HL-2M 装置冷却水系统介绍

介绍了 HL-2M 装置冷却水系统的组成以及各子系统的循环流程、运行原理和运行参数。      

Waterproof Light-Emitting Metal Halide Perovskite–Polymer Composite Microparticles Prepared via Microfluidic Device

Waterproof light-emitting perovskite–polymer composite microparticles are synthesized by a continuous one-step microfluidic reactor, which enables in situ production of metal halide perovskite nanoparticles (MHP-NPs) by the ligand-assisted reprecipitation process (LARP) and the encapsulation of MHP-NPs by UV cross-linking polymerization in the microfluidic channel. Successful encapsulation of MHP-NPs in polymer microparticles is attributed to the co-dispersion of an LARP solution and UV polymerizable solution in an aqueous continuous phase within the microfluidic channel, in which N,N-dimethylformamide, in co-dispersion droplets, is continuously extracted to the aqueous medium upon UV polymerization. MHP-NPs–polymer composite microparticles show enhanced stability against air and moisture.     

Speciation of Arsenic in Drinking Water by Dispersive Liquid–Liquid Microextraction,Graphite Furnace Atomic Absorption Spectrometry,and Orthogonal Array Design

Orthogonal array design was used to optimize arsenic speciation in drinking water in contact with materials by dispersive liquid–liquid microextraction followed by graphite furnace atomic absorption spectrometry. Arsenic speciation was achieved by the formation of an arsenic(III) hydrophobic complex with a new chelating agent, 1,2,6-hexanetriol trithioglycolate, at neutral pH. The complex was extracted into the organic phase, while arsenic(V) remained in aqueous solution. The concentration of As(V) was determined by subtracting As(III) from the total arsenic following the reduction of As(V) to As(III) by L-cysteine. Orthogonal array design with OA₁₆ (44) and OA₉ (33) matrices was used to optimize the efficiency of dispersive liquid–liquid microextraction and the reduction of As(V) to As(III), respectively. Under the optimal conditions, the detection limit was 0.03?µg?L^?1 for As(III) and the relative standard deviation was 5.9% with an enhancement factor of 87. The calibration curve was linear from 0.19 to 3.0?µg?L^?1 with a correlation coefficient of 0.9996. The developed method was used for arsenic speciation in solutions of drinking water that contacted materials. The recoveries of fortified samples were in an acceptable range from 92.0 to 113.3%.     

Supercritical Fenton Oxidation: A New Method for Total Organic Carbon Measurement

A new method for total organic carbon (TOC) measurement was established based on supercritical Fenton oxidation. The organic pollutants in wastewater were oxidized to carbon dioxide in supercritical water by Fenton reagents that was detected using a nondispersive infrared detector. The influence of temperature from 380 to 480°C, oxidant coefficient from 1 to 20, pH from 2.2 to 5.2, and Fe²⁺ concentration from 0.2 to 0.8?mg?L^?1 was characterized; the optimal conditions were at 420°C, an oxidant coefficient n?≥?5, a pH of 4.4, and Fe²⁺ concentration of 0.8?mg?L^?1. Using these parameters, the recovery of potassium hydrogen phthalate exceeded 98.2%. The introduction of Fenton oxidation based on supercritical water lowered the temperature and reduced the oxidant coefficient required for TOC determination.     

Multi-centred hydrogen bonds between water and perchlorate anion

Results of classical molecular dynamics simulations are presented for the re-orientational dynamics of water hydrogen bonded to perchlorate anion. Different mechanisms of bond formation are presented. Due to its regular tetrahedron geometry the perchlorate anion can make classical as well as bifurcated and trifurcated hydrogen bonds. The angular variation of water in the first solvation shell of perchlorate suggests the transitional character of multi-centred hydrogen bonds. As a result water molecules can slide around the anion.     

Mechanistic insights on DBU catalyzed β‐amination of nbs to chalcone driving by water: Multiple roles of water

DFT calculations were conducted to pursue deeper understandings on the mechanism and the explicit role of trace water in the DBU‐catalyzed β‐amination of NBS to chalcone. Being different from previously proposed by Liang et al., a cooperative participation of both DBU and water is noticed in the preferred mechanism. The preferential mechanistic scenario assisted by water undergoes three major steps: the formation of succinimide and HBrO, concerted nucleophilic addition and H‐shift, and keto‐enol tautomerization. Moreover, we found that DBU‐HBrO is unnecessary in the third step and three‐water‐cluster assisted keto‐enol tautomerization is the most advantageous case. It is further noted that the catalytic position of the third water molecule and the proton shift orientation to some extent affect step 3 via O···H O and O H···π interactions, which is confirmed by AIM analysis. The computational results suggest that water molecules play pivotal roles as reactant, catalyst, and stabilizer to promote the reaction of chalcone and NBS. The origin of the more stable transition state structure in the rate‐determining step of DBU‐water catalyzed mechanism is ascribed to noncovalent interactions, halogen bond, and electrostatic interactions than DBU only ones. © 2017 Wiley Periodicals, Inc.     

紫外光谱法结合化学计量学用于环境水样中2,4,6-三硝基甲苯及其分解物的同时测定

结合紫外吸收和偏最小二乘法建立了环境水样中2,4,6-三硝基甲苯及其分解物的分析方法,在不经过任何预先分离的情况下,实现了环境水样中2,4,6-三硝基甲苯(TNT)及其分解物2,4-二硝基甲苯(2,4-DNT)和2,6-二硝基甲苯(2,6-DNT)的快速准确测定.采用正交试验设计(OAD)配制了25个训练集样本和15个独立预测集样本,采用变量种群分析(VCPA)方法挑选特征变量以提高偏最小二乘法(PLS)模型的预测效果,预测集中每个物质的相关系数R2均达到0.99.将最优的VCPA模型用于真实水样中TNT以及DNT的检测,并采用HPLC方法进行了验证.实验结果显示,VCPA模型的回收率与HPLC法相近.紫外光谱法结合化学计量学方法可作为环境体系中多成分同时测定的一种简便、快速、有效的方法.     

在FTO导电玻璃上电化学沉积高效可见光光电化学分解水Cu2O/g-C3N4异质结膜

近几十年来,光电化学分解水制氢作为一种洁净的、能持续利用太阳能的技术受到极大关注.在众多光催化材料中,p型半导体氧化亚铜(Cu2O)被认为是最有前途的可见光光电分解水材料之一.理论上,它的光能转换为氢能的效率可达到18.7%.然而,目前所报道的Cu2O光转换效率远远低于此值;同时,纯Cu2O在光照条件下的稳定性较差.研究表明,Cu2O与其它半导体复合可以增强其光电转换效率和提高稳定性.如Cu2O和能带匹配的石墨相氮化碳(g-C3N4)复合后,光催化性能和稳定性都有较大提高.但目前所报道的Cu2O/g-C3N4复合物几乎都是粉末状催化剂,不便于回收和重复使用.本文首先采用电化学方法在FTO导电玻璃上沉积Cu2O薄膜,采用溶胶凝胶法制备g-C3N4纳米颗粒材料,然后采用电化学法在Cu2O薄膜表面沉积一层g-C3N4纳米颗粒,得到了Cu2O/g-C3N4异质结膜.分别利用X射线粉末衍射(XRD)、高分辨透射电子显微镜(HRTEM)、扫描电子显微镜(SEM)、紫外可见光谱(UV-Vis)和光电化学分解水实验分析了Cu2O/g-C3N4异质结的组成结构、表面形貌、光吸收性能及催化剂活性和稳定性.XRD和HRTEM表征显示,本文成功合成了Cu2O/g-C3N4异质结材料,SEM图表明g-C3N4纳米颗粒在Cu2O表面分布均匀,大小均一.可见光光电化学分解水结果显示,异质结薄膜的光电化学性能比纯的Cu2O和g-C3N4薄膜材料有极大提高.当在Cu2O表面沉积g-C3N4的时间为15 s时,得到样品Cu2O/g-C3N4-15异质结膜,其在–0.4 V和可见光照射条件下,光电流密度达到了–1.38 mA/cm2,分别是纯Cu2O和g-C3N4薄膜材料的19.7和6.3倍.产氢速率也达到了0.48 mL h–1 cm–2,且产氢和产氧的速率之比约为2,说明此异质结材料在可见光作用下能全分解水.经过三次循环实验,光电化学分解水的效率仅降低10.8%,表明该材料具有良好的稳定性.根据UV-Vis表征和光电化学性能对比,Cu2O/g-C3N4-15的光电性能最好,但其光吸收性能并不是最好,说明光电化学性能与光吸收不是成正比关系,主要是由于Cu2O和g-C3N4两个半导体相互起到了协同作用.机理分析表明,Cu2O/g-C3N4异质结薄膜在光照下,由于两者能带匹配,Cu2O的光生电子从其导带转移到g-C3N4的导带上,g-C3N4价带上的空隙转移到Cu2O的价带上,从而降低了光生电子和空隙的复合,提高了其光催化性能.由于g-C3N4的导带位置高于H2O(或H+)还原为H2的电势,Cu2O的价带位置低于H2O(或OH–)还原为O2的电势,所以在外加–0.4 V偏压和可见光照射条件下,Cu2O/g-C3N4能全分解水,光生载流子越多,光电化学分解水的速率越大.综上所述,在Cu2O薄膜上沉积g-C3N4后得到的异质结薄膜具有高效的光能转换为氢能性能.     

Switchable solvent based liquid phase microextraction of palladium coupled with determination by flame atomic absorption spectrometry

A switchable solvent-based micro-extraction method for pre-concentration and separation of ultratrace palladium was developed prior to its flame atomic absorption spectrometric detection. Reverse change of hydrophilicity of N,N-dimethylcyclohexylamine (DMA) was achieved by reaction with carbonated water. The hydrophilic bicarbonate salt of the protonated DMA was used as extractant for palladium complexed with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP). Formation of the hydrophobic form of switchable solvent from hydrophilic form of switchable solvent phase was achieved by addition of sodium hydroxide into the extractant-sample solution. The effect of key parameters affected extraction recovery was studied and optimised by using Plackett–Burman design, central composite design and three dimension (3D) surfaces response. The calibration plot was linear in the range 0.015–1.6 mg L^?1 of palladium with a correlation coefficient of 0.999. The limit of detections values of palladium for liquid and solid samples were 4.28 μg L^?1 and 0.54 µg g^?1, respectively. The pre-concentration factor was 37.5. The accuracy was confirmed by determination of palladium in certified reference material. The procedure was also applied for determination of palladium content of real samples as automotive catalytic converter, roadside dust, sea water and river water.     

The wave attenuation on the mud bed

In the paper the wave attenuation in a two layer fluid system is studied. The fluid in the top layer is ideal and that in the lower layer is the Voigt model of the viscoelastic medium. A dispersion relation is derived and the rate of the wave decay is computed. The approximate explicit expressions of the decay rate for different water depth are given, where the viscoelasticity is either very large or very small. Compared with the numerical results, our results are very accurate, which can be used by an engineer. The project supported by the National Natural Science Foundation of China and by the Lianyungang Port Office, China