带量集中采购评审标准,基于药品生产企业生产质量、供应能力、相关资质和同类药品参标结果等数据进行梳理和分析,针对药品供应商不确定情景下药品物流多中心选址问题,构建药品物流整体费用最优的多中心选址模型,设计多阶段改进禁忌搜索算法,最后通过4+7带量集中采购具体算例对模型和算法进行验证,结果显示该模型和算法是可行和有效的。     

药品物流多中心选址优化研究

为降低药品物流配送成本、提高药品配送效率。本文针对国家带量集中采购药品配送问题,构建了药品物流多中心选址-路径优化双目标模型。并结合模糊C-均值聚类算法(FCMA)、模拟退火算法和禁忌搜索算法各自优点,设计出了FCM-TS-SA混合算法,最后通过真实案例进行了验证、对比和分析。     

常规投资项目的外部收益率研究

揭示了常规投资项目外部收益率的实质 ,明确了常规投资项目外部收益率的缺陷 .研究表明 ,在实际工作中 ,不宜用外部收益率替代内部收益率进行常规投资项目的经济性分析评价     

Development of a China test cryomodule for ILC

Research and development of a 1.3 GHz 9-cell cavity test cryomodule were carried out by a collaboration group between IHEP (Institute of High Energy Physics) and TIPC (Technical Institute of Physics and Chemistry) in China. The cryomodule is a "test model" for the ILC cryomodule, and a key component of a superconducting accelerator test unit which will be built in the near future, also can be used as a horizontal test facility for 1.3~GHz 9-cell cavities. This paper presents the development status of the cryomodule, including structure design, cryogenic flow diagram, thermal and mechanical simulations, heat load estimation and etc.     

Optimization on Synchrotron Radiation Lattice of BEPCII

The Beijing Electron and Positron Collider II （BEPCII） is a double ring electron positron collider, which can also be used as a synchrotron radiation （SR） light source. Since the BEPCII will start commissioning with SR mode in November 2006, it is essential to have a satisfying SR lattice. Here we first perform frequency map analysis on the original BEPCII SR lattice. The result shows that the resonance is really severe in the lattice and the transverse motion of particles is unstable. Then a new SR lattice is designed to obtain a large dynamic aperture and much more stable transverse motion. The dynamic aperture of the new lattice including nonlinear wiggler effect is calculated to be very good. This new SR lattice can be used in the commissioning stage of the BEPCII.     

用大孔氨甲基聚苯乙烯树脂选择性吸附分离茶多酚和咖啡因

3种市售树脂ADS-5、ADS-8和ADS-17对茶多酚和咖啡因的混合物水溶液的吸附表明,具有弱极性的ADS-8对茶多酚的吸附量最大.随着树脂极性的增加(ADS-5＜ADS-8＜ADS-17),从混合物中对茶多酚的选择性吸附作用增加,表明对茶多酚的吸附可能包含疏水作用和氢键,而对咖啡因的吸附为疏水作用.在此基础上,合成了不同交联度(8%～26%DVB)的大孔氨甲基聚苯乙烯树脂,这些树脂具有疏水基质和可与酚类化合物形成较强氢键的氨基.对茶多酚和咖啡因的混合物溶液的吸附表明,这些树脂对茶多酚具有高吸附量和高吸附选择性.交联度为10%的大孔氨甲基聚苯乙烯树脂对茶多酚具有最大的吸附量,交联度为22%的大孔氨甲基聚苯乙烯树脂对茶多酚具有最大的吸附选择性.     

A Code for Bunch Lengthening Simulation

Bunch lengthening phenomenon is resulted from one of the most severe single bunch instabilities in storage rings. We develop a new code to calculate the single bunch length and energy spread in storage rings using FORTRAN. In this code, wake field is calculated using an analytical formula, which is different from the previous ones. The bunch length and energy spread under different bunch currents are calculated for BEPCII by using this code, and the tracking results are in good agreement with those from other codes. The calculated energy spread clearly shows that the longitudinal microwave instability threshold is around 65 mA for BEPCII storage ring.     

Study of lower emittance dedicated synchrotron radiation mode for the BEPCⅡ

In this paper,a dedicated synchrotron radiation （SR） mode for the BEPCⅡ with an emittance of 85 nm has been designed,including the linear lattice,chromaticity correction and dynamic aperture optimization.The emittance of the new mode is about 60% of the previous mode used for routine operation of the BEPCⅡ .The effect of wigglers on the linear lattice was compensated and the total dynamic aperture including the wigglers’ nonlinear effect was estimated.The preliminary commissioning at the end of 2008 and the formal operation with the new mode confirmed its merits.     

On the theory of photocathode rf guns

In this paper we give a set of analytical formulae to describe the characteristics of photocathode rf guns at any rf frequencies, such as energy, energy spread, bunch length, out going current, and emittance etc. as functions of the laser injection phase, which are useful in the design and practical operation of rf guns.