The Properties of Light Pressure Force with High Order in Laser Fields

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｉｎｒｅｃｅｎｔｙｅａｒｓ,ｂｏｔｈｔｈｅｔｈｅｏｒｅｔｉｃａｌａｎｄｅｘｐｅｒｉｍｅｎｔａｌｉｎｖｅｓｔｉｇａｔｉｏｎｓｏｎｌａｓｅｒｃｏｏｌｉｎｇａｎｄｔｒａｐｐｉｎｇｈａｖｅｂｅｃｏｍｅｏｎｅｏｆｔｈｅｍａｊｏｒｆｉｅｌｄｓｉｎａｔｏｍｉｃ,ｍｏｌｅｃｕｌａｒａｎｄｏｐｔｉｃａｌ ｐｈｙｓｉｃｓ[1～ 8] .Ｔｈｅｄｅｖｅｌｏｐｍｅｎｔｏｆｌａｓｅｒｃｏｏｌｉｎｇａｎｄｔｒａｐｐｉｎｇｔｅｃｈｎｏｌｏｇｙｉｓｉｍｐｏｒｔａｎｔｆｏｒｔｈｅａｐｐｌｉｃａｔｉｏｎｓｓｕ…     

狭缝式高速摄影机胶片的计算机判读

根据狭缝摄影机胶片的成象原理,运用数字图象处理技术,对狭缝式高速摄影机胶片判读工作的计算机化进行研究.应用结果表明,该技术先进实用,极大地提高了判读的精度和效率,将是这种胶片判读技术的发展方向.     

CCD摄像机大视场光学镜头的设计

为提高CCD摄像机的成像质量，同时使镜头结构紧凑、小型化，在大视场光学镜头的设计中，引入标准二次曲面和偶次非球面。根据初级像差理论，分析了非球面的位置、初始结构参数的求解规律。通过理论计算和ZEMAX光学设计软件的优化，给出工作波长为0.4～0.7μm、全视场角为80°，相对孔径为1∶1.5的镜头设计实例。该镜头由7块镜片组成，包括一个标准二次曲面和两个8次方非球面；在40lp/mm空间频率处的MTF值超过0.85，全视场畸变小于3％，像质优良     

氮化铝薄膜的光学性能

分别使用X衍射仪和紫外（190 nm～800 nm）分光光度仪,测量了用分子束外延法生长在SiC（001）基底面上的AIN薄膜的X衍射、透射谱和不同温度下的吸收谱.X衍射表明:实验所用的AIN薄膜在c-轴存在应变和应力，该应变和应力主要是由于AIN的晶格常量与基底SiC的晶格常量不匹配所致.透射谱表明:AIN薄膜的禁带宽度大约为6.2eV；而其对应的吸收谱在6.2eV处存在一个明显的台阶,此台阶被认为是AIN薄膜中的带边自由激子吸收所产生,忽略激子的结合能(与禁带宽度相比),则该值就对应为AIN的禁带宽度.而其对应的不同温度下（10 k～293 k）的吸收谱的谱线的形状和位置无明显的变化表明:温度对AIN薄膜的禁带宽度亦无明显的影响，这主要是由于在AIN薄膜中存在着应力所致.     

基于特征圆单目视觉的飞机舵面角位移标定技术

提出了一种基于特征圆单目视觉的非接触式飞机舵面角位移标定技术。用一台数码摄像机对固定在飞机舵面上的特征圆进行拍照,经数字图像处理后确定五个特征点的坐标,利用针孔成像和射影变换原理建立物像空间坐标解算模型,计算出特征圆的法线相对方向和圆心的相对位置,舵面角位移由该圆的法线方向确定。仿真结果表明,该方法具有标定过程简单、实时、快速和准确的特点,标定精度可达到0.1°。该技术也可用于航天器上实时测量交会对接时的相对位姿参数。     

BEPC中电子云导致的束团横向尺寸增长研究

多束团正电子储存环中可能发生电子云不稳定性. 由于电子云导致的束团横向尺寸增长已经成为提高对撞机对撞亮度的主要限制因素之一. 介绍了在BEPC储存环中, 利用条纹相机直接测量由于电子云导致的束团横向尺寸增长结果, 并与模拟计算进行了比较.     

Experimental identification of physical parameters of fluid-filled pipes using acoustical signal processing

A method is formulated for the identification of an unknown physical parameter of a fluid-filled pipe using the measurement of sound speed in the pipe. The method uses a simple formula which provides the relationship between the sound speed and a few physical parameters of the pipe: thickness, diameter, wall material constants and fluid constants. Once the sound speed in the pipe is measured, the simple formula can be used to extract one of the unknown parameters providing the remaining ones are known.The sound speed in the pipe is measured using a 3-transducer array. In order to demonstrate the potential of the technique the results of several measurements obtained in a water-filled steel pipe are presented.The required accuracy of the measurement of sound speed and of the specification of known parameters is analysed. The accuracy depends on the unknown parameter which is to be identified. For example, if the pipe thickness is the unknown parameter, the other parameters have to be known within a very narrow margin of error. On the contrary, if the fluid properties have to be identified the needed accuracy of known parameters gets much lower.     

Review and complements on mixed-hybrid finite element methods for fluid flows

Mixed and hybrid finite element methods for the resolution of a wide range of linear and nonlinear boundary value problems (linear elasticity, Stokes problem, Navier–Stokes equations, Boussinesq equations, etc.) have known a great development in the last few years. These methods allow simultaneous computation of the original variable and its gradient, both of them being equally accurate. Moreover, they have local conservation properties (conservation of the mass and the momentum) as in the finite volume methods.The purpose of this paper is to give a review on some mixed finite elements developed recently for the resolution of Stokes and Navier–Stokes equations, and the linear elasticity problem. Further developments for a quasi-Newtonian flow obeying the power law are presented.     

高功率微波高斯馈源口面场分析

 用波导本征模展开方法对用于高功率微波发射系统的方角锥高斯馈源口面场进行分析，提出结合馈源远场辐射特性和避免高功率击穿折衷选定相应的高斯模注腰半径，进而确定多个波导模幅值，从而为运用模匹配或耦合波理论设计高斯馈源提供依据。     

数码相机引入科技照像实验

介绍了数码相机的系统结构和工作原理，通过与传统相机的对比分析，在科技照相实验中应该使用数码相机。