One-pot assembling of selenazolines from elemental selenium,alkenes and acetonitrile

A new method for assembling 1,3-selenazolines by the iodine- mediated reaction of the simplest building blocks such as elemental selenium, alkenes and acetonitrile has been discovered. A proposed mechanism includes the addition of the intermediate selenium iodides to alkene with subsequent solvent interception by the formed seleniranium ion.     

Intramolecular Hydroamination of Selenoalkynes to 2-Selenylindoles in the Absence of Catalyst

In this work, a series of 2-chalcogenylindoles was synthesized by an efficient methodology, starting from chalcogenoalkynes, including a previously unreported tellurium indole derivative. For the first time, these 2-substituted chalcogenylindoles were obtained in the absence of metal catalyst or base, under thermal conditions only. In addition, the results described herein represent a methodology with inverse regioselectivity for the chalcogen functionalization of indoles.     

Synthesis and crystal structure of the octahedral cluster complex [Th(DMSO)8Cl][Re6Se7Cl7]

A cluster complex of the composition [Th(DMSO)₈Cl][Re₆Se₇Cl₇] has been obtained by interaction of ThCl₄ solution in DMSO with a water solution of K₃[Re₆Se₇Cl₇] and KCl. The compound crystallizes in the rhombic space group Pbcm with unit cell parameters a = 12.262(2) Å, b = 19.653(6) Å, c = 23.603(6) Å, V = 5688(2) ų, Z = 4, d _calc = 3.282 g/cm³. The structure is built from centrosymmetric cluster anions [Re₆Se₇Cl₇]^3? and complex cations [Th(DMSO)₈Cl]³⁺ possessing mirror-plane symmetry, half of the DMSO ligands being doubly disordered.     

Kinetic studies of antimony and selenium atomization processes including a chemical modifier during their determination by electrothermal atomic absorption spectrometry

We have studied antimony and selenium atomization processes including a chemical matrix modifier (palladium-containing activated carbon) during their determination by electrothermal atomic absorption spectrometry. We have developed and fine-tuned an experimental setup for determining the kinetic characteristics (activation energy and frequency factor) for element atomization processes from measurements in the initial section of the analytical signal. We provide a rationale for the most likely mechanism for the interactions that occur. The results of the kinetic studies of the atomization processes showed that the modifier we developed was highly effective, as a result of formation of a thermally stable condensed system C-Pd-A (where A is the analyte). __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 4, pp. 530–534, July–August, 2006.     

大米中硒的FI-HG-AAS测定方法研究

研究了原子化器温度、载气流速、KBH4 浓度等条件对流动注射 氢化物发生 原子吸收光谱法 (FI-HG -AAS)测定硒时的影响。建立了FI-HG -AAS测定大米中硒的分析方法。在优化的工作条件下 ,测定硒的最低检测浓度为 0 3 3 μg·L- 1,线性范围为 0～ 5 0 μg·L- 1,相对标准偏差小于 4% ,加标回收率为 94%～ 1 0 2 %。本法克服了传统的间断氢化物发生 原子吸收光谱法分析速度慢、样品耗量大、操作繁琐且因手工进样在进样速度和进样体积上容易带来误差等缺点。方法操作简便、快速 ,灵敏度及自动化程度高 ,已广泛应用于大米及富硒大米中微量硒的测定     

微乳液增敏光度法测定中草药中微量硒

研究了在非离子微乳液介质中,硫氰酸盐罗丹明B 明胶体系分光光度法测定微量硒的方法。实验表明,当微乳液组成为V(OP乳化剂) +V(正戊醇) +V(正庚烷) +V(水) =1 5 0 +0 1 1+0 41 +97 98时,体系的表观摩尔吸收系数达1 3 0 1×1 0 6 L·mol- 1·cm- 1,灵敏度比在OP溶液中有显著提高,使该法成为少有的超高灵敏度测定硒的光度法之一。Se (Ⅳ)含量在0～0 0 5 μg·mL- 1范围内符合比耳定律,对0 0 2 μg·mL- 1Se(Ⅳ)平行测定1 1次,测得相对标准偏差为0 945 %。应用于中草药中微量硒的测定结果令人满意     

豆腐生产过程中微量元素硒分布特性研究

为确定以不同硒含量的大豆为原料生产豆腐过程中硒分布特性,用石墨炉原子吸收分光光度法对该过程中各种产物的硒含量进行了分析研究。结果表明,以硒含量分别为0.692、2.561、2.801 mg/kg的大豆为原料生产得到的豆腐、黄浆水、豆渣的硒含量分别为:0.089、0.250、0.138 mg/kg,0.462、0.760、0.507 mg/kg和0.532、0.764、0.524 mg/kg。豆腐生产过程中,以低硒大豆为原料生产豆腐,硒总回收率为75.59%;采用富硒大豆为原料生产,硒的回收率分别达到87.37%、87.20%;生产过程中豆腐、黄浆水和豆渣中硒含量占总回收硒的比率分别为39.01%～49.97%、23.92%～29.89%、26.11%～30.92%。     

硒素营养对麦芽质量指标的影响

大麦在制麦过程中的溶解对麦芽质量、啤酒的酿造以及成品啤酒的质量有重要的影响。本文利用生物转化技术，以微量元素硒作为制麦添加剂，以提高麦芽质量。本实验中，浸麦采用第一次浸6h以下采用浸二断四的工艺，浸水时每小时换水一次，一直通风，当浸麦度达40％～42％时，用硒溶液处理1h。发芽前两天每天补水两次，后期促进其凋萎。焙燥过程中前期低温大风量排湿，中期合理稳步升温，后期严格控制焙焦温度，使整个过程稳定。测定制得的成品麦芽的糖化力、α-AN、无水浸出率、色度等质量指标。发现硒对麦芽的质量有一定的影响。     

典型钙/镁基吸附剂对二氧化硒吸附特性研究

针对钙/镁基矿物吸附剂的主要组分CaO、CaCO₃、MgO在500-800 ℃下对Se的吸附特性进行研究，并选取天然矿物方解石、白云石研究其对Se的吸附效果，且对矿物煅烧所得CaO进行吸附实验。结果表明，三种组分中CaO的吸附效果最佳，800 ℃时单位质量CaO对Se的吸附量可达368 mg/g。CaCO₃对Se的吸附在700 ℃时效果最佳且其吸附产物的热稳定性较好。镁基吸附剂仅在中温段对Se具有一定吸附效果。方解石对Se的吸附效果随温度变化趋势与CaCO₃相似，因其较好的孔隙结构，吸附效果略优于CaCO₃。煅烧方解石得到的F-sor对Se的吸附效果优于CaO和CaCO₃煅烧得到的C-sor，这与其良好的比表面积、孔隙结构与抗烧结能力有关，且F-sor吸附产物的热稳定性相对较好。F-sor对Se的吸附量最高可达403 mg/g。