Insights on the Lewis Superacid Al(OTeF5)3: Solvent Adducts,Characterization and Properties**

Preparation and characterization of the dimeric Lewis superacid [Al(OTeF₅)₃]₂ and various solvent adducts is presented. The latter range from thermally stable adducts to highly reactive, weakly bound species. DFT calculations on the ligand affinity of these Lewis acids were performed in order to rank their remaining Lewis acidity. An experimental proof of the Lewis acidity is provided by the reaction of solvent-adducts of Al(OTeF₅)₃ with [PPh₄][SbF₆] and OPEt₃, respectively. Furthermore, their reactivity towards chloride and pentafluoroorthotellurate salts as well as (CH₃)₃SiCl and (CH₃)₃SiF is shown. This includes the formation of the dianion [Al(OTeF₅)₅]²⁻.     

三维还原氧化石墨烯/β-环糊精复合物的合成及其电化学检测水中左氧氟沙星北大核心CSCD

成功构筑了β-环糊精修饰的三维还原氧化石墨烯复合材料(3D-rGO/β-CD),并对该复合材料进行扫描电子显微镜、傅里叶红外光谱、热重分析和拉曼光谱分析等一系列的表征,分析了其形貌和结构的特征。进一步将其修饰到玻碳电极(GCE)表面,构建了一种新型电化学传感器(3D-rGO/β-CD/GCE)。利用3D-rGO/β-CD/GCE电化学传感器,通过微分脉冲伏安法(DPV)对左氧氟沙星(LEV)进行了检测。其中,具有多孔结构的三维还原氧化石墨烯具有优异的导电性能、比表面积大、化学稳定性好等优良的性质,而修饰的β-环糊精能在其环形腔内与客体分子结合形成超分子包合物,进而可以对LEV进行有效识别。研究结果显示,在最优实验条件下,3D-rGO/β-CD/GCE对左氧氟沙星的检测具有较宽的线性范围(1~150μmol/L),且检测限可达0.33μmol/L,同时该修饰电极还表现出良好的选择性和稳定性。此外,成功将其应用于实际水样中LEV的检测,表明该传感器具有一定的应用潜力。     

聚乙烯/氧化铝复合材料形态、流变和力学性能

将聚乙烯（PE）和氧化铝（AO）熔融共混制得综合性能更好的PE/AO复合材料。通过对其进行流变分析、热力学性能分析、力学性能分析、导热性能分析和断面微观结构分析,探究AO质量分数对复合材料结构及性能的影响。结果表明,随着AO质量分数的增加,复合材料逐步转为脆性材料,其弹性模量、屈服强度、导热系数、储能模量同步增加;当AO质量分数为10%时,复合材料的断裂强度为18.2 MPa,综合性能最好。     

噻虫胺分子印迹电化学传感器的制备与应用EI北大核心CSCD

以噻虫胺为模板分子,通过恒电位沉积壳聚糖,在还原氧化石墨烯(RGO)修饰的玻碳电极表面制备了可特异性识别噻虫胺的分子印迹传感器。采用交流阻抗法(EIS)、差分脉冲伏安法(DPV)和循环伏安法(CV)对传感器的电化学性能进行表征,优化了电沉积时间、洗脱圈数、孵化时间及溶液pH等实验条件。在优化条件下,以K_(3)[Fe(CN)_(6)]作为电活性探针,DPV峰电流强度与噻虫胺浓度在1.0~1000 nmol/L范围内呈良好的线性关系,检出限0.46 nmol/L。将本方法应用于实际样品中噻虫胺的含量测定,加标回收率为97.6%~103.2%。     

石墨烯应用于样品前处理的研究进展

样品前处理技术在样品分析中发挥着越来越重要的作用,而对分析物的富集能力和对样品基体的净化程度主要取决于高效的样品前处理材料,所以发展高性能的样品前处理材料一直是该领域的前沿研究方向。近年来,各类先进材料已经被引入样品前处理领域,发展了多种高性能的萃取材料。由于独特的物理化学性质,石墨烯已在各个研究领域获得广泛关注,在样品前处理领域也发挥着重要作用。基于高的比表面积、大的π电子结构、优异的吸附性能、丰富的官能团和易于化学改性等优点,石墨烯和氧化石墨烯基萃取材料被成功应用于各种样品的前处理,对不同领域中多种类型分析物表现出优异的萃取性能。该论文总结和讨论了近3年来石墨烯材料(石墨烯、氧化石墨烯及其功能化材料)在柱固相萃取、分散固相萃取、磁性固相萃取、搅拌棒萃取、纤维固相微萃取和管内固相微萃取等方面的研究进展。基于多种萃取机理如π-π、静电、疏水、亲水、氢键等相互作用,石墨烯萃取材料能够高效萃取和选择性富集不同类别的目标分析物,如重金属离子、多环芳烃、塑化剂、雌激素、药物分子、农药残留、兽药残留等。基于新型石墨烯萃取材料的各种样品前处理技术与多种检测技术如色谱、质谱、原子吸收光谱等联用,广泛应用于环境监测、食品安全和生化分析等领域。最后,总结了石墨烯在样品前处理领域中存在的问题,并展望了未来的发展趋势。     

锰氧化物中氧空位的构建及其催化氧化苯系物作用机制研究进展

作为一种过渡金属氧化物,锰氧化物以其多晶型、储/释氧能力强、蕴含丰富氧物种、结构缺陷可控等优点被广泛应用于苯系物的热催化氧化。其中,具有众多特性的氧空位能有效促进苯系物的完全催化氧化,因而成为各界研究的焦点。我们综述了常见的氧空位构建方法及表征技术,并总结了在苯系物催化氧化过程中,锰氧化物中氧空位的几种重要作用机制对催化活性和抗水性能的积极影响。最后文章对氧空位构建新方法、形成机理、具体过程及其在锰氧化物热催化氧化苯系物领域中的应用进行了总结和展望。     

Synthesis and characterization of fluorine functionalized graphene oxide dispersed quinoline-based polyimide composites having low-k and UV shielding properties

Polyimide nanocomposites having low-k and UV shielding properties have been developed using fluorine functionalized graphene oxide and bis(quinoline amine) based polyimide. The polyimide was synthesized using bis(quinoline amine) and pyromellitic dianhydride at appropriate experimental conditions, and its molecular structure was confirmed through various spectral analysis such as FTIR and NMR. The polyimide (PI) composites were prepared using bis(quinoline amine), pyromellitic dianhydride, and separately filled with 1, 5, 10 wt% of fluorinated graphene oxide (FGO) through in situ polymerization. The polymer composites were characterized using thermo gravimetric analysis (TGA), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM). In addition, the water contact angle, dielectric behavior, and UV–Vis shielding behavior of FGO/PI composites were evaluated. The value of the water contact angle of the polyimide was increased with increment of FGO in the polyimide matrix. The highest water contact angle of polyimide composites observed 108° was obtained for 15 wt% FGO reinforced polyimide composite. The value of the dielectric constant for neat, 1, 5, and 15 wt% FGO reinforced polyimide composites was obtained as 4.5, 3.7, 2.6, and 2.0, respectively. It is also observed from by UV–Vis spectroscopy analysis that the FGO reinforced polyimide composites have good UV shielding behavior.     

A Comparison of Four Different Electrode Matrices on the Performance of Amperometric Hydrogen Peroxide (Bio)Sensors

A comparison of the analytical performances of four different (bio)sensor designs in H₂O₂ determination is discussed. The (bio)sensor designs developed were based on the use of (i) multiwalled carbon nanotubes (MWCNT), zinc oxide nanoparticles (ZnONP), prussian blue (PB); (ii) MWCNT, ZnONP, PB and ionic liquid (IL); (iii) MWCNT, ZnONP and horseradish peroxidase (HRP) and (iv) MWCNT, ZnONP, HRP and IL modified glassy carbon electrode (GCE). A performance comparison of (bio)sensors showed that the one based on HRP/IL-MWCNT-ZnONP/GCE showed the best analytical characteristics with a linear dynamic range of 9.99×10⁻⁸–7.55×10⁻⁴ M, detection limit of 1.37×10⁻⁸ M and sensitivity of 17.00 μA mM⁻¹.     

Graphene Nanocomposites Based Electrochemical Sensing Platform for Simultaneous Detection of Multi-drugs

Three reduced graphene oxide nanocomposites were employed to achieve the simultaneous electrochemical determination of multi-drugs including acetaminophen (ACTM), carbendazim (CB) and ciprofloxacin (CFX). All nanocomposite modified electrodes showed improved current responses for three drugs. Notably cauliflower-like platinum nanoparticles decorated reduced graphene oxide modified electrode (or Pt−RGO/GCE) exhibited the best performance in terms of electrochemical stability. Using Pt−RGO/GCE, the linear detect ranges of 30–120 μM, 25–115 μM and 10–25 μM, and detection limit values of 3.49, 2.96, and 1.53 μM were achieved for ACTM, CB and CFX respectively. The electrode was further used for the successful determination of above drugs in tap and river water using differential pulse voltammetry. From the obtained results, we believe that Pt-RGO/GCE is highly promising for the fabrication of robust electrochemical sensors for simultaneously determining ACTM, CB and CFX or similar types of drugs in the future.     

Progress in preparation,characterization, surface functional modification of graphene oxide: A review

Graphene oxide (GO) has become the focus of scientific research due to unique mechanical, optical, electrical and chemical properties. We review the synthesis approaches and formation mechanism of GO, and propose that the crucial factor to the preparation of GO is to find efficient and environmentally friendly oxidant. Various characterization techniques are introduced, and characteristics are summarized. The GO model theories are synopsized, and determining the structure of GO has important influence on its surface modification and its application and development in composite materials. The interaction and reaction types between GO matrix and modified molecules, as well as the properties of modified products were described. In conclusion, the present challenges and future research directions are presented in terms of preparation and surface functional modification for GO.