CeO_2负载多孔碱激发钢渣基催化剂的制备及其光催化性能

固体废弃物高附加值利用是资源可持续发展的重要途径之一,创新性的提出了以丙烯酸树脂乳液为孔形成剂,对碱激发钢渣基胶凝材料的孔结构进行调变,制备出新型多孔碱激发钢渣基胶凝材料,采用初湿浸渍法合成了一种新型的CeO_2负载的多孔钢渣基催化剂。利用XRF,XRD,BET,UV-Vis DRS等手段对光催化剂的组成、结构及光谱性能进行了表征,评价了其光催化分解水制氢活性。结果表明:孔形成剂的加入,改变了碱激发钢渣基胶凝材料的孑L结构,其介孔体积增加了70.27%,负载8 Wt%CeO_2的光催化剂介孔体积增加了144.14%。在模拟太阳光源辐照6 h后,负载8 Wt%CeO_2的光催化剂的最高产氢活性(7 653μmol·g~(-1))和产氢速率[1 275.5μmol·(g·h)~(-1)]归因于介孔体积增加了水分子的传质速率以及高分散的CeO_2活性组分与载体中FeO形成的耦合半导体促进了光生电子-空穴对的高效分离。     

A fully generalised approach to modelling fire response of steel–RC composite structures

A three-step model for the performance-based numerical simulations of the fire response of steel–RC two-layered beam-like composite structures is presented and validated. The first step consists of the determination of the evolution of temperatures in the structure׳s surroundings. Moisture and the heat transfer through the RC layer and the conduction of heat over the steel layer are obtained in the second step. In concrete, the transfer of water vapour, dry air, and free water is discussed as well as the evaporation and liquefaction phenomena and the dehydration of concrete and its thermal and mechanical degradation. Within the framework of the third step, a geometrically and materially non-linear mechanical response of the structure is proposed accounting for interlayer slips and uplifts as well as for various material-related phenomena such as the material hardening/softening and creep. The governing equations are solved numerically. An efficient, novel strain-based finite element formulation is introduced for the mechanical analysis. Due to its generality and consideration of several different possible non-linear material, geometrical, and interlayer contact phenomena and their couplings the model can be of a use to a broader fire science community for exploring the impact of different physical parameters on the results of the addressed numerical simulations, thereby providing directions for further research. In the paper a case of such a study is also demonstrated exploring the contribution of the steel sheet and the flexibility of the interlayer connection of a standard trapezoidal steel–RC slab to its ultimate fire resistance. A reasonable contribution of the sheet is proved if the stiffness ratio between the integrated and the external tensile reinforcement of the RC plate is low provided that the contact connection is sufficiently stiff.     

氢化物发生原子荧光法测定钢铁中微痕量碲

碲是钢铁的微痕量有害杂质,易引发晶间脆化和微裂纹,降低材料的力学与抗疲劳性能,危及船海装备的服役安全,需要准确快速的检测和控制。原标准方法GB/T 223.55—2008《钢铁及合金 碲含量的测定 示波极谱法》使用滴汞电极,存在局部汞富集与危及人员健康和水体环境的风险。伴随《关于汞的水俣公约》在国内外的全面生效,该方法已于2017年废止。钢铁中碲的检验迫切呼唤绿色环保、准确快速的分析方法。基于碲可被新生态氢还原为易挥发氢化物的特点,采用氢化物发生进样技术从基体溶液中高选择性地分离和富集碲,并联用原子荧光法测定钢铁中微痕量碲。实验优化了负高压、灯电流、观察高度、载气流量、屏蔽气流量等光谱仪的工作参数,研究确定了消解用酸、试液介质、溶液酸度、载流酸度与硼氢化钾浓度等氢化物发生条件,系统考察了铁基体与铬、镍、锰、铜、钼、钨、钛、硅、钒等共存离子的干扰效应及掩蔽方法。确定的条件参数如下,负高压：360 V,灯电流：70~80 mA,观察高度：7~8 mm,载气流量：700 mL·min-1,屏蔽气流量：700~800 mL·min-1,试液介质：15%盐酸,掩蔽剂：2%硫脲-抗坏血酸,硼氢化钾浓度：1.5%~2.5%。称取0.080 g钢铁试样,加入3.00 mL王水低温加热至溶解完全,加入20.00 mL 10%硫脲-抗坏血酸混合溶液,并用15%盐酸定容至100 mL。采用基体匹配法,以铁基体溶液建立校准曲线,校准曲线呈二次方程,相关系数为0.999。方法的定量限为1.25 μg·g-1,测定结果的相对标准偏差（RSD）不大于7%,合成样品的测定结果与理论值相符,偏倚小于GB/T 223.55—2008规定的允许差。该方法具有灵敏、准确、快速、绿色的优点,可用于船海用钢中微痕量碲的检测。     

Q345低周疲劳性能与疲劳寿命预测分析

本文对结构用钢Q345的低周疲劳性能进行了试验研究。试验在常温下岛津电液伺服疲劳试验机上进行,采用轴向应变控制方法,恒定应变速率为0.005s-1,应变比为-1。试验结果表明,初始阶段,Q345在高应变幅值(0.6%)循环作用下出现循环硬化效应,而在低应变幅值(0.6%)作用下出现循环软化效应;随着加载应变幅的增加,硬化和软化率呈直线上升趋势。Q345疲劳裂纹萌生阶段占其整个寿命的60%以上,其裂纹萌生寿命与应变幅存在幂函数关系。根据Coffin-Manson公式得到了Q345的应变-寿命关系公式;采用能量预测法得到了材料的塑性应变能与疲劳寿命的关系表达式。上述结果对钢结构的设计、评估具有重要的工程应用参考价值。     

分光光度法快速测定碳钢中的硅、锰和磷

通过一次称量、溶样,采用分光光度法分别测定了普碳钢及低合金钢中硅、锰、磷的含量。实验表明,该方法操作简便、快速、准确度高,重现性好。     

Dynamic Deformation Behavior of a Golf Ball during Normal Impact

The normal impact between a golf ball and a rigid steel target was studied to examine ball deformation and the contact force during the impact. Using high-speed video images, the normal and tangential compression ratios of the ball were measured to analyze the ball deformation quantitatively. In addition, the inbound and rebound ball velocities, contact time, and coefficient of restitution were determined as basic parameters of the impact. As the inbound ball velocity increased, the maximum normal compression ratio increased while the maximum tangential compression ratio, contact time and coefficient of restitution decreased. The ball center displacements during the impact were measured to determine the ball center velocity and acceleration, and the contact force was calculated by the product of the mass and acceleration. The contact force increased almost linearly with the inbound ball velocity, and its relationship agreed well quantitatively with the results from a load-cell, and also agreed well qualitatively with Hertz contact theory.     

Flat ended projectile penetrating ultra-high strength concrete plate target

Reactive powder concrete (RPC), a composite that has been developed in recent years, is a special mixture that is cured to have a higher compressive strength than that of concrete (about 200 MPa). Adding a few steel fibers can markedly increase its mechanical properties, such as tensile and bending strength, impact resistance and toughness. Hence, RPC is highly promising for use in the containment structures of nuclear power plants and in the protection of military facilities. This study evaluates the resistance of ultra-high strength concrete targets by high-velocity impact experiments. Test variables include the impact velocity and the amount of steel fibers added. The experimental results reveal that RPC plates, because of their higher compressive strength, are more fragile than normal concrete (NC) plates. However, adding a small amount of steel fibers significantly improved the impact resistance of the target plates. Moreover, a numerical simulation based on the nonlinear finite element code LS-DYNA was performed. The results of the numerical simulation have a good agreement with the experimental data and can be used for further research.     

Prediction of elastic strain recovery of a formed steel sheet considering stiffness degradation

The aim of this work is to show first, how the springback of a steel sheet drawn part is affected by the stiffness degradation, as it results from the damage evolved during forming process, and second, to build a respective modeling approach to take this degradation into account. For the consideration of the orthotropic elastic properties degradation we develop an approach, based on the Mori-Tanaka theory, where damage is considered by inclusion of ellipsoidal cavities. The respective void shape evolution is proposed to be identified with the measurements of elastic modulus in two perpendicular directions during the uniaxial tensile test of a flat specimen at different loading stages. The proposed approach is coupled with the Gurson-Tvergaard-Needleman (GTN) plastic potential, though it could be substituted by almost any other continuum damage model. At the end the presented approach is experimentally validated by a simple springback test, developed by authors. A very good agreement between by calculation predicted and measured springback amount is observed.     

钢铁及合金中钨测定的高氯酸氧化法

在磷酸介质中,冒烟高氯酸氧化钨成高价,并消除溶液中存在的还原物质的影响,用氯化亚锡及三氯化钛还原铁和钨,约3．6mol／L盐酸介质中,硫氰酸铵与钨（V）生成黄色络合物,通过测其吸光义可定量测定钨含量。由于较多量冒烟高氯酸的氧化作用,还原不需铁作催化剂,消除了基体铁的影响。测定质量分数范围为0．05％－10％。     

电炉渣超微粉改性生物质废弃物制备生态活性炭的光谱学分析

利用木材、竹子、等其他生物资源制备具有发达多孔结构与丰富比表面积的活性炭,存在生产成本较高、不利于生态环境的可持续发展、使用寿命短和失效后容易造成室内环境二次污染的问题。冶金固体废弃物与生物质废弃物是工业生产与农业生产主要的副产品,因利用难度大、附加值低且成本高,导致大量堆放和填埋,不仅造成生态环境的污染,而且极大的浪费潜在资源。面对上述问题,利用冶金固体废弃物与生物质废弃物开发一种价格低廉且性能优越的生态活性炭,既是冶金固体废弃物与生物质废弃物的高附加值利用与资源可持续发展的重要途径之一,也是大幅降低改性活性炭生产成本与提高经济效益的重要途径之一。以核桃壳与电炉渣为研究对象,利用电炉渣中含有的金属氧化物对生物质废弃物进行改性处理制备用于甲醛降解的生态活性炭,依据《室内装饰装修材料人造板及其制品中甲醛释放限量》(GB18580-2017)对生态活性炭性能进行测试。利用X-射线光电子能谱(XPS)对元素含量进行测试与分析,X-射线荧光光谱仪(XRF)对化学成分进行测试与分析,傅里叶变换红外光谱仪(FTIR)对结构组成进行测试与分析,X-射线衍射仪(XRD)对矿物组成进行测试与分析,扫描电子显微镜(SEM)对微观结构进行测试与分析,激光粒度仪(LPSA)对粒度分布进行测试与分析和比表面积及孔径测定仪(BET)对孔结构进行测试与分析,以揭示核桃壳与电炉渣制备生态活性炭的机理,以及生态活性炭对甲醛的降解机理。结果表明:核桃壳超微粉与电炉渣超微粉进行复合制备具有良好降解甲醛性能的生态活性炭,不仅实现了冶金固体废弃物与生物质废弃物的高附加值的利用,而且提出了"以废治危"的新室内空气甲醛治理理念。电炉渣超微粉较好的被包裹于生态活性炭层状结构中,提高生态活性炭的粉化率,形成粒径较小的颗粒,有利于提高生态活性炭与甲醛的降解作用面积。电炉渣超微粉中含有Fe元素、Mn元素与Ti元素,Fe元素具有磁性促使大量甲醛在生物质活性炭孔结构表面形成富集,Mn元素与Ti元素对已经富集的甲醛进行催化降解,实现吸附降解与催化降解的协同作用。