Laser welding of thin foil nickel-titanium shape memory alloy

In this study, two L27 Taguchi experiments were carried out to study the effect of fibre laser welding parameters and their interactions upon the weld bead aspect ratio of nickel-titanium thin foil. The optimum parameters to produce full penetrated weld with the largest aspect ratio and desirable microstructure were successfully obtained by the Taguchi experimental design. The corrosion property of the optimized NiTi weld in Hank’s solution at 37.5 °C was studied and compared with the as-received NiTi. To improve the corrosion properties of the weld, the effect of post-weld-heat-treatments ranging from 573 to 1173 K was investigated. The corrosion properties, surface morphology, microstructure and Ti/Ni ratio of the heat-treated NiTi weld were analysed. It was found that a post-weld heat treatment at 573 K for 1 h provided the best pitting corrosion resistance at the weld zone.     

利用高压热处理技术提高Bi-2223/Ag高温超导带材临界电流

提高临界电流密度(Jc)对促进Bi-2223/Ag高温超导带材的应用有着重要意义.在常压热处理条件下所制备的带材中存在大量的裂纹、孔洞和第二相颗粒等,这些因素都会对带材的超导连接性能产生破坏作用.我们成功建立了一套可用氧气氛的热等静压设备,工作气压和温度可同时达到15MPa和850°C.通过引入裂纹愈合热处理过程,我们成功对带材进行了高压热处理,所得样品中第二相颗粒和裂纹数量大幅度降低,77K、自场下的临界电流相比常压热处理样品提高了20%左右.     

Superconducting state parameters of La<Subscript>100-<Emphasis Type="Italic">C</Emphasis></Subscript>Ga<Subscript><Emphasis Type="Italic">C</Emphasis></Subscript> binary metallic glasses

The theoretical investigations of the superconducting state parameters (SSP) viz. electron-phonon coupling strength λ, Coulomb pseudopotential μ*, transition temperature T _C , isotope effect exponent α and effective interaction strength N _O V of six binary La_100-C Ga _C (C = 16, 20, 22, 24, 26 and 28 at. %) metallic glasses have been reported using Ashcroft’s empty core (EMC) model potential for the first time. Five local field correction functions proposed by Hartree (H), Taylor (T), Ichimaru-Utsumi (IU), Farid et al. (F) and Sarkar et al. (S) are used in the present investigation to study the screening influence on the aforesaid properties. It is observed that the electron-phonon coupling strength λ and the transition temperature T _C are quite sensitive to the selection of the local field correction functions, whereas the Coulomb pseudopotential μ*, isotope effect exponent α and effective interaction strength N _O V show weak dependences on the local field correction functions. The T _C obtained from H-local field correction function are found in qualitative agreement with available experimental data and show almost linear nature with the concentration (C) of ‘Ga’ element. A linear T _C equation is proposed by fitting the present outcomes for H-local field correction function, which is in conformity with other results for the experimental data. Also, the present results are found to be in qualitative agreement with other such earlier reported data, which confirms the superconducting phase in the metallic glasses.      

Fabrication of high-quality submicron Nb/Al--AlOx/Nb tunnel junctions

Nb/Al-AlOx/Nb tunnel junctions are often used in the studies of macroscopic quantum phenomena and superconducting qubit applications of the Josephson devices. In this work, we describe a convenient and reliable process using electron beam lithography for the fabrication of high-quality, submicron-sized Nb/Al-AlOx/Nb Josephson junctions. The technique follows the well-known selective Nb etching process and produces high-quality junctions with Vm=100 mV at 2.3 K for the typical critical current density of 2.2 kA/cm^2, which can be adjusted by controlling the oxygen pressure and oxidation time during the formation of the tunnelling barrier. We present the results of the temperature dependence of the sub-gap current and in-plane magnetic-field dependence of the critical current, and compare them with the theoretical predictions.     

Superconducting state parameters of binary metallic glasses

Ashcroft’s empty core (EMC) model potential is used to study the superconducting state parameters (SSPs) viz. electron-phonon coupling strength λ, Coulomb pseudopotential μ*, transition temperature T _C , isotope effect exponent αand effective interaction strength N _O V of some binary metallic glasses based on the superconducting (S), conditional superconducting (S’) and non-superconducting (NS) elements of the periodic table. Five local field correction functions proposed by Hartree (H), Taylor (T), Ichimaru-Utsumi (IU), Farid et al. (F) and Sarkar et al. (S) are used for the first time with EMC potential in the present investigation to study the screening influence on the aforesaid properties. The T _C obtained from the H-local field correction function are in excellent agreement with available theoretical or experimental data. In the present computation, the use of the pseudo-alloy-atom model (PAA) was proposed and found successful. Present work results are in qualitative agreement with such earlier reported experimental values which confirm the superconducting phase in all metallic glasses. A strong dependency of the SSPs of the metallic glasses on the valence ‘Z’ is identified.      

LOM and HOM damping study in a superconducting deflecting cavity for ALS at LBNL

Superconducting deflecting cavities can be used in synchrotron light source to generate subpicosecond X-ray pulses while the impedance of the lower order modes (LOM) and higher order modes (HOM) in the cavity should be kept below an accepted level to avoid beam instability. These modes can be damped by adding waveguide on beam pipe. Detailed simulation of Q in CST Microwave Studio is introduced and experiment results on an aluminum model cavity with damping waveguide are reported to make a comparison.     

Achievement of a 920-MHz high resolution NMR

We have developed a 920-MHz NMR system and performed the proton NMR measurement of H(2)O and ethylbenzene using the superconducting magnet operating at 21.6 T (920 MHz for proton), which is the highest field produced by a superconducting NMR magnet in the persistent mode. From the NMR measurements, it is verified that both homogeneity and stability of the magnet have a specification sufficient for a high resolution NMR.     

Entanglement reciprocation between two charge qubits and two-cavity field

We propose a simple scheme to generate two-mode entangled coherent state in two separated cavities and realize the entanglement reciprocation between the superconducting charge qubits and continuous-variable system. By measuring the state of charge qubits, we find that the entanglement of two charge qubits, which are initially prepared in the maximally entangled state, can be transferred to the two-cavity field, and at this time the two-cavity field is in the entangled coherent state. We also find that the entanglement can be retrieved back to the two charge qubits after measuring the state of the two-cavity field.      

CO2 laser welding of copper slabs

For the first time it has been possible to laser weld copper sheets up to 3 mm thick with a 2 kW cw CO₂ laser. The main questions arising from the process are indicated.     

Short-Range Inverse-Square Law Experiment in Space

The objective of ISLES (Inverse-Square Law Experiment in Space) is to perform a null test of Newton's law in space with a resolution of one part in 10⁵ or better at 100 m. ISLES will be sensitive enough to detect axions with the strongest allowed coupling and probe large extra dimensions of string theory down to a few m. The experiment will be cooled to 2 K, which permits superconducting magnetic levitation of the test masses. This soft, low-loss suspension, combined with a low-noise SQUID, leads to extremely low intrinsic noise in the detector. To minimize Newtonian errors, ISLES employs a near null source, a circular disk of large diameter-to-thickness ratio. Two test masses, also disk-shaped, are suspended on the two sides of the source mass at a nominal distance of 100 m. The signal is detected by a superconducting differential accelerometer.