g-C3N4-W18O49复合光催化剂的制备及其光催化机理研究

通过简单的溶剂热法成功制备出了g-C3N4-W18O49复合光催化剂,采用XRD、SEM、TEM以及PL对所得催化剂的物相结构及形貌和光学性能进行了表征,通过降解甲基橙和光解水产氢实验研究所得催化剂的催化性能及其催化机理.由实验可知,W18O49的含量为50;时所得g-C3N4-W18O49复合光催化剂的降解性能最好,其降解率比纯g-C3N4纳米片提高48;;为进一步研究复合光催化剂的电子-空穴传输机理,我们又进行了光解水制氢实验.结果表明:单一的W18O49无产氢活性,它的复合明显降低了g-C3N4的产氢速率,说明复合结构中光生电子是从g-C3N4传递到了W18O49,表现出明显的Ⅱ型异质结复合特征,而不是部分文献所提出的Z型方式.     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

高压辅助法制备红外非线性AgGaGe5Se12、AgGaGeS4晶体

AgGaGe5 Se12、AgGaGeS4非线性晶体在中远红外激光具有良好的应用前景.合成高纯多晶是制备可器件化单晶元件的关键.但S、Se易挥发、高温下饱和蒸气压高,易导致石英坩埚的爆炸,组分偏离化学计量比.为此,本文采用一种新型的高压辅助法合成出大尺寸高纯的多晶原料,解决了石英坩埚爆炸和组份偏离问题,并在此基础上进行了单晶的生长过程.多晶X射线粉末衍射测试结果与模拟图谱或者标准PDF卡片一致;X射线荧光光谱分析得到各元素百分含量非常接近化学计量比,AgGaGe5 Se12中Ag、Ga、Ge、Se各占7.86;、5.08;、23.80;、63.26;,AgGaGeS4中Ag、Ga、Ge、S各占28.22;、18.24;、19.52;、34.02;;单晶透过率测试得到AgGaGe5 Se12、AgGaGeS4透过率分别为60;、70;,证明此方法制备的AgGaGe5 Se12、AgGaGeS4晶体性能优良,展现了该方法在多晶合成的应用潜力.     

2,2联吡啶-5,5-二羧酸与稀土配合物的合成、结构及发光性能

利用2,2-联吡啶-5,5-二羧酸作为配体,采用水热法,合成了稀土配合物[Ln2(bpydc)3·2DMF]n(1,Ln=Eu,Tb;Hbpydc=2,2-联吡啶-5,5-二羧酸).单晶X射线测试表明Tb配合物与Eu配合物具有相同结构.配合物1·Tb属于三斜晶系,P-1空间群,晶胞参数为a=1.39657(2) nm,b=1.40874(1)nm,c=1.45241 (1) nm,α=90.887(1)°,β=115.261(1)°,γ=113.951(1)°,V=2.29931(5) nm3,Z=2;同时,配合物1·Tb具有新颖的三维结构,七个氧原子在稀土离子周围形成一个略微变形的单帽三棱柱配位环境.利用红外光谱、荧光光谱、磷光光谱对配合物进行了表征,结果表明:Eu(Ⅲ)与Tb(Ⅲ)配合物分别在612 nm与542 nm处有强烈的特征荧光发射;配体三重态能级(26178 cm-1)与Eu (Ⅲ)、Tb(Ⅲ)的最低激发态能级匹配,配合物具有优良的能量传递效率.     

PLA/EMAG共混物的制备与表征

通过熔融共混挤出法制备了不同乙烯-丙烯酸甲酯-甲基丙烯酸缩水甘油酯(EMAG)含量下的聚乳酸(PLA)/EMAG共混物,考察共混体系中EMAG与PLA基体之间的相互作用,研究了PLA/EMAG共混物的结晶性能、力学性能、熔体指数、加工性能以及热稳定性.表征结果显示:EMAG中的环氧基团与PLA的端羟基或端羧基发生化学反应,形成反应性共混体系,PLA/EMAG共混物的韧性较纯PLA有大幅提高,在EMAG含量为15;时达到最大.     

基于有序介孔碳的氯离子选择性电极的制备及其在手持传感系统中的应用

以有序介孔碳(OMC)球为离子-电子转换层,制备了固态氯离子选择性电极,构建了基于离子敏感的场效应晶体管(ISFET)的手持式传感系统,用于检测人体血清中的氯离子。优化了OMC前驱体的碳化温度,探究了OMC形貌结构对电极传感性能的影响;电极柔性化制备后考察了其在手持系统中对氯离子的检测效果。结果表明,最优条件下,电极在5.12×10^-4~1.02 mol/L的浓度范围呈现线性响应,响应斜率为60 mV/decade。该柔性电极在手持传感系统中展现出高灵敏度和重现性,可用于人体血清样品中氯离子的检测,其回收率为96.3%~104.9%。     

QEPAS系统中石英音叉模态仿真计算与研究

对石英音叉增强型光声光谱(QEPAS)系统中常用的石英音叉进行了有限元模态计算，获得石英音叉前6阶振型与模态频率，认知了第4阶对称摆动振型为有效振动，利用单因素法分析了石英音叉的音臂长度l₁、音臂宽度w₁、音臂厚度t、音臂切角θ、音臂圆孔直径d及音臂圆孔高度h对低阶有效共振频率(Fre)的影响，敏感度依次为： l₁> w₁>d>θ>t>h，考虑实际设计情形，筛选出了l₁，w₁，d与h四个石英音叉设计变量，采用Box-Behnken实验设计方案与RSM(response surface methodology)方法，以Fre为函数目标，建立l₁，w₁，d与h的二次回归响应面模型，得到了参数之间的交互作用，利用Design-Expert软件对响应面模型进行设计参数反求，结果表明，在15 000 Hz≤Fre≤25 000 Hz计算区域内误差较小，基本满足QEPAS系统的计算需求，所提出的研究与设计方法具有一定通用性，可为QEPAS系统中石英音叉结构参数设计提供参考。     

ZnO-PSAⅡ型异质结界面电荷转移过程研究

采用稳态光致发光光谱和纳秒时间分辨瞬态光谱(NTRT-PL)表征,揭示ZnO-PSA II型纳米异质结光生载流子电荷转移过程,通过甲基橙光降解实验,测得ZnO-NRs和ZnO-PSA紫外光降解率分别为25.5;和60.1;,光降解率提高到2.4倍,表明II型异质结相对于单一半导体而言,能促进光生载流子在界面间电荷转移,有利于载流子的分离.     

含分布时滞的时滞微分系统多步龙格-库塔方法的时滞相关稳定性

本文研究了一类含分布时滞的时滞微分系统的多步龙格-库塔方法的稳定性.基于辐角原理，本文给出了多步龙格-库塔方法弱时滞相关稳定性的充分条件，并通过数值算例验证了理论结果的有效性.