原子核质量的测量和评估

质量是原子核的基本性质之一,在核物理和核天体物理中都有重要的应用。原子核质量测量是目前核物理研究的一个前沿热点课题,国际上各个核物理实验室积极发展新设备和新技术,在短寿命放射性核素测量和超高精度质量测量方面取得了重要进展,本文对此进行了总结评述。在兰州重离子加速器冷却储存环（HIRFL-CSR）上利用等时性质量谱仪测量了一些原子核的质量,本文对其在测量精度、核态最短寿命等前沿进展做了简要介绍,并介绍了正在发展的双飞行时间质量谱仪。原子质量评估收集所有与原子核质量相关的实验数据,经过评估后推荐出质量值及相应误差。原子质量评估AME2016于2017年3月发表,为科技工作者提供基准数据。Mass is a fundamental property of the atomic nucleus. Nuclear mass data play an important role in nuclear physics and nuclear astrophysics. Thanks to the developments of novel mass spectrometers and radioactive nuclear beam facilities, the experimental knowledge of nuclear masses has been continuously expanding along two main directions, including:measurements aimed at high-precision mass values and at the most exotic nuclei far from the stability. The latest progress are reviewed in the paper. In the past few years, mass measurements of short-lived nuclides were performed using isochronous mass spectrometry based on the Cooler Storage Ring at the Heavy Ion Research Facility in Lanzhou(HIRFL-CSR). The progresses on the frontiers of short half-life and high precision are introduced. The Atomic Mass Evaluation (AME) is the most reliable source for the comprehensive information related to the atomic (nuclear) masses. The latest version of the AME, i.e., AME2016, was published in March, 2017, serving the research community with the benchmark data.     

基于手机APP实现驻波法对声速的测量

介绍了一种利用普通智能手机和一根两端开口奶茶管基于声驻波现象来测量声速的方法。这种实验方法所用的实验仪器随手可得,无需学生再到学校的实验室进行实验,激发了学生的学习兴趣,增强了学生的动手能力。     

基于FPGA反射式激光双速测量系统的设计与实现

物体在运动时旋转,可以减小物体运动过程中的空气阻力,增加运动运动稳定性,提高发射效率。而在一些发射系统中,弹丸在运动的过程中,也会发生旋转。通过测量弹丸的旋转速度和运动速度,可以更好的了解弹丸运动规律、调控运动行为,获取即时环境信息。文中提出了一种高灵敏度反射式测速系统,该测速系统采用高速响应数字激光传感器作为测量器件,采用FPGA编程进行控制和运算,具有抗低频电磁干扰的优点。应用该测速系统可以同时测量电磁发射系统中弹丸在出口处的水平运动速度和旋转速度。     

Evaluation of the performance of high temperature conversion reactors for compound-specific oxygen stable isotope analysis

In this study conversion conditions for oxygen gas chromatography high temperature conversion (HTC) isotope ratio mass spectrometry (IRMS) are characterised using qualitative mass spectrometry (IonTrap). It is shown that physical and chemical properties of a given reactor design impact HTC and thus the ability to accurately measure oxygen isotope ratios. Commercially available and custom-built tube-in-tube reactors were used to elucidate (i) by-product formation (carbon dioxide, water, small organic molecules), (ii) 2nd sources of oxygen (leakage, metal oxides, ceramic material), and (iii) required reactor conditions (conditioning, reduction, stability). The suitability of the available HTC approach for compound-specific isotope analysis of oxygen in volatile organic molecules like methyl tert-butyl ether is assessed. Main problems impeding accurate analysis are non-quantitative HTC and significant carbon dioxide by-product formation. An evaluation strategy combining mass spectrometric analysis of HTC products and IRMS ¹⁸O/¹⁶O monitoring for future method development is proposed.     

PROGRESS IN MEASUREMENT TECHNOLOGY FOR DRILL STRING VIBRATION

随着深井、超深井数量的快速增加, 钻柱振动导致的钻具失效问题更加突出. 针对钻柱振动的研究可分为理论与数值模拟、测量分析两种方法. 由于钻柱振动具有复杂的非线性特征, 使得理论与数值模拟研究受到了很大限制, 因此井下振动测量技术的研究显得尤为重要. 本文比较全面和系统地介绍了国内外钻柱振动测量技术研究现状和进展情况, 并对几个应用较为成熟的国外测量系统的工作原理、分析方法及应用技术进行了详细的综述. 所得结论可为我国井下振动测量技术的发展提供重要参考.     

电阻应变测试技术中的温度补偿功能辨析

针对基于温度应变补偿的结构电阻应变测试技术,分析了结构温度应变的产生原理与结构温度应变的补偿原理,辨析了结构温度应变与补偿块温度应变二者的相互关联与差异.在此基础上,指出了基于温度应变补偿模式的结构电阻应变测试技术的错误在于:概念上混淆了结构的温度应变与补偿块的温度应变,导致了结构温度应变的错误补偿.同时,给出了正确实现工程结构应变测试的环境条件,以最大限度地保证了结构应变测试数据的客观性与可靠性.     

数字梯度敏感方法及其在航空透明件断裂力学中的应用

本文将数字梯度敏感方法用于航空透明件断裂力学问题研究。首先,基于透明材料的弹性-光学效应,建立了透明件应力状态与光线穿过透明件后的偏转角之间的关系。在平面应力假设下,利用最小二乘拟合建立了I型裂纹尖端应力强度因子与光学偏转角的关系。其次,通过数字梯度敏感方法搭建非接触光学测试平台,开展了带单边裂纹的航空有机玻璃试件三点弯曲实验,应用数字梯度敏感方法提取了I型裂纹尖端应力强度因子。最后,通过选择不同计算子区域和步长大小,分析了数字梯度敏感方法中的子区域和步长选择对计算结果的影响。研究结果表明,数字梯度敏感方法实验所得应力强度因子与经验公式计算所得结果偏差小于10%,通过增加最小二乘拟合项数以及合理的子区域和步长选择可以减小数字梯度敏感方法计算应力强度因子误差。     

双目视觉技术在高超声速颤振风洞试验中的应用

以验证高超声速颤振风洞试验技术为目标,为了获取试验模型在风洞流场激励下的位移形貌,运用风洞试验的方法研究了某翼面模型的颤振特性。采用一种基于双目视觉系统的试验方法,系统主要由CCD相机、图像采集卡和控制计算机组成,通过立体视觉标定和数字图像处理技术解算出模型变形的形貌。试验结果表明,该方法应用成功,与CFD/CSD数值计算结果比对良好,验证了该技术在高超声速风洞试验中应用的可行性。     

制造云服务组合柔性的四维属性测度方法

云制造环境下服务资源进行动态组合时不可避免地遇到内、外部环境的不确定性,这些不确定性因素直接影响到制造云服务组合的执行成本、效率和质量。为了有效提升制造云服务组合的柔性,需要对其柔性能力进行测度。在假定某待选云服务集中的各服务资源能够以不同的效率替代完成任务的基础上,建立了考虑制造云服务组合柔性的效率柔性、冗余柔性、路径柔性和任务柔性的四维属性测度方法。最后,结合具体算例对该方法的应用过程进行了分析。     

TOT measurement implemented in FPGA TDC

Time measurement plays a crucial role for the purpose of particle identification in high energy physics experiments. With increasingly demanding physics goals and the development of electronics, modern time measurement systems need to meet the requirement of excellent resolution specification as well as high integrity. Based on Field Programmable Gate Arrays(FPGAs), FPGA time-to-digital converters(TDCs) have become one of the most mature and prominent time measurement methods in recent years. For correcting the time-walk effect caused by leading timing, a time-over-threshold(TOT) measurement should be added to the FPGA TDC. TOT can be obtained by measuring the interval between the signal leading and trailing edges. Unfortunately, a traditional TDC can recognize only one kind of signal edge, the leading or the trailing. Generally, to measure the interval, two TDC channels need to be used at the same time, one for leading, the other for trailing. However, this method unavoidably increases the amount of FPGA resources used and reduces the TDC's integrity.This paper presents one method of TOT measurement implemented in a Xilinx Virtex-5 FPGA. In this method,TOT measurement can be achieved using only one TDC input channel. The consumed resources and time resolution can both be guaranteed. Testing shows that this TDC can achieve resolution better than 15 ps for leading edge measurement and 37 ps for TOT measurement. Furthermore, the TDC measurement dead time is about two clock cycles, which makes it good for applications with higher physics event rates.