室温离子液体EMIES的标准生成焓

在(298.15 ±0.01) K下用转动弹热量计测定了离子液体硫酸乙酯-1-甲基-3-乙基咪唑(EMIES)及合成它的原料1-甲基咪唑的恒容燃烧热,通过计算得到它们的标准燃烧焓 分别为(－2671±2) 和(－286.3±0.5) kJ·mol－1;标准生成焓 分别为(－3060±3) kJ·mol－1和(－2145±4) kJ·mol－1.结合文献上硫酸二乙酯的标准生成焓数据,得到了合成离子液体EMIES的反应热(－102.3±1.0) kJ·mol－1,与合成实验中观察到的强烈放热现象是一致的.根据离子液体EMIES的热容数据,计算了不同温度下EMIES的标准生成焓.     

添加剂铜和银离子对MnO2催化燃烧CH4的影响

催化燃烧法，由于起燃温度低、去除率高、适用氧浓度范围大、无二次污染、燃烧缓和等，是国内外治理有机废气时，回收利用能量最有效的方法之一［１］．但目前用于该过程的催化剂中均含有来源有限、价格昂贵的贵金属铂或钯［２］．因此，寻找来源丰富、价格低廉、性能相当...     

Thermochemistry of the solid complex Gd(Et<Subscript>2</Subscript>dtc)<Subscript>3</Subscript>(phen)

Summary A ternary solid complex Gd(Et₂dtc)₃(phen) has been obtained from reactions of sodium diethyldithiocarbamate (NaEt₂dtc), 1,10-phenanthroline (phen) and hydrated gadolinium chloride in absolute ethanol. The title complex was described by chemical and elemental analyses, TG-DTG and IR spectrum. The enthalpy change of liquid-phase reaction of formation of the complex, Δ_rH^Θ_m(l), was determined as (-11.628±0.0204) kJ mol^-1 at 298.15 K by a RD-496 III heat conduction microcalorimeter. The enthalpy change of the solid-phase reaction of formation of the complex, Δ_rH^Θ_m(s), was calculated as (145.306±0.519) kJ mol^-1 on the basis of a designed thermochemical cycle. The thermodynamics of reaction of formation of the complex was investigated by changing the temperature of liquid-phase reaction. Fundamental parameters, the apparent reaction rate constant (k), the apparent activation energy (E), the pre-exponential constant (A), the reaction order (n), the activation enthalpy (Δ_rH^Θ_≠), the activation entropy (Δ_rS^Θ_≠), the activation free energy (Δ_rG^Θ_≠) and the enthalpy (Δ_rH^Θ_≠), were obtained by combination of the thermodynamic and kinetic equations for the reaction with the data of thermokinetic experiments. The constant-volume combustion energy of the complex, Δ_cU, was determined as (-18673.71±8.15) kJ mol^-1 by a RBC-II rotating-bomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_cH^Θ_m, and standard enthalpy of formation, Δ_fH^Θ_m, were calculated to be (-18692.92±8.15) kJ mol^-1 and (-51.28±9.17) kJ mol^-1, respectively.     

Surface characterization of Co,K/La2O3 catalysts used for the catalytic combustion of diesel soot

Catalysts of Co,K/La₂O₃ have been prepared by wet impregnation. The samples have been calcined at 400°C and 700°C and have been characterized for phase composition using x‐ray diffraction and Fourier transform infrared spectroscopy. The XPS analysis of the samples has been obtained by examination of the O 1s, K 2p, C 1s and La 3d spectral regions. The XPS data are discussed with respect to the calcination temperatures and the soot combustion performed in the spectrometer reaction chamber. Analysis of the XPS data indicates considerable carbonation of the surfaces of all samples, even after burning the soot. The K/La₂O₃ solid presents the highest content of surface carbonated species, showing the highest catalytic activity for soot combustion. Interaction of the catalysts with CO₂ is studied by temperature‐programmed desorption and microbalance experiments. Kinetic studies and surface characterization of the potassium‐containing samples suggest that an appropriate surface potassium concentration is necessary for a synergetic action between potassium and lanthanum. In the cobalt‐containing catalysts calcined at 700°C, an increase is observed in the concentration of the outer‐layer perovskite species when the potassium content increases, following the same tendency observed in the bulk. Such LaCoO₃ species would limit the reaction of lanthanum with CO₂. Copyright © 2003 John Wiley & Sons, Ltd.     

采用一体化燃煤添加剂的燃烧中固硫作用研究

针对五个不同煤种 ,研制出与之相匹配的催化燃烧及固硫一体化添加剂 ,采用高温定硫仪对其燃烧固硫效果进行了评价 ,考察了温度、Ca S摩尔比等影响因素 ,并着重讨论了一体化添加剂中催化燃烧组分的协同固硫作用。结果表明 ,一体化添加剂中的金属催化组分对CaO固硫具有较大的协同促进作用 ,固硫作用适宜的Ca S摩尔比因而可适当降低 ,一体化添加剂在燃烧固硫方面比传统单一组分固硫剂更具优越性 ,从而使催化燃烧和燃烧固硫两个过程有机地结合在一起。     

氧化条件下NOx催化的甲烷均相部分氧化

考察了没有固体催化剂时NOx对甲烷气相氧化的促进作用.实验结果表明，即使在强氧化条件下（O2/CH4=5），NOx对甲烷部分氧化制一氧化碳仍然有明显的催化活性.在CH4-O2体系中加入0.005％～0.2％的NO后，反应温度可降低200-300 ℃.在反应产物中还可观察到甲醛和乙烯，通过改变反应条件可以控制它们的相对浓度.     

Conventional hydrothermal process versus microwave-assisted hydrothermal synthesis of La1−xAgxMnO3+δ (x = 0, 0.2) perovskites used in methane combustion

A study on the synthesis of La_1−xAg_xMnO_3+δ (x = 0, 0.2) using a microwave process (MWhyd) has been carried out by comparing the heating time and reaction temperature with the same factor under conventional thermal process (CHhyd). Experiments have been conducted using the hydrothermal method at medium pressure (T = 200 °C, P = 20 atm) followed by a thermal treatment of the precursor at 700 °C (10 h).Structural and physico-chemical properties of the catalysts were investigated using X-ray diffraction (XRD), BET sorption, temperature-programmed reduction or desorption, mass spectrometry (TPR-MS and TPD-MS), and X-ray photoelectron spectroscopy (XPS). While CHhyd and MWhyd powder catalysts exhibited the same XRD patterns indexed as pure perovskite structure, their surface physico-chemical properties were found to be strongly influenced by the preparation method. The effect of the nature of oxygen species, their amount and mobility, evidenced by temperature programmed experiments, on the catalytic properties in methane combustion in the presence and in the absence of hydrogen sulphide has been studied. MWhyd-La_0.8Ag_0.2MnO_3+δ catalysts were found to exhibit a much better performance in methane combustion together with higher resistance to sulphur poisoning than CHhyd catalysts.     

Topical Problems in Elemental Analysis of Advanced Ceramic Materials

Selected prominent problems in the analysis of advanced ceramic materials are surveyed. The importance of reliability of results is discussed in the field of elemental trace- and microanalysis in view of its interaction with economy, power of detection, local resolution and speciation selectivity. Particular problems in the analysis of major constituents, trace components and microlocal distributions are based on the striking propertics of ceramics; they are exemplified. Analytical assistance must start from the beginning of the production processing, in the preparation of the powdered base materials. Determination of the stoichiometry requires high accuracy and differentiation of chemical species in bulk and surface analysis of ceramic base powders. Element trace determination by direct instrumental methods requires standard reference materials for calibration; these are currently inavailable in a sufficient variety. For optimum reliability and power of detection, element traces must be prepared in isolated form in a small excitation volume for analysis. A review on the state-of-the-art of wet-chemical combined procedures is presented. Decomposition position procedures are emphasized, due to their risk of contributing severe systematic error. Combustion in elementary fluorine is presented for decomposition of refractory materials. The performance of some direct procedures is discussed. Very efficient methods are available for element trace determinations in ceramic materials, offering high detection power. Several approaches for high-resolution local microanalysis in non-conductive ceramic materials are identified as the most promising development in the analysis of sintered compact ceramic products and devices.     

NiO/SnO2-ZrO2催化剂的制备及甲烷燃烧催化性能的研究

利用正交分析，通过溶胶凝胶－超临界干燥及复合浸渍的方法制备了NiO/SnO2-ZrO2催化剂，进行了活性评价，考察了前驱物、NiO、SnO2含量及制备方法对催化剂活性及稳定性的影响，并采用XRD、TEM对催化剂进行了表征分析，结果表明：NiO/SnO2-ZrO2催化剂具有良好的甲烷燃烧催化性能（t100%=640 ℃），其活性、稳定性与制备参数密切相关，其中NiO含量是影响催化剂活性、稳定性的最主要参数，它对催化剂稳定性和活性的影响规律正相反； SnO2组分的添加使ZrO2单斜相稳定，对催化剂起到了良好的稳定化作用，发现当SnO2含量在6 mol％左右时，催化剂具有较好的稳定性；对于制备方法，在凝胶前加入活性组分有利于催化剂的高活性，而在凝胶后加入活性组分，则有利于催化剂保持较好的稳定性；活性组分前驱物对催化剂性能影响不大，采用Ni(NO3)2作为前驱物较为合适。     

Catalytic Combustion of Methane over CO1-xMgxO/Al2O3/FeCrAl Monolithic Catalysts

A series of CoxMgxO/Al2O3/FeCrAl catalysts （x=0-1） were prepared. The structures of the catalysts were characterized using XRD, SEM, and TPR analyses. The catalytic activity of the catalysts for methane combustion was evaluated in a continuous flow microreactor. The results indicated that the active washcoats adhered well on the FeCrAl foils. The phases in the catalysts were Co--xMgxO solid solutions, α-Al2O3, and γ-Al2O3. The surface particle size of the catalysts varied with variations in the molar ratios of Co to Mg. The Co component of the Co1_xMgxO/Al2O3/FeCrAl catalysts played an important role in the catalytic activity for methane combustion. In the Co1-xMgxO/AluO3/FeCrAl series catalyst （x=0.2-0.8）, the catalytic activity in terms of x was in the order of 0.5〉0.2〉0.8 under the experimental conditions. The presence of Mg in these catalysts could promote the thermal stability to a large extent. There were strong interactions between the Co1-xMgxO oxides and the AluO3/FeCrAl supports.