FTO客体3m闪光照相的Monte Carlo研究

 研究了客体模型FTO的闪光照相系统X光输运过程，给出了直穿照射量、散射照射量、直散比、直穿照射量能谱、散射照射量能谱、直穿X光通量能谱和散射X光通量能谱在记录平面的空间分布。结果表明：后锥是照射量散射成分的主要来源，后锥照射量占总散射量97%；后锥也是造成散射的空间分布不均匀的主要器件，这一不均匀性高达58%。照相系统的最小直散比非常小，表明锥造成的散射已经严重地淹没了直穿（轫致辐射）信号。计算中使用高空间分辨率记录法进行分点，合成图像对吸收系数的复原结果与国外报道的结果相符。     

利用数值模拟测量闪光照相中的H-D曲线

H-D曲线表明了照射量与底片光学密度之间的关系，是定量提取客体信息的基础。尽管实验上提出了许多测量“屏-片”的H—D曲线的方法，但这些方法所采用的实验布局与实际照相环境存在一定的差异。第一，许多实验采用的光源是单能源（如^60Co），没有体现底片系统对不同X射线能量的响应特性；第二，实验装置与实际照相模型存在比较大的差异，由于光子能谱和角分布以及散射的影响，测量的H-D曲线往往很难用到实际照相中；第三，也是更重要的一点是目前测量高能X射线照射量的仪器的测量误差较大，     

Steady state speed distribution analysis for a combined cellular automaton traffic model

Cellular Automaton （CA） based traffic flow models have been extensively studied due to their effectiveness and simplicity in recent years. This paper develops a discrete time Markov chain （DTMC） analytical framework for a Nagel-Schreckenberg and Fukui Ishibashi combined CA model （W^2H traffic flow model） from microscopic point of view to capture the macroscopic steady state speed distributions. The inter-vehicle spacing Maxkov chain and the steady state speed Markov chain are proved to be irreducible and ergodic. The theoretical speed probability distributions depending on the traffic density and stochastic delay probability are in good accordance with numerical simulations. The derived fundamental diagram of the average speed from theoretical speed distributions is equivalent to the results in the previous work.     

闪光照相系统的散射分布与降散射的数值模拟

 对法国试验客体（FTO）的3 m照相系统建模，利用Monte-Carlo方法模拟X光子输运过程，得到了系统的散射分布和系统器件对散射的贡献。结果表明：后保护锥是系统散射的主要来源，对于任意一点，后保护锥的散射占总散射的75%以上。FTO的散射主要是FTO外层材料和边缘的散射，这部分散射占客体总散射的90%以上。利用坡度准直器对系统散射严重的区域进行的降散射，表明坡度准直器是一个很好的降散射器件，能有效提高图像质量。     

稀疏张量约束的低剂量CT图像重建

提出了一种稀疏张量约束重建算法,该方法利用非局部相似的先验信息,将CT图像分割成一系列图像块组;采用张量的多维低秩分解方法,将这一先验信息引入低剂量CT重建中,构造目标函数;通过重建图像更新和图像块组张量稀疏编码两个步骤,交替迭代求解目标函数。基于仿真数据和临床数据的实验结果验证了该算法的有效性,实验结果表明:与经典重建算法相比,所提算法在抑制噪声的同时,能更好地保持重建图像的细节,获得更高质量的图像。     

相干衍射成像的相位复原及重建

相干衍射成像是一种对材料体密度敏感的超高分辨成像技术。相较于传统表面敏感的超高分辨成像技术,相干衍射成像利用了硬X射线的强穿透能力,可以深入材料体内部进行成像,且成像分辨能力可以根据成像布局进行调整,最高达到原子级空间分辨能力。这种灵活的空间分辨调整依赖于相干衍射成像独特的相位复原技术,即通过对图像成像强度的过采样,利用含约束的迭代算法同时获得光场的强度及相位,进而对样品进行重建;同时结合图像定向及组合技术,相干衍射成像可以实现对样品的三维重建。本文主要从成像原理、复原算法和重建方法介绍相干衍射成像技术,并结合实验进展及模拟研究展示该技术在多种重建情形下具备的诊断能力,以期较为全面地给出相干衍射成像技术的发展趋势。     

In-Situ Characterization of Three-Dimensional Optical Matters by Light Diffraction

Three-dimensional optical matters are created by combining the single beam optical trapping with the conventional Z-scan technique. Dynamic light diffraction is employed to evaluate the structure and quality of the optical matter formed at the optimum trapping power. The lattice constant of the optical matter is extracted based on the Bragg and Snell laws, showing that polystyrene spheres are nearly close-packed in the optical matter, confirmed by comparing the diffraction pattern of the optical matter with that of a colloidal photonic crystal fabricated by the self-assembled technique. The relatively broad diffraction peaks observed in the optical matter indicate that the density of disorders in it is higher than that in the photonic crystal. It is suggested that the optical matter possesses a random close-packed structure rather than a face centered cubic one.Three-dimensional optical matters are created by combining the single beam optical trapping with the conven- tional Z-scan technique. Dynamic light diffraction is employed to evaluate the structure and quality of the optical matter formed at the optimum trapping power. The lattice constant of the optical matter is extracted based on the Bragg and Snell laws, showing that polystyrene spheres are nearly close-packed in the optical matter, confirmed by comparing the diffraction pattern of the optical matter with that of a colloidal photonic crystal fabricated by the self-assembled technique. The relatively broad diffraction peaks observed in the optical matter indicate that the density of disorders in it is higher than that in the photonic crystal. It is suggested that the optical matter possesses a random close-packed structure rather than a face centered cubic one.     

不同准直角双轴闪光照相

 为了降低闪光照相中散射的影响和提高法国试验客体（French test object,FTO）重建的精度,结合不同准直角下散射不同的特性,提出了不同准直角的双轴闪光照相布局,并进行了相应的数值模拟实验。研究结果表明：不同准直角双轴闪光照相中散射的相互干扰非常严重,且主要来于前保护器件,需使用铅板屏蔽。根据信息融合特性和降低散射影响的要求确定了FTO不同准直角双轴闪光照相的两个准直角分别为2.24°和1.15°。从该不同准直角的双轴闪光照相系统模拟得到的图像重建出了均方根误差小于5.8%的密度分布,结果远优于单轴照相23％的均方根误差。     

闪光照相中散射分布均匀性的影响因素

 为了在客体密度重建过程中采用迭代法扣除散射X射线的影响,提出了以散射分布均匀为主要目的的闪光照相系统设计思想。在介绍散射分布均匀性定义的基础上,分析了均匀扣除散射所带来的光程差。采用蒙特卡罗方法研究了系统放大倍数、照相距离以及后防护锥到图像接收系统的距离对散射分布均匀性的影响。结果表明：后防护锥到图像接收系统的距离是影响散射分布形状和散射照射量大小的一个主要因素;当后防护锥到图像接收系统的距离为55 cm左右时,散射分布均匀性近似最佳,而且照相距离越大,散射分布均匀性越好。这些研究结果可用于实际闪光照相系统的优化设计,在图像接收系统的响应范围内达到使散射分布均匀和降低光源模糊影响的目的。     

Parameter allocation of parallel array bistable stochastic resonance and its application in communication systems

In this paper, we propose a parameter allocation scheme in a parallel array bistable stochastic resonance-based communication system(P-BSR-CS) to improve the performance of weak binary pulse amplitude modulated(BPAM) signal transmissions. The optimal parameter allocation policy of the P-BSR-CS is provided to minimize the bit error rate(BER)and maximize the channel capacity(CC) under the adiabatic approximation condition. On this basis, we further derive the best parameter selection theorem in realistic communication scenarios via variable transformation. Specifically, the P-BSR structure design not only brings the robustness of parameter selection optimization, where the optimal parameter pair is not fixed but variable in quite a wide range, but also produces outstanding system performance. Theoretical analysis and simulation results indicate that in the P-BSR-CS the proposed parameter allocation scheme yields considerable performance improvement, particularly in very low signal-to-noise ratio(SNR) environments.