介电高弹聚合物理论

软材料受刺激会发生变形, 该变形会引起相应的功能, 这种材料称为活性软材料(soft active material, SAM). 本综述主要讨论介电高弹聚合物这一类活性软材料. 当介电高弹聚合物薄膜受到厚度方向的电压作用时, 薄膜厚度减小同时面积增大, 可导致超过100{\%}的应变. 介电高弹聚合物作为转换器被广泛应用, 包括柔性机器人、智能光学器件、盲文显示屏、发电机等. 本文综述了建立在连续介质力学和热力学框架内的、并且基于分子理论描述和经验观测的介电高弹聚合物理论. 该理论耦合了大变形和电势, 描述了非线性和非平衡行为, 如力电失稳和黏弹性. 采用该理论能够通过有限元方法模拟实际构型的转换器, 计算力电能量转换的效率, 给出电致大变形的可行途径. 该理论有助于材料和器件设计.     

An instrumentation system to measure the loads acting on the tractor PTO bearing during rotary tillage

Application of rotary tillage has been increased due to less tillage passes required, reduced draft, and greater efficiency through reduction in wheel slippage. Early failure of the bearing of tractor power take-off (PTO) shaft was observed in tractors of power range 30–35 horsepower during rotary tillage. An instrumentation setup involving an extended octagonal ring transducer (EORT) was developed and installed at the bottom of the bearing to measure the axial load and the vertical component of the radial load. The horizontal component of radial load was measured by strain gauges. Based on measured loads, the bearing life was assessed. Independent variables were: operating depth, number of blades, gear setting, engine speed, and tyre size. The average axial and radial loads varied from 786–3869 N, and 134–430 N, respectively. However, bearing experienced very high peak loads during each trial. The peak axial and radial loads was recorded between 1081–7534 N and 566–1794 N, respectively. The estimated bearing life based on peak loads was 171.98–28341.39 h. Based on the findings, it may be concluded that the average loads were not sufficient to cause quick failure of PTO bearing, rather sudden peak loads might be the root cause of early failure.     

多极子阵列声波成像测井技术研究*

多极子阵列声波成像测井已经成为测井中主要方法之一,在地层评价与油气田开发中有重要作用。在已有理论与数值模拟的基础上,经过近十年的技术攻关,我们已经在多极阵列声波成像仪器制造、测试与数值处理等主要关键技术方面都取得了长足的进展,具体包括高温正交偶极子发射换能、高温低频单极子换能器、声系测试、多极子阵列声波测井高温电路及仪器集成、资料处理及解释等主要方面。所研制的仪器及资料处理方法,经过与国外同类仪器的测井结果进行了对比分析,验证了所研发的仪器的可靠性和处理方法的正确性,这些关键技术为我国声学测井仪器装备技术研发和快速发展打下了基础,提供了技术支撑。     

基于最小电压法的超声换能器谐振频率自动跟踪*

首先分析了最大电流法跟踪超声换能器谐振频率的原理及应用范围。研究了基于由串联电感和并联电容匹配电路下,不同频率时换能器两端电压电流的变化规律。研究表明在串联电感和并联电容匹配电路下发生谐振时,换能器两端的电压最小而电流并非最大。由此形成了采用最小电压法跟踪谐振频率的自动跟踪策略,并给出了该方法的具体实施步骤。论文研究结果为换能器谐振频率的自动跟踪方法提供了新的选择。     

过模波导器件的迭代设计方法

从模式保留和转换的角度, 过模波导器件可分为模式转换器、模式保留器和模式综合器. 传统方法只解决其中一种器件的设计或者对器件的某个指标进行改进. 本文在深入分析耦合波理论之后, 提出了过模波导器件的迭代设计方法, 从原理上解决了过模波导器件的设计问题. 该方法能够统一设计三类过模波导器件, 通过添加不同的结构控制方法, 可得到转换效率更高、带宽更宽、结构更紧凑、满足不同工程需求的器件, 而且还能有效设计一些新型器件. 给出了两个设计实例: 双频TM₀₁–TE₁₁模式变换器和光壁馈源喇叭. 双频TM₀₁–TE₁₁模式变换器的两个工作频点为8.75 GHz和10.3 GHz, 波导半径为16 mm, 在两个频点转换效率为99%以上. 光壁馈源喇叭实现TE₁₁模式向高斯束的转换. CST仿真结果验证了这两个器件设计的正确性和有效性. 关键词： 耦合波理论 模式转换器 模式过渡器 迭代法     

一类球面带形平移网络算子的逼近

借助于球调和多项式的de la Vallée Poussin和构造出了单位球面S^q上一类带形平移网络算子，并给出了其对L^p(S^q)中函数一致逼近的收敛速度.      

The spherical oil agglomeration of barite suspensions in the presence of surfactant and cosurfactant

The spherical agglomeration of barite particles using oil in the presence of both surfactant and cosurfactant was studied. It was found that the mineral suspension needed a critical surfactant concentration to initiate oil agglomeration. The addition of long-chain aliphatic alcohols to the organic phase decreased the critical surfactant concentration. This phenomenon was ascribed to a screening effect of alcohol molecules in the adsorption layer of surfactant. When sodium chloride was added to the solution the spherical agglomeration disappeared even though the surfactant adsorption at the barite/solution interface increased. It was concluded that the disappearance of oil agglomeration was caused by a bilayer of the surfactant which was formed on the barite surface. In the barite—surfactant—alcohol—oil—brine system the agglomeration process is only realized with the long-chain alcohols. This behaviour can be explained by microemulsion formation at the mineral/solution interface.     

800Hz Terfenol-D鱼唇式弯张换能器

本文研制了800Hz Terfenol-D鱼唇式弯张换能器，换能器设计中采用永磁偏磁场和能有效抑制涡流损耗的闭合磁路结构，最高声源级185dB，-3dB带宽180Hz,这种鱼唇工弯张换能器克服了连续直流提供偏磁场时发热强的缺点，并且仅需要普通的功率放大器，更适于长时间连续工作，使这一新型低频大功率水声换能器趋于实用化。     

Optimal lower bounds for cubature error on the sphere

We show that the worst-case cubature error E(Q_m;H^s) of an m-point cubature rule Q_m for functions in the unit ball of the Sobolev space H^s=H^s(S²),s>1, has the lower bound , where the constant c_s is independent of Q_m and m. This lower bound result is optimal, since we have established in previous work that there exist sequences of cubature rules for which with a constant independent of n. The method of proof is constructive: given the cubature rule Q_m, we construct explicitly a ‘bad’ function f_mH^s, which is a function for which Q_mf_m=0 and . The construction uses results about packings of spherical caps on the sphere.     

同时发射和接收纵波和横波的压电复合材料换能器

通过控制压电复合材料中压电相的分布形式，本文具有在百度模振动的１－３型压电复合材料和具有扭转模振动的拼接２－２型压电复合材料组合在一起，构成一种混俣模式压电材料，并测试了这种压电材料晶片的性能参数，使用这种晶片作的换能器可以根据使用者的要求，单独产生纵波或横波，也可同时产生这两种波。