内部审核在计量体系中的作用

介绍内部审核制度在计量测试工作中的目的和作用，提出了内部审核工作应注意的事项，如内部审核工作计划的完整性，内部审核工作的有效性，管理者工作内容的全面性，以及后续工作的完善性。     

Investigation of thin-film electroluminescent structures on rough subsrates

Results of experimental investigations of the volt-brightness characteristics, frequency dependences of brightness, and the directional radiation pattern of electroluminescent MSDM, MSCM, and MSDCM emitters, where M stands for the first transparent and second nontransparent electrodes, S is a semiconductor, D is a thin-film dielectric, and C is a silicone-based composite liquid dielectric with a powdered segnetoelectric filler, developed on conventional “smooth” and rough glass substrates are presented. It is shown that electroluminescent structures on rough surfaces have a brightness approximately two times higher than that of similar structures developed on a “smooth” substrate. Ul’yanovsk State University, 42, L. Tolstoi St., Ul’yanovsk, 432700, Russia. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 4, pp. 507–512, July–August, 1997.     

非线性控制系统的最小实现

对于那些由代数微分方程描述的具有输入输出关系的非线性控制系统，本文采用两种方法讨论了其最小实现问题：一种方法是直接计算系统的特征列；另一种方法则采用了本原元定理．两种方法给出的最小实现所需的状态变量最小数目是相等的．文中的大量代数与微分运算则可利用数学机械化来完成     

Quality assurance for the analytical data of micro elements in food

The micro element content of food is an important quality index due to the action of these elements on human health. In this article, we discuss how to ensure the reliability of analytical data on micro elements in order to truly represent the condition of food. Sampling, treatment of the analytical sample, selection of the analytical method, standard solution, and certified reference material, blank test, calibration of the instrument and equipment, application of the quality control chart, assessment of the final analytical result, and quality assurance system are briefly described. Received: 5 July 2001 Accepted: 19 November 2001     

A novel specimen for investigating the mechanical behavior of elastomers under multiaxial loading conditions

In this paper we describe the design and manufacture of an axial-torsion test specimen, and provide relationships needed when conducting stress-strain characterization experiments with the specimen. The specimen is a short hollow cylinder of rubber bonded between two steel mounting rings, in which simultaneous axial and shear strains are produced via independently controlled axial and twist displacements. We present calculations for the strain-displacement and stress-load relationships, and strain energy density. These relationships have been established and validated via a combination of analytical and experimental techniques, and finite element analysis. We have investigated the extent and effects of strain and stress field non-uniformity in the test specimen. The specimen design is sufficiently simple that a closed-form expression for the strain-displacement relationship has been successfully developed.     

在可交换四元数空间中的双曲方程的特征边值问题

讨论了一阶和二阶双曲复方程的特征边值问题.对其中两种线性方程,分别在不同的情况下获得通解和可解条件.而对于拟线性的二阶双曲复方程,证明了解的存在性和唯一性.     

代数体函数的定理

本文定义并研究了代数体函数的加法．结合杨乐的方法,将仪洪勋联系重值的亚纯函数唯一性定理推广到多值的代数体函数．     

Euler characteristic and related measures for random geometric sets

By an elementary calculation we obtain the exact mean values of Minkowksi functionals for a standard model of percolating sets. In particular, a recurrence theorem for the mean Euler characteristic recently put forward is shown to be incorrect. Related previous mathematical work is mentioned. We also conjecture bounds for the threshold density of continuum percolation, which are associated with the Euler characteristic.     

Assessing contaminated hydrogen peroxide for safe storage and transportation using the FTAI

Hydrogen peroxide is a very versatile oxidizing agent, and it is also environmentally compatible considering that the products of its exothermic decomposition are oxygen and water.When kept in a clean temperature-controlled environment, the self-reaction (decomposition) rate is extremely low. However, it is well known that even a small amount of contamination will dramatically increase the reaction rate. This paper describes the use of the fast thermal activity interpreter (FTAI) instrument to examine the chemical reactivity of commercially available 50% hydrogen peroxide at two different temperatures (30 and 40°C) both with and without contamination. The results show that at 30°C a small amount of rust (330 ppm) increases the reaction rate of 50% hydrogen peroxide by a factor of 50. When the temperature is increased to 40°C, the reaction rate is further increased by almost a factor of four. The implication for reactivity management is that at this contamination level most practical vessel sizes would require emergency venting capability. An evaluation was then performed to determine the emergency venting requirement for the safe transportation or storage of the contaminated hydrogen peroxide. It was determined that for quantities of the material less than 5 gallons, conventional breather vents would be sufficient to accommodate the gas evolved. However, for larger quantities, a safety relief device would be needed. For example, for a 400-gallon tote bin at 40°C the required minimum vent area is estimated to be 4.3 in², corresponding to a minimum vent diameter of 2.3 inches.     

确定线性偏微分方程组可积系统的对合特征集方法

基于Ritt-Wu特征集方法和Riquier-Janet理论,给出一种将线性微分方程组化成简单标准形式的有效算法．该算法通过消去冗余和添加可积条件获得线性微分方程组的完全可积系统(有形式幂级数解)或不相容判定．该算法不仅适用于常系数的线性偏微分方程组,而且对于变系数(以函数为系数)仍然有效．作者还给出了完全可积系统判定定理及其严格证明．