光纤环形外腔半导体激光器频偏特性研究

本文给出了在环形光纤外腔光反馈之下半导体激光器频偏特性的小信号分析理论.分析表明,尤其在千兆赫以下的调制频段中,耦合腔相移、内外腔光耦合强度及内外腔光场相位失谐对频偏功率比均有显著影响.可望用作强度调制直接检测高速率、长距离光纤通信系统中的光源.     

UNIFORM GROOVE-DEPTH RAC BY USING TRANSDUCER WEIGHTING

A new weighting method,transducer weighting.for the uniform groove-deph RAC is proposed in thispaper.The weighted input and output transducersform a weighting transversal filter In addition,the groove-width weighting,which can be used as an auxiliary is also discussed. By using the new methods,two uniform groove depth RACs have been designed and fabricated,Thesidelobe suppressions achieved are 31 dB and 32 dB.respectively.The results are considered satisfactorybecause the phase compensation by metal strip was not applied.     

Ronchi光栅光密度的一种测试方法

本文提出利用衍射光栅的反射特性,在自光图像处理系统中对光栅进行实时无损伤检验.这种方法灵敏度高、简便易行,有较高的实用价值.理论与实验结果一致.     

基于半解析法的钢绞线丝间摩擦学性能研究

为探究钢绞线丝间摩擦学性能，考虑钢绞线丝间摩擦接触和往复滑动行为等因素，基于曲杆理论、Archard磨损理论等，建立了周期弯曲钢绞线丝间摩擦学性能求解模型，采用半解析法实现快速求解，并通过与曲杆理论、有限元仿真结果对比以及磨损试验验证模型有效性，进而研究钢绞线丝间磨损深度、摩擦接触滑移等摩擦学性能参数的分布规律，分析载荷幅值、几何结构以及材料属性等对其丝间摩擦学性能的影响.结果表明：钢绞线丝间磨损发生在弯曲中性层外侧，钢丝未接触或接触但未发生滑移之处不发生磨损；弯曲载荷越大，磨损越严重；侧丝半径、捻角越大，丝间接触压力与接触变形均增大，故而磨损加剧；总磨损深度随钢绞线材料的弹性模量和泊松比增大而增大.     

3A分辨率绿豆胰蛋白酶抑制剂Lys活力碎片—牛胰蛋白酶(MBILF-BTRY)复合物的晶体结构分析和分子模型

用分子置换法成功地解得了MBILF-BTRY的晶体结构,并得到了它的立体结构模型。绿豆胰蛋白酶抑制剂属于絲氨酸蛋白酶抑制剂中结构最复杂的Bowman-Birk型抑制剂。这一类型抑制剂的立体结构以前尚未见报道。MBILF-BTRY复合物晶体的晶胞参数为a=62.99,b=63.54,c=69.70,α=β=γ=90°,空间群为P2_12_12_1,复合物分子量约为27500daltons。用理学电机的Ru-300型转靶X光机及AFC-5型四园衍射仪收集了分辨率为3范围内的独立衍射点5142个。以蛋白质数据库所取得的牛胰蛋白酶分子的座标为     

“强光一号”等离子体开关及负载稳定性分析

"强光一号"等离子体断路开关(POS)及负载二极管系统工作性能不够稳定,通过分析数据指出POS等离子体源参数差异性是导致系统不稳定的主要原因。POS等离子体源参数重复性测量结果表明,在开关断路时刻等离子体源瞬时发射等离子体密度重复性极差在10%左右,而开关区间累积等离子体密度极差超过100%。开关区间累积等离子体密度和阴极重粒子发射会对POS断路性能产生显著影响。计算表明开关区间累积等离子体密度差异对POS断路电流阈值影响达到200kA,与运行数据统计结果一致;在断路电流阈值相同的条件下,阴极物质逸出对二极管电压影响显著,MCNP程序计算结果表明,产生辐射剂量差别可以达到80%,与统计数据相当。     

两个新的4-羧基苯氧乙酸铜配合物的水热合成

由于CPOA^2-和HCPOA^-阴离子在反应体系中存在平衡关系，氯化铜与4-羧基苯氧乙酸和4,4¢-联吡啶在水热条件下反应得到了两个新的配位聚合物[Cu(CPOA)(4,4′-bpy)(H₂O)₂]·1.5H₂O (1) 和 [Cu₂(HCPOA)₄(4,4′-bpy)₄] (2) (H₂CPOA=4-羧基苯氧乙酸, 4,4′-bpy=4,4¢-联吡啶) 。研究结果表明配合物1具有三重穿插的CdSO₄-型网络结构，同时形成一维孔道，晶格水分子填充在孔道中。配合物2具有由配位键和O-H···N氢键组装形成的一维梯形链状结构。     

Four-State Model for Three-Branch Molecule＇s Two-Photon Absorption Properties

We present a four-state model for calculating the two-photon absorption of multi-branched molecules by using the time-depended function method, The numerical results indicate that the two-photon absorption cross section has a strong enhancement for three-branch molecules compared to two-branch structures, The maximal two-photon-absorption cross section is 2.358 × 10^-47 cm^4s/photon, At the same time, the charge-transfer process for the charge-transfer states is visualized in order to explain mechanism about the maximal TPA cross section.     

Effects of Substrate Temperature on Helium Content and Microstructure of Nanocrystalline Titanium Films

Helium-charged nanocrystalline titanium films have been deposited by HeAr magnetron co-sputtering. The effects of substrate temperature on the helium content and microstructure of the nanocrystalline titanium films have been studied. The results indicate that helium atoms with a high concentration are evenly incorporated in the deposited titanium films. When the substrate temperature increases from 60℃ to 350℃ while the other deposition＇parameters are fixed, the helium content decreases gradually from 38.6 at.% to 9.2at.%, which proves that nanocrystalline Ti films have a great helium storage capacity. The 20 angle of the Bragg peak of （002） crystal planes of the He-charged Ti film shifts to a lower angle and that of （100） crystal plane is unchanged as compared with that of the pure Ti film, which indicates that the lattice parameter c increases and a keeps at the primitive value. The grain refining and helium damage result in the diffraction peak broadening.     

2-硫代丁基-5-巯基-1，3，4-噻二唑Ag[I]修饰的钼硅酸盐纳米颗粒的制备及摩擦性能

以合成的2-硫代丁基-5-巯基-1，3，4-噻二唑为配体，在醇-水体系中制备了Keggin结构钼硅杂多阴离子有机衍生物的纳米颗粒，以透射电子显微镜、扫描电子显微镜、傅立叶变换红外光谱仪、热分析仪等测试手段对此纳米颗粒的形貌、组成和结构进行了表征，并在机械式四球长时抗磨损试验机上考察了其摩擦学性能．分散型实验结果表明化合物在有机溶剂中分散性能良好，红外光谱表明所合成的纳米颗粒具有杂多酸Keggin骨架结构无机核，透射电镜分析表明颗粒平均粒径约为10nm，热分析娃示分解温度范围为200～300℃．作为新型纳米润滑油添加剂，在最佳添加质量分数为0．05％，负荷300N，摩擦时间30min，转速1450r／min的条件下，与空白相比磨斑直径减小27．9％，摩擦系数减小15．3％．