Unveiling the importance of reactant mass transfer in environmental catalysis: Taking catalytic chlorobenzene oxidation as an example

To date, investigations onto the regulation of reactants mass transfer has been paid much less attention in environmental catalysis. Herein, we demonstrated that by rationally designing the adsorption sites of multi-reactants, the pollutant destruction efficiency, product selectivity, reaction stability and secondary pollution have been all affected in the catalytic chlorobenzene oxidation (CBCO). Experimental results revealed that the co-adsorption of chlorobenzene (CB) and gaseous O₂ at the oxygen vacancies of CeO₂ led to remarkably high CO₂ generation, owning to their short mass transfer distance on the catalyst surface, while their separated adsorptions at Brönsted HZSM-5 and CeO₂ vacancies resulted in a much lower CO₂ generation, and produced significant polychlorinated byproducts in the off-gas. However, this separated adsorption model yielded superior long-term stability for the CeO₂/HZSM-5 catalyst, owning to the protection of CeO₂ oxygen vacancies from Cl poisoning by the preferential adsorption of CB on the Brönsted acidic sites. This work unveils that design of environmental catalysts needs to consider both of the catalyst intrinsic property and reactant mass transfer; investigations of the latter could pave a new way for the development of highly efficient catalysts towards environmental pollution control.     

Rapid identification of trimethyl and triethyl amines using sulphonic acidic ionic liquids: A time-of-flight secondary ion mass spectrometry study of fragmentation reactions

The time-of-flight secondary ion mass spectrometry (TOF-SIMS) has emerged as a powerful tool for the unswerving detection of biomolecules, in particular, proteins and peptides. To date, there is very little information available on the direct determination of trimethyl/triethyl amines using TOF-SIMS. One major hurdle in this regard is an ultrahigh vacuum system, usually needed in TOF-SIMS, which hampers its usability to trimethyl/triethyl amines owing to their high evaporation rate. We designed an efficient and sensitive protocol for rapid identification and sensitive determination of tertiaryalkyl amines using TOF-SIMS. The amines were derivatized by reaction with 1,4-butane sultone and sulphuric acid sequentially to afford the corresponding sulphonic acidic ionic liquids (ILs). The TOF-SIMS analysis of these task-specific ILs (TSILs) was carried out in both positive and negative polarity. The positive ion mass spectra of TSILs showed sharp fragmented peaks for tertiaryalkyl amines at typical level and up to 10 ppm. The possible mechanism for different fragmentation pathways in positive polarity was discussed.     

Surface modification of silica nanoparticles by a polyoxyethylene sorbitan and silane coupling agent to prepare high-performance rubber composites

The interfacial interaction between nano-silica and rubber matrix is very important for the preparation of high-performance rubber composites. In this paper, we first proposed the use of TWEEN-20 as a new silica modifier, it has four long arms consisting of three polyether chains with terminal hydroxyl group and a fatty chain. The oxygen on the polyether can form a hydrogen bond with the silanol groups on silica surface, and the terminal hydroxyl groups can chemically react with the silanol groups without any VOCs. Moreover, the long fatty chain can weaken silica polarity to obtain a better compatibility with rubber, so that silica modified by TWEEN-20 with chemical reaction and physical absorption can homogeneously disperses in rubber matrix. Nextly, we prepared high-performance natural rubber (NR) composites by adjusting the ratio of TWEEN-20 to TESPT to adjust the physical and chemical interaction between nano-silica and rubber molecular chains. The results indicated that the performances, including the filler dispersion, static mechanical properties, and dynamic heating (viscoelastic self-heating), were optimal when the ratio of TESPT to TWEEN-20 was 2:1. In addition, one-third of TESPT was replaced by TWEEN-20 to prepare silica/rubber composites, which can reduce one-third of VOCs, improve “scorchy”, and achieve high dispersion of silica.     

Studies of conventional sulfur vulcanization of SBR rubber: Analysing the reaction products from thermal degradation of the accelerator by means of MCC-IMS technique

A combination of knowledge on curing process of rubber mixes with novel methods of chemical analysis, a new unconventional approach to analysis of rubber vulcanization is presented in this study. Six SBR samples containing various N-tert-butyl-2-benzothiazole sulfenamide (TBBS) accelerator: sulfur ratios (within) the range of conventional (CV) sulfur vulcanization system were studied using multi-capillary column ion mobility spectrometry (MCC-IMS) technique. For these analysis, calibration/dilution curves were established. Moreover, data from MCC-IMS were correlated with other parameters of the rubber vulcanizates – their crosslink density and structure as well as their tensile strength and modulus at elongation. For such comparison, one of the reaction products from thermal decomposition of TBBS, benzothiazole was selected. Furthermore, the concentration of benzothiazole released during the vulcanization process corresponded well with the crosslink density of the rubber vulcanizates studied. It was even possible to calculate the crosslink density from the concentration of benzothiazole determined by MCC-IMS, using Boltzmann fitting curve. The presented results could be an important contribution in understanding the mechanisms occurring during rubber vulcanization, demonstrating a new approach to testing and evaluation of the process.     

二氧化硅气凝胶对挥发性有机污染物的吸附性能研究

以TEOS为前驱体,乙醇为溶剂,氢氟酸为催化剂,一步法合成了常规二氧化硅气凝胶。经乙醇超临界干燥后,通过SEM,FTIR和N2吸脱附分析仪等仪器对二氧化硅气凝胶样品进行表征,以更好地了解吸附机理与性质的关系。结果表明,样品的比表面积高达519 m2/g,孔体积为1.9 cm3/g,平均孔径为15.15 nm,是一种优良的吸附材料。制备的样品用作测试甲苯、对二甲苯和苯三种挥发性有机化合物的吸附效果。结果表明,二氧化硅气凝胶对三种污染物都具有很高的吸附量,其高吸附能力归因于气凝胶的三维纳米网络结构。样品对甲苯,对二甲苯和苯的最大吸附能力分别为1422.8 mg/g,707.4 mg/g和1299.4 mg/g。综上所述,二氧化硅气凝胶是一种很有前景的处理挥发性有机化合物的吸附剂,具有优异的吸附性能。     

Response surface optimisation applied to a headspace-solid phase microextraction-gas chromatography-mass spectrometry method for the analysis of volatile organic compounds in water matrices

A new method for the simultaneous determination of 12 volatile organic compounds (trans-1,2-dichloroethene, 1,1,1-trichloroethane, benzene, 1,2-dichloroethane, trichloroethene, toluene, 1,1,2-trichloroethane, tetrachloroethene, ethylbenzene, m-, p-, o-xylene) in water samples by headspace solid phase microextraction (HS–SPME)–gas chromatography mass spectrometry (GC–MS) was described, using a 100?µm PDMS (polydimethylsiloxane) coated fibre. The response surface methodology was used to optimise the effect of the extraction time and temperature, as well as the influence of the salt addition in the extraction process. Optimal conditions were extraction time and temperature of 30?min and ?20°C, respectively, and NaCl concentration of 4?mol?L^?1. The detection limits were in the range of 1.1?×?10^?3–2.3?µg?L^?1 for the 12 volatile organic compounds (VOCs). Global uncertainties were in the range of 4–68%, when concentrations decrease from 250?µg?L^?1 down to the limits of quantification. The method proved adequate to detect VOCs in six river samples.     

ESTIMATION OF ACTIVATED ENERGY OF DESORPTION OF n-HEXANE ON ACTIVATED CARBONS BY TPD TECHNIQUE

1. INTRODUCTION In some cities of China, cancer and breath system diseases caused by the pollution of volatile organic compounds (VOCs) have been obviously increasing. The VOCs includes BTEX (benzene, toluene, ethylbenzene, and xylene), aldehydes, cresol, phenol, acetic acid, polynuclear aromatic hydrocarbons (PAHs), which have long-term human health implications. Emission of the VOCs has threatened the health of people seriously [1,2]. The pollution of the VOCs mostly hails from…     

Chemotherapy control by breath profile with application of SPME‐GC/MS method

Chemotherapy used as a treatment against lung cancer has influence on metabolic processes occurring in healthy cells. The changes of biochemical pathways proceeded inside cells might be observed in expired air. In the experiment, breath analysis was carried out before and after anticancer therapy. Expired air samples were collected from 22 patients with a biopsy confirmed lung cancer. Volatile organic compounds present in breath were analyzed by gas chromatography/mass spectrometry. For enrichment of analytes solid‐phase microextraction technique was applied. Eight fibers covered by different sorbents were tested. Carboxen‐polydimethylsiloxane fiber revealed the highest extraction efficiency in relation to analytes in breath. The data showed that cytostatic drugs increase the concentration of acetone and isoprene in the breath collected after chemotherapy. Volatile metabolites of administrated drugs were not identified in expired air.     

多孔建材中VOC扩散系数的两尺度模型

基于对建材微观结构的分析和压汞实验,提出了预测建材中有机挥发物(VOC)扩散系数的宏观一介观两尺度模型.和传统的从压汞实验计算扩散系数方法不同的是,本模型不仅考虑了孔隙率,还对孔的尺度分布和孔的连接方式进行了研究和分析.三种不同中密度板中VOC的散发实验表明,采用新模型计算的扩散系数比文献中的传统模型更好地吻合实验数据.