Finest image sharpening by use of the modified mask filter dealing with highest spatial frequencies

We demonstrate a new finding that the filtering-mask with merely four coefficients in the vertical and horizontal directions could be the best choice to achieve finest image sharpening. The mask's merit to better magnify highest spatial frequencies is unveiled by employing the nonlinear transfer function, which has been proved liable to reduce the overshooting effect. By use of this chosen mask, the enhanced image is capable of manifesting extreme sharpness.     

Research Progress and Application of Ion Funnel Technique

Ion funnel is a new-style ion guider which can reduce spatial divergence and energy dispersity of the transmission ions by using radio frequency (RF) electric field to confine the ions radially and the direct current (DC) axial electric field to move the ions toward the exit, and thus it can greatly increase the ion transmission efficiency and improve the sensitivity of the mass spectrometry. Since ion funnel was invented in 1997, it has attracted a close attention of mass spectrometry scientists all over the world. Ion funnel has been used in various kinds of mass spectrometry, and built a bridge with high efficiency ion transmission between low vacuum ionization source and high vacuum mass analyzer. In this paper, the principle, technology development, and application progress of ion funnel are reviewed, and the future prospects are prospected.     

基于回波平移序列的快速三维磁共振温度成像方法

高强度聚焦超声（HIFU）是一种无创的热消融疗法，为保证其安全性和有效性，需要一种精度高、速度快的测温方法在其治疗过程中对温度进行监控.基于质子共振频率位移（PRFS）的磁共振温度成像（MRT）对温度具有较高的灵敏度，且与温度具有良好的线性关系，因此常被用于引导HIFU治疗.然而在实际应用中，HIFU治疗的最大隐患在于可能造成表皮灼伤，并且灼伤区域可能与焦点区域相隔较远.因此MRT的监控范围十分重要.本文基于三维回波平移成像序列，结合可控混叠的空间并行成像技术，实现了时间分辨率为3 s的快速三维温度成像.为了验证该方法的精度，本文首先设计了仿体降温实验，利用光纤温度计验证回波平移序列测温的准确度和精确度.然后在室温条件下扫描离体猪肉组织，对比加速前后的MRT的测温精确度.在HIFU加热条件下扫描离体猪肉组织，对比加速前后的MRT的测温准确度.结果显示，本文提出的方法可以在3 s内完成三维温度精准测量，对于HIFU治疗的安全监控具有重要意义.     

Measurements in Situ and Spectral Analysis of Wind Flow Effects on Overhead Transmission Lines

In the paper an important issue of vibrations of the transmission line in real conditions was analyzed. Such research was carried out by the authors of this paper taking into account the cross-section of the cable being in use on the transmission line. Analysis was performed for the modern ACSR high voltage transmission line with span of 213.0 m. The purpose of the investigation was to analyze the vibrations of the power transmission line in the natural environment and compare with the results obtained in the numerical simulations. Analysis was performed for natural and wind excited vibrations. The numerical model was made using the Spectral Element Method. In the spectral model, for various parameters of stiffness, damping and tension force, the system response was checked and compared with the results of the accelerations obtained in the situ measurements. A frequency response functions (FRF) were calculated. The credibility of the model was assessed through a validation process carried out by comparing graphical plots of FRF functions and numerical values expressing differences in acceleration amplitude (MSG), phase angle differences (PSG) and differences in acceleration and phase angle total (CSG) values. Particular attention was paid to the hysteretic damping analysis. Sensitivity of the wave number was performed for changing of the tension force and section area of the cable. The next aspect constituting the purpose of this paper was to present the wide possibilities of modelling and simulation of slender conductors using the Spectral Element Method. The obtained results show very good accuracy in the range of both experimental measurements as well as simulation analysis. The paper emphasizes the ease with which the sensitivity of the conductor and its response to changes in density of spectral mesh division, cable cross-section,tensile strength or material damping can be studied.     

任意高差的多档输电线动刚度理论建模

针对目前多档输电线动力特性研究中存在的不足,将任意一档导线视为子结构并基于现有的索振动理论获得了其动张力;利用相邻两档导线的动张力建立了悬垂绝缘子串绕其悬挂点摆动的动力学方程;综合每一档导线的振动方程以及悬垂绝缘子串的摆动方程建立了两档及三档输电线的动力学方程,求解得到由端部位移激励产生的动刚度;通过对动刚度进行分析得到了多档输电线的固有频率以及模态的理论表达形式;建立了小高差的两档及三档导线的有限元模型,理论分析结果与有限元结果一致,验证了理论公式的正确性。本文提出的动刚度理论对于研究多档输电线的动态响应具有重要的应用价值。     

1.3 GHz超导腔磁通排出效应研究

设计并搭建了一套高精度的磁场测量和补偿系统,并结合中国科学院高能物理研究所(IHEP)的2K超导腔垂直测试平台对1.3 GHz单加速间隙超导腔的磁通排出效应开展了实验研究:利用研制的磁场测量和补偿系统能够精密地测量超导腔赤道位置磁场,并能够将磁场补偿至小于5.0×10-8 T;并对超导腔不同表面温度梯度下的磁通排出效应进行了测量分析;对钉扎了磁场的超导腔进行了射频性能测试,研究了超导腔电阻对磁通钉扎的敏感度,以及在不同电场梯度下超导腔的表面电阻变化情况。结果表明,研制的高精度磁场测量和补偿系统能够满足超导腔磁通排出研究的需求;高的超导腔表面温度梯度有利于磁通的排出;磁通钉扎电阻的敏感度随着加速电场梯度的增加而增大,导致超导腔的性能下降。此实验研究也为后续超导腔的研制奠定了一定基础。     

RIG型磁光薄膜的研究进展及应用

随着光通信技术与光子集成电路的发展,非互易性器件作为光通信系统中重要的组成部分得到了越来越广泛的研究与应用。基于磁光效应制成的磁光隔离器和环行器是目前应用最为广泛的非互易性器件,为了将非互易性器件整块集成在硅片上,需制备性能与块状磁光材料相当的磁光薄膜。在近红外通信波段(1 550 nm),以钇铁石榴石(Y₃Fe₅O₁₂,YIG)为代表的稀土铁石榴石(RIG)具备优良的磁光效应,是最具应用前景的磁光材料之一。研究发现,使用稀土离子对YIG薄膜进行掺杂可以有效改善其磁光性能,尤其是Bi³⁺和Ce³⁺掺杂的YIG表现出巨法拉第效应。本文首先介绍了法拉第效应原理,介绍了三种常见磁光薄膜的生长方法,回顾了近年来的主要研究成果,介绍了磁光薄膜在光隔离器和环行器中的应用,最后对磁光薄膜的未来发展趋势进行了展望。     

Chaotic flows with a single nonquadratic term

This paper addresses a previously unexplored regime of three-dimensional dissipative chaotic flows in which all but one of the nonlinearities are quadratic. The simplest such systems are determined, and their equilibria and stability are described. These systems often have one or more infinite lines of equilibrium points and sometimes have stable equilibria that coexist with the strange attractors, which are sometimes hidden. Furthermore, the coefficient of the single nonquadratic term provides a simple means for scaling the amplitude and frequency of the system.     

Detection on micro-Doppler effect based on 1550 nm laser coherent radar

A laser coherent detection system of 1550 nm wavelength was presented, and experimental research on detecting micro-Doppler effect in a dynamic target was developed. In this paper, the return signal in the time domain is decomposed into a set of components in different wavelet-scales by multi-resolution analysis, and the components are associated with the vibrational motions in a target. The micro-Doppler signatures are extracted by applying the reconstruction (inverse wavelet transform). During the course of the final data processing frequency analysis and time–frequency analysis are applied to analyze the vibrational signals and estimate the motion parameters successfully. The experimental results indicate that the micro-Doppler information in a moving can be effectively detected, and tiny vibrational signatures also can be acquired effectively by wavelet multi-resolution analysis and time–frequency analysis.