Simultaneous quantification of atenolol and chlorthalidone in human plasma by ultra‐performance liquid chromatography–tandem mass spectrometry

A simple, sensitive and reproducible ultra‐performance liquid chromatography–tandem mass spectrometry method has been developed for the simultaneous determination of atenolol, a β‐adrenergic receptor‐blocker and chlorthalidone, a monosulfonamyl diuretic in human plasma, using atenolol‐d7 and chlorthalidone‐d4 as the internal standards (ISs). Following solid‐phase extraction on Phenomenex Strata‐X cartridges using 100 μL human plasma sample, the analytes and ISs were separated on an Acquity UPLC BEH C₁₈ (50 mm × 2.1 mm, 1.7 µm) column using a mobile phase consisting of 0.1% formic acid–acetonitrile (25:75, v/v). A tandem mass spectrometer equipped with electrospray ionization was used as a detector in the positive ionization mode for both analytes. The linear concentration range was established as 0.50–500 ng/mL for atenolol and 0.25–150 ng/mL for chlorthalidone. Extraction recoveries were within 95–103% and ion suppression/enhancement, expressed as IS‐normalized matrix factors, ranged from 0.95 to 1.06 for both the analytes. Intra‐batch and inter‐batch precision (CV) and accuracy values were 2.37–5.91 and 96.1–103.2%, respectively. Stability of analytes in plasma was evaluated under different conditions, such as bench‐top, freeze–thaw, dry and wet extract and long‐term. The developed method was superior to the existing methods for the simultaneous determination of atenolol and chlorthalidone in human plasma with respect to the sensitivity, chromatographic analysis time and plasma volume for processing. Further, it was successfully applied to support a bioequivalence study of 50 mg atenolol + 12.5 mg chlorthalidone in 28 healthy Indian subjects. Copyright © 2015 John Wiley & Sons, Ltd.     

Sweet like chocolate

A new crystalline form of αβ‐d ‐lactose prepared by oven drying a concentrated aqueous solution of d ‐lactose is a lesson in the power of observation and the rigorous analysis of powder samples.     

Preparation of a novel infrared low-emissive coating from the Cu powder modified by the polyethylene wax

Cu powder was coated with polyethylene wax via the flux-capping method in hope to avoid the oxidation of it, so the increment of the infrared emissivity of the coating can be greatly reduced. The prepared product was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The infrared emissivity of the prepared material was measured by Infrared Emissometer. The influence parameters that will affect the emissivity of the coating were systematically investigated, such as the content of coated Cu powder, coating fineness, coating thickness and aging process. The results indicated that the infrared emissivity value of the coating was reduced after Cu powder was coated with polyethylene wax. The polyethylene wax/Cu composites presented a homogenous sheet structure when the content of Cu powder increased to 30 wt.%, and it has a lower emissivity. The infrared emissivity of the coating increases rapidly as thickness increases and becomes steady above thickness of 70 μm. The composite coating exhibits lower emissivity value and excellent physical properties at coated Cu content of 20 wt.%. The emissivity of the coating that was prepared from the modification of the Cu powder was decreased with the decrement of the grinding fineness and increased with the aging time. The emissivity of the coating that was prepared from the modification of the Cu powder is always lower than that of the coating that only composed of the Cu powder with the increment of the aging time. Therefore, it can be concluded that the anti-oxidation of Cu powder is greatly improved after it was modified by polyethylene wax, which results in a novel coating with long-run low emissivity.     

Monoclinic β-Li2TiO3: Neutron diffraction study and estimation of Li diffusion pathways

A neutron powder diffraction study on lithium titanate Li₂TiO₃ was performed at low temperatures. The monoclinic β-phase has been found to be stable over the whole investigated range of temperatures (4 K–300 K). A smooth and nonlinear increase of the lattice parameters has been observed upon heating and correlated to the behavior of interatomic distances. Lithium diffusion pathways in Li₂TiO₃ were estimated theoretically on the basis of the obtained structural data using bond-valence modeling. Experimentally diffusion pathways were evaluated by analysis of the negative nuclear scattering densities at 1073 K, which were reconstructed using a maximum entropy method. Although the bond-valence mismatch map indicated a possible Li diffusion either in ab plane or along c direction, analysis of the experimental data revealed that Li migration is thermodynamically less feasible in latter case.     

A novel method for making ultra-fine metal fibers and particles

A novel method based on plastic processing and equipment for preparing ultra-fine metal fibers and particles is reported. With this new method, metal fibers and particles can both be produced on the same equipment and the surfaces of the fibers and particles can be protected from oxidation by the polymers or solvents during the preparation process. Metal-alloy powders with lower melt point were filled into polymer by an extruder, followed by a die-drawing process at a temperature lower than the melt temperature of the metal alloy. Metal fibers or particles were obtained after the polymer matrix was washed away. Metal alloy fibers can be obtained when a polymer that strongly interacts with metal alloy, such as a special polyvinyl alcohol with a low alcoholysis degree, is used as the polymer matrix. Metal-alloy particles can be obtained when a polymer with weak interaction with metal alloy, such as polyethylene (PE), is used as the polymer matrix. Based on the principle of this new method, it is possible to produce finer or even nano-sized metal fibers and particles with higher melting points.     

以尿素为氮源合成AlN粉体过程中非晶碳的石墨化

针对有机合成过程中碳及碳化物的残余,传统方法中普遍使用除碳的工艺,而很少有文章针对非晶碳的结构和形貌进行表征。为此,本文采用高尿素含量的前驱盐体系,通过在氮气保护气氛中煅烧获得AlN粉体。采用X射线衍射分析、红外和拉曼光谱分析、扫描电子显微镜和透射电子显微镜对850~1 500 ℃温度范围内煅烧获得产物的结构和形貌进行表征,对AlN合成过程中含碳产物结构形貌的变化,以及AlN和含碳产物之间相互的依存生长关系进行分析。结果表明,AlN生长的过程中伴随着无定形碳的石墨化转变,AlN颗粒的形貌也受含碳残余产物形貌的影响而出现有规律的变化。     

功能化离子液体液化木粉及其酚醛复合材料

合成了氯代1-(2-羟乙基)-3-甲基咪唑离子液体[He MIM]Cl、溴代1-乙胺基-3-甲基咪唑离子液体[Ae MIM]Br和氯代1-羧乙基-3-甲基咪唑离子液体[Ce MIM]Cl 3种功能化咪唑离子液体,并分别进行了红外与氢核磁结构表征.然后用3种离子液体液化木粉,液化3 h后向体系直接加入苯酚、甲醛和氢氧化钠,制备酚醛复合材料,并采用FTIR、XRD、DSC和SEM对酚醛复合材料进行结构、性能与形貌测试,研究离子液体种类对木粉液化率及酚醛树脂性能的影响.结果表明,离子液体及其液化木粉产物制备的酚醛复合材料性能得到明显改善.[Ce MIM]Cl液化效果最好,90℃液化率高达24.6%,当[Ce MIM]Cl与木粉质量比为10∶1时,制备的酚醛复合材料的游离醛释放量由原来的3.64%降低到0.92%.离子液体[Ae MIM]Br能将酚醛复合材料的冲击强度由原来的0.93 k J/m2提高到6.96 k J/m2,而[Ae MIM]Br及其液化的木粉产物制备的酚醛复合材料拉伸强度从原来的3.28 MPa提高到9.70 MPa.     

Rapid and sensitive ultra‐high‐pressure liquid chromatography method for quantification of antichagasic benznidazole in plasma: application in a preclinical pharmacokinetic study

Benznidazole (BNZ) and nifurtimox are the only drugs available for treating Chagas disease. In this work, we validated a bioanalytical method for the quantification of BNZ in plasma aimed at improving sensitivity and time of analysis compared with the assays already published. Furthermore, we demonstrated the application of the method in a preclinical pharmacokinetic study after administration of a single oral dose of BNZ in Wistar rats. A Waters® Acquity UHPLC system equipped with a UV–vis detector was employed. The method was established using an Acquity® UHPLC HSS SB C₁₈ protected by an Acquity® UHPLC HSS SB C₁₈ VanGuard guard column and detection at 324 nm_. The mobile phase consisted of ultrapure water–acetonitrile (65:35), and elution was isocratic. The mobile phase flow rate was 0.55 mL/min, the volume of injection was 1 μL, and the run time was just 2 min. The samples were kept at 25°C until injection and the column at 45°C for the chromatographic separation. The sample preparation was performed by a rapid protein precipitation with acetonitrile. The linear concentration range was 0.15–20 µg/mL. The pharmacokinetic parameters of BNZ in rats were determined and the method was considered sensitive, fast and suitable for application in pharmacokinetic studies. Copyright © 2014 John Wiley & Sons, Ltd.     

Structural transformation from shish‐kebab crystals to micro‐fibrils through hot stretching process of gel‐spun ultra‐high molecular weight polyethylene fibers with high concentration solution

Structural evolution of gel‐spun ultra‐high molecular weight polyethylene fibers with high concentration solution via hot stretching process was investigated by in situ small‐angle X‐ray scattering, in situ wide‐angle X‐ray diffraction measurements, scanning electron microscopy, and differential scanning calorimetry. With the increase of stretching strain, the long period continuously increases at relative lower stretching temperature, while it first increases and then decreases rapidly at relative higher stretching temperature. The kebab thickness almost keeps constant during the whole hot‐stretching process and the kebab diameter continually decreases for all stretching temperatures. Moreover, the length of shish decreases slightly and the shish quantity increases although there is almost no change in the diameter of shish crystals during the hot stretching process. The degree of crystal orientation at different temperatures is as high as above 0.9 during the whole stretching process. These results indicate that the shish‐kebab crystals in ultra‐high molecular weight polyethylene fibers can transform continuously into the micro‐fibril structure composed mostly of shish crystals through the hot stretching process. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 225–238     

Disordered kalsilite KAlSiO4

The X‐ray powder diffraction pattern that corresponds to the disordered state of kalsilite (potassium aluminium orthosilicate), KAlSiO₄, is investigated. The directionality of (Al,Si)O₄ tetrahedra within single six‐membered tetrahedral ring building units (S6R) could not be defined. With equal probability for the directionality of each tetrahedra within one S6R [free apex pointing up (U) or down (D)], an undefined sequence of U and D directionalities is needed to describe the S6R building units. The extinction conditions of disordered kalsilite are also different compared to ordered kalsilite within the space group P6₃. In disordered kalsilite, h0l and hhl reflections with l = 2n + 1 are systematically absent.