系数变号的半线性椭圆方程的正解

本文研究半线性椭圆方程Dirichlet问题-△u=α（x）f(u），x∈Ω， u（x）=0，x∈ЭΩ，正解的存在性，其中Ω为R^n中有界的带光滑边界的区域，α(x)可以变号。     

Finite Element Solution of Conical Diffraction Problems

This paper is devoted to the numerical study of diffraction by periodic structures of plane waves under oblique incidence. For this situation Maxwell's equations can be reduced to a system of two Helmholtz equations in R ² coupled via quasiperiodic transmission conditions on the piecewise smooth interfaces between different materials. The numerical analysis is based on a strongly elliptic variational formulation of the differential problem in a bounded periodic cell involving nonlocal boundary operators. We obtain existence and uniqueness results for discrete solutions and provide the corresponding error analysis.     

线性分式规划最优解集的求法

本文使用多面集的表示定理，导出了线性分式规划最优解集的结构，并给出确定全部最优解的计算步骤。     

The measurement of subcritical electroconvection

Under idealized conditions, electroconvection in a nematic liquid crystal sets in at a well-defined threshold of the driving ac voltage. Fluctuating convection rolls of a small amplitude below that threshold have been observed recently. The measurement of the amplitude of these fluctuations is described in detail in this paper. It is based on averaging the light intensity signals using the structure function and a quantitative analysis of the light deflection.     

A stability of the steady flow of compressible viscous fluid with respect to initial disturbance (v∞ ≠ 0)

We consider a compressible viscous fluid with the velocity at infinity equal to a strictly non‐zero constant vector in ?³. Under the assumptions on the smallness of the external force and velocity at infinity, Novotny–Padula (Math. Ann. 1997; 308 :439– 489) proved the existence and uniqueness of steady flow in the class of functions possessing some pointwise decay. In this paper, we study stability of the steady flow with respect to the initial disturbance. We proved that if H³‐norm of the initial disturbance is small enough, then the solution to the non‐stationary problem exists uniquely and globally in time, which satisfies a uniform estimate on prescribed velocity at infinity and converges to the steady flow in L_q‐norm for any number q? 2. Copyright © 2006 John Wiley & Sons, Ltd.     

改善光纤倒像器的对比度传递特性

光纤倒像器是一种特殊类型的光纤板，可将传递图像直接倒转180°并应用于像增强器。由于光纤倒像器的特殊结构，造成光纤随着距扭转轴心的距离增加，数值孔径和光通量逐渐下降。相对于光纤板，光纤倒像器在透过率和对比度传递特性上均有一定程度的下降。通过改进玻璃系统，在一定程度上降低芯皮玻璃间离子扩散和相互渗透的程度，可提高光纤倒像器的实际数值孔径；通过调节EMA吸收量，既能满足像增强器对光纤倒像器荧光屏透过率的要求，又能保证最大程度地吸收光纤中逸出的杂散光，提高对比度。选择合理的芯皮比，不仅可弥补因扭转拉伸造成的皮层厚度减薄，还可进一步增加皮层厚度，抑制光从光纤中逸出。通过以上改进，可改善光纤倒像器的对比度传递特性。     

基于平均和峰值灰度加权的自动调光系统

介绍了在CCD高速电视测量仪系统中，利用电子快门和可变光阑有机结合，在运动控制卡控制下实现自动调光，扩大了调光的动态范围.采用了平均灰度和峰值灰度加权的办法来获取反馈信号，有效的解决不同背景下自调光系统的适应性.提出了基于二次函数的调光反馈量计算方法，提高了调光过程中的收敛速度，同时也保证了系统有较小的超调量.     

一类相空间中的准几率分布函数系

定义了一类相空间中的准几率分布函数系，这个准几率分布函数系直接建立在具有更加广泛意义的量子相空间Schr?dinger方程解的基础之上，其中定义_α=αp-i?q和_α=(1-α)q+i?p.发现了两个有趣的关系.(1)建立的量子相空间Schr?dinger方程的解实际上是对函数φ(λ)exp［i(1-α)qp］做窗口Fourier变换.(2)这个窗口函数g(λ)起着选择窗口形式的作用，而且不同的窗口对应着不同的分布函数.当g(λ)是一个代表Gauss窗的Gauss函数的时候，准几率分布函数就是一个类似于Husimi的分布函数f^HL_α(q,p)；当g(λ)是一个表示椭圆的复函数时，准几率分布函数就是一个椭圆分布函数f^E_α(q,p)；再在g(λ)为复函数的基础上附加α=0，就可得到标准序分布函数f^S(q,p)、反标准序分布函数f^AS(q,p)和Wigner分布函数f^W(q,p)，此时g(λ)表示高度为1/12π?而长度为λ的矩形窗. 关键词： 窗口Fourier变换 相空间 Wigner分布函数     

光学低通滤波器的光学传递函数分析

光电成像系统的抽样过程会引起图像频谱在频谱空间上的多次复制,如果抽样过程不满足系统的奈奎斯特条件,相邻的频谱项就会产生混叠.光学传递函数可以反映系统中光学成像,抽样和重建等各个过程对图像信号频谱的响应.通过对使用光学低通滤波器(OLPF)光电成像系统的光学传递函数的分析,表明光学低通滤波器可以有效地限制图像的频谱宽度,使抽样满足奈奎斯特条件,达到消除频谱混叠,改善重建图像质量的目的.     

Comparison of growth stress measurements with modelling in thin iron oxide films

High temperature oxidation of metals leads to residual stresses both in the metal and in the growing oxide. In this work, the evolution of this residual stresses is theoretically predicted in the growing oxide layers. The origin of these stresses is based on a microstructural model. Using experimental results providing from the oxidation kinetics, and an analysis proposed to describe the growth strain occurring in the thin layers, a set of equations is established allowing determining the stresses evolution with oxidation time. Then, the model is compared with experimental results obtained on both α-Fe and phosphated α-Fe, oxidised at different temperatures. Numerical data are extracted from experiments either with an asymptotic formulation or with an inverse method. These two methods give good agreement with experiments and allow extracting the model parameters.