Effect of epitaxial growth on the formation of the cobalt catalysts of the Fischer-Tropsch synthesis

Mixed oxides Co_xAl_yO₄ with different Al/Co ratios applied as supports for the catalysts of the Fischer-Tropsch synthesis were prepared using the solid-state chemical reaction. The Co_xAl_yO₄ supports were prepared by modifying gibbsite with various cobalt salts (acetate, nitrate, and basic carbonate). The use of basic cobalt carbonate gives the Co(20%)/Co_xAl_yO₄ catalyst, which provides an increased yield of hydrocarbons C₅₊ and a decreased methane content compared to the impregnation catalyst Co(30%)/Al₂O₃. The introduction of small amounts of rhenium additives makes it possible to enhance the yield of hydrocarbons C₅₊ (179 g m⁻³) and also to increase the selectivity with respect to the C₅–C₁₈ fraction. The introduction of basic cobalt carbonate into the support, most likely, creates favorable conditions for the epitaxial growth of the precursor of the active phase. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1856–1860, September, 2007.     

Estimating reaction parameters in mechanism-enabled population balance models of nanoparticle size distributions: A Bayesian inverse problem approach

In order to quantitatively predict nano- as well as other particle-size distributions, one needs to have both a mathematical model and estimates of the parameters that appear in these models. Here, we show how one can use Bayesian inversion to obtain statistical estimates for the parameters that appear in recently derived mechanism-enabled population balance models (ME-PBM) of nanoparticle growth. The Bayesian approach addresses the question of “how well do we know our parameters, along with their uncertainties?.” The results reveal that Bayesian inversion statistical analysis on an example, prototype nanoparticle formation system allows one to estimate not just the most likely rate constants and other parameter values, but also their SDs, confidence intervals, and other statistical information. Moreover, knowing the reliability of the mechanistic model's parameters in turn helps inform one about the reliability of the proposed mechanism, as well as the reliability of its predictions. The paper can also be seen as a tutorial with the additional goal of achieving a “Gold Standard” Bayesian inversion ME-PBM benchmark that others can use as a control to check their own use of this methodology for other systems of interest throughout nature. Overall, the results provide strong support for the hypothesis that there is substantial value in using a Bayesian inversion methodology for parameter estimation in particle formation systems.     

Growth kinetic study of ionic liquid mediated synthesis of gold nanoparticles using Elaeis guineensis (oil palm) kernels extract under microwave irradiation

Gold nanoparticles (AuNPs) are the most studied nanomaterials due to their promising applications. However, surface capping of AuNPs is essential to protect aggregation for enhanced colloidal stability. In this study, a single step method was established to synthesize stable AuNPs using oil palm kernel (OPK) extract prepared in IL[EMIM][OAc] (1-ethyl-3-methylimidazolium acetate). Ionic liquids were used for phytochemicals extraction along with capping and stabilizing of AuNPs after their synthesis. The OPK extract reduced the gold precursor, and UV–vis spectroscopy revealed a sharp surface plasmon (SPR) peaks in the region of 524–529 nm, which confirmed the formation of AuNPs. UV–vis and TEM analysis indicated that microwave assisted synthesis was rapid to synthesize well dispersed and small sized AuNPs in comparison with conventional heating. FTIR analysis of kernels extract before and after its reaction with gold precursor identified the involvement of CH aromatic groups, polyphenolic OH groups, and carbonyl amide groups that are responsible for reduction of trivalent gold ions to AuNPs. EDAX and XPS analysis were performed to identify the elemental gold and its surface interaction with ILs and other organic moieties. Colloidal AuNPs kept at room temperature for periods of six months were remained stable. The change of pristine nanostructure arises due to involvement of different driving forces during growth of nanoparticles. Thermodynamically instability of nanomaterials may leads to Ostwald Repining (OR) or adopt complex pattern of growth and undergo coalesce and orientation attachment (OA). These models were fitted to compare the theoretically growth of particles along with actual increase of particles size. Experimental results suggested that OA growth was originated in early phase, however, it substituted and mainly controlled by OR growth pattern over time.     

Kinetics of batch production of single-cell protein from cheese whey

A kinetic model for single-cell protein batch fermentation was developed using the numerical simultaneous integration approach of the fourth-order Runge-Kutta method. The model takes into account the effect of substrate inhibtion, maintenance energy, and cell death on the cell growth and substrate utilization during the fermentation process. The theoretical results obtained from the model compared well with the experimental data. The model was used to study the effect of the initial substrate concentration on the lag period, fermentation time, specific growth rate, population size, and cell productivity of batch fermentation. Increasing the initial substrate concentration increased the lag period and fermentation time and decreased the specific growth rate and cell yield. The growth limiting substrate concentration was 2.9 g/L, whereas the growth inhibiting substrate concentration was 69.0 g/L. Increasing the initial substrate concentration above 150 g/L significantly decreased the yeast population size.     

常温直接沉淀法制备ZnO纳米棒

在常温下, 以PEG-400(聚乙二醇400)为表面活性剂, 采用直接沉淀法合成了ZnO纳米棒. 产物用XRD, TEM, SAED和 HRTEM等进行了表征. 结果表明, 所得ZnO为一维的纳米棒, 属于六方纤维矿的单晶结构. ZnO纳米棒的直径在20~40 nm之间, 长度在300~800 nm范围. (0001)面为ZnO纳米棒的生长方向. 讨论了ZnO相的生成和ZnO纳米棒的形成机理以及PEG-400在其形成过程中的作用.     

一般增长曲线模型参数阵的BLU估计

考虑一般增长曲线模型：Ｙ＝Ｘ１ＢＸ２＋εＥ（Ｖｅｃ（ε））＝０Ｖ（Ｖｅｃ（ε））＝σ２ＶＩｎ（Ｖ０）本文对任一可估函数ＫＢＬ给出了它的ＢＬＵ估计（最佳线性无偏估计），并得到了方差σ２的一个无偏估计．     

Synthesis,growth and characterization of non-linear optical material: l-Tryptophan p-nitrophenol (LTPNP) single crystal

A new nonlinear optical organic crystal l-tryptophan p-nitrophenol (LTPNP) of dimension 19 mm × 2 mm × 1.5 mm has been grown from an aqueous solution for the first time by slow evaporation technique at ambient temperature. The crystal structure of LTPNP was confirmed by single crystal X-ray diffraction. LTPNP crystallizes in non-centrosymmetric monoclinic system with space group P₂₁. The recorded FTIR spectrum confirms the presence of various functional groups in the grown crystal and confirms the formation of LTPNP. Thermal stability and melting temperature of the LTPNP crystal were identified from TG/DTA analysis. The optical absorption study confirms the suitability of the crystal for device applications. LTPNP exhibits SHG efficiency over 1.7 orders of magnitude higher than that of urea and 4 orders of magnitude higher than that of KDP.     

Synthesis and Characterization of Titanium-doped Ordered Mesoporous Alumina

Titanium-doped ordered mesoporous alumina with specific structural properties has been prepared by the evaporation induced self-assembly sol-gel method. The results show that the doped titanium helps to stabilize the ordered mesoporous alumina material without influencing the ordered mesoporosity. The textural properties of the obtained sample are related to the amount of doped titanium. When the molar ratio of aluminum to titanium(n(Al)/n(Ti)) is controlled as 10.2, the titanium-doped ordered mesoporous alumina exhibits high surface area(up to 218 m2 g-1), large pore volume(0.42 cm3 g-1) and narrow pore diameter(6.1 nm) after treating at 900 ℃, showing high thermal stability. Moreover, the obtained sample calcined at 900 ℃ still maintains ordered mesoporous structure and exhibits high thermal stability.     

Seed‐Mediated Synthesis of Gold Tetrahedra in High Purity and with Tunable,Well‐Controlled Sizes

We report a facile synthesis of Au tetrahedra in high purity and with tunable, well‐controlled sizes via seed‐mediated growth. The success of this synthesis relies on the use of single‐crystal, spherical Au nanocrystals as the seeds and manipulation of the reaction kinetics to induce an unsymmetrical growth pattern for the seeds. In particular, the dropwise addition of a precursor solution with a syringe pump, assisted by cetyltrimethylammonium chloride and bromide at appropriate concentrations, was found to be critical to the formation of Au tetrahedra in high purity. Their sizes could be readily tuned in the range of 30–60 nm by simply varying the amount of precursor added to the reaction solution. The current strategy not only enables the synthesis of Au tetrahedra with tunable and controlled sizes but also provides a facile and versatile approach to reducing the symmetry of nanocrystals made of a face‐centered cubic lattice.