Studies on the thermotropic liquid crystalline polycarbonates. III. Synthesis and properties of fully aromatic liquid crystalline polycarbonates

Four series of fully aromatic thermotropic liquid crystalline polycarbonates were prepared by melt polycondensation from various novel phenylene diphenyl dicarbonates with monomers, such as hydroquinone, methylhydroquinone, chlorohydroquinone, resorcinol, bisphenol A, 4,4′-dihydroxydiphenylsulfone, or phenylhydroquinone, respectively. The thermotropic liquid crystalline properties were studied by polarizing microscope with a heating stage, differential scanning calorimeter (DSC), and wide-angle x-ray diffraction (WAXD). It was found that the nonlinearity of the carbonate group was compensated by resorcinol (1,3-phenylene unit), a bent shape unit. Nematic melts were found for the resulting polycarbonates. © 1993 John Wiley & Sons, Inc.     

Fully imidized soluble polyimides based on a novel dianhydride: 2,2′-dichloro-4,4′,5,5′-benzophenone tetracarboxylic dianhydride

We have synthesized a novel dianhydride, 2,2′-dichloro-4,4′,5,5′-benzophenone tetracarboxylic dianhydride (DCBTDA). Polyimides were synthesized with DCBTDA or 3,3′,4,4′-benzophenone tetracarboxylic dianhydride (BTDA) and several relatively rigid meta- and para- substituted mononuclear diamines. The BTDA based systems were insoluble in dipolar, aprotic solvents whereas the DCBTDA based polymers displayed enhanced solubility in these solvents. The thermal stability of these polyimides was excellent as measured by 5% weight loss decomposition. The T_g's of the polymers were all above 290°C.     

Simultaneous determination of tetrahydro-β-carbolines and β-carbolines

Summary Reversed-phase ion-pair HPLC with fluorimetric detectors connected in series was studied for the simultaneous determination of two tetrahydro--carbolines and two -carbolines. After additon of internal standards the samples were reacted with fluorescamine, and then subjected to serial extractions to remove their precursor (tryptamine) from the analytical system. This treatment not only suppressed the artefactual formation of tetrahydro--carbolines and -carbolines during analysis, but also effectively purified them. Under optimum conditions, using trifluoroacetic acid as counter ion, all analytes were separated within 14 min and without major interfering peaks. The quantitative ranges were 0.25–80.0 ng mL^–1 for both tetrahydro--carbolines and 0.1–30.0 ng mL^–1 for both -carbolines. Replicate spiking experiments showed that recovery from most of the samples tested was over 90% and the relative standard deviation ranged from 0.7 to 10.4% within and between assays. The proposed method was applicable to various materials such as soy sauce, vinegar, ketchup, tabasco, beer, wine, sake, whisky, brandy, cows' milk, coffee, cocoa, cheese, cigarette smoke and urine.     

Thermodynamics of formation of nitrogen bases and d-ribose from mineral substances in light of the problem of origination of simplest elements of living matter

The paper represents a further development of our hydrate hypothesis of simplest living matter origination (SLMO) from inorganic and simplest organic mineral substances. It is supposed that the sources of SLMO are simplest aliphatic hydrocarbons, niters, and phosphates. Thermodynamic calculations demonstrating a principal possibility for simultaneous syntheses of different nitrogen bases, d-ribose, and desoxy-d-ribose from these source substances are presented. The most probable principal mechanism of SLMO and the principal conditions necessary for realization of the proposed chemism of SLMO in the framework of the proposed mechanism are considered. A principal means for testing the hypothesis is proposed.     

高效液相色谱检测反－2－苯基－邻－硝基肉桂酸

初探了反－２－苯基－邻－硝基肉桂酸（ＰＮＣＡ）的高效液相色谱分离，优选出了最佳分离条件。所建立的方法简单、快速，适用于工业生产中的控制及分析。     

Solvent-free low-dimensional polymer electrolytes for lithium-polymer batteries

The development of solvent-free low-dimensional polymer electrolytes intended for use in solvent-free lithium batteries operating at ambient or sub-ambient temperatures is described. The synthetic routes to the amphiphilic polymers I having 5-alkoxy-3,4-phenylene units connected with oligoethoxy segments via polyester-ether or pure polyether links (abbrev. CmOn, m = 12, 16, 18, n = 1-5) and to the copolymers CmO1-CmOn are described. The structures, thermal properties and SAXS long spacings of their complexes with lithium salts (type A) and with long chain n-alkane or alkyl side chain intercalation (type B) are discussed. However, high ambient conductivities (10(-4)-10(-3) S cm(-1)) are observed in type C systems when a second copolymer based on polytetramethylene oxide segments (II) is incorporated as a microphase between the lamellae of I and serving as an ion bridge or "glue". DC polarization between Li electrodes also gives ambient conductivities >/=ca.10(-3) S cm(-1). In type D systems the I/II interface is stabilized by including a copolymer III, promoting high reproducibility in performance. Copolymers I of CmO1-CmO5 having CmO1 in excess give optimum conductivities with low temperature-dependence. This, together with molecular modeling, suggests uncoupled ion mobilities by hopping between small aggregates in the interlamellar spaces.     

Determination of trace silver by solid substrate room temperature phosphorescence quenching method based on lead carboxymethyl cellulose particles (Pb(CMC)2) containing luminescent salicyl fluorenes molecules

Luminescent particles of lead carboxymethyl cellulose (Pb(CMC)2) containing salicyl fluorones (THBF), Pb(CMC)2-THBF were synthesized by the sol-gel method, using sodium carboxymethyl cellulose (NaCMC) as precursor and Pb2+ as precipitant. Pb(CMC)2-THBF can emit the intense and stable solid substrate room temperature phosphorescence (SS-RTP) on filter paper. And EDTA can chelate Pb2+ in Pb(CMC)2-THBF, causing it to decompose into aqueous soluble components PbY2-, CMC- and THBF, which can react with Ag+ to form Ag(CMC)2-THBF, causing the decrease of phosphorescence intensity. Based on the facts above, a new method for the determination of trace silver by SS-RTP quenching method was established. The linear range of this method is 8.0-40.0 fg spot(-1) (20.0-100.0 pg ml(-1)), with a detection limit (LD) of 2.2 fg spot(-1) (corresponding to a concentration range of 5.5 x 10(-13) g ml(-1)), and the regression equation of working curve is DeltaI(p) = 12.56 + 0.5527C(Ag+) (fg spot(-1), 0.4 microl spot(-1)), n = 8, r = 0.9992. This method has been applied to the determination of trace silver in human hair and tea sample with satisfactory results. The mechanism of SS-RTP emission is also discussed.     

Determination of acidic chlorinated pesticides in water: Comparison of official EPA method 515.1 and liquid-solid extraction HPLC/UV and HPLC/PBMS analyses

Summary A comparison of the official EPA method 515.1 for determination of chlorinated acidic pesticides and a modification of it is illustrated. Extraction of the analytes from water and their determination and quantitation is by gas chromatography-electron capture detection (GC-ECD), liquid chromatography-UV detection and liquid chromatography-particle beam mass spectrometry. Although HPLC-PBMS was found to be less sensitive than the GC-ECD method, it was, nevertheless, more sensitive than HPLC-UV. The modified method is simpler, quicker and allows more accurate determination of pesticides in aqueous samples.Deceased July 31, 1996     

热致性液晶聚酯酰亚胺高分子的合成

本文以己二胺，癸二胺和对－亚苯基－双苯偏三酸酯二酐为单体通过溶液聚合反应制备了聚酯酰亚胺系列共聚物．采用ＩＲ，ＷＡＸＤ，ＤＳＣ和偏光显微镜研究了共聚物的结构和液晶性能，结果表明，聚合物具有热致液晶性，且随二胺单体摩尔组成的变化，共聚物的熔点Ｔｍｌ和玻璃化转变温度Ｔ８呈规律性变化．     

Selection of a Representative Matrix for Calibration in Multianalyte Determination of Pesticides in Vegetables by Liquid Chromatography-Electrospray Tandem Mass Spectrometry

An analytical method for determining residues of twenty pesticides by liquid chromatography (LC) coupled to electrospray ionisation (ESI) tandem mass spectrometry (MS-MS) in eight commodities, cucumber, tomato, pepper, green bean, eggplant, zucchini, melon and watermelon, has been developed and validated. On one hand, calibration curves prepared in solvent were compared with calibration curves prepared in a blank matrix extract of each target matrix. On the other hand, calibration curves and recoveries for each commodity were compared. Cucumber was selected as potential reference matrix for the target vegetables.