Effects of Sb doping on the structure and properties of SnO2 films

Transparent heat-insulating SnO₂ films were prepared on the glass substrate with sol-gel. The effects of Sb doping on the structure and photoelectric properties of the films were investigated. The films were characterized by scanning electron microscope (SEM), X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), Ultraviolet–Visible-Near Infrared Spectrometer (UV-VIS-NIR) and Hall Effect tester. The results show that the doping of Sb did not change the basic crystal structure of the SnO₂ film, but reduced the crystallinity of the film. With the increase of Sb doping, the grain size decreases first and then maintains basically invariable. The sheet resistance of the film decreases first and then increases. The transmittance of the substrate glass coated with this film (hereinafter referred to as the film's transmittance) in the near-infrared region (780–2500 nm) decreases from 92.55% to 60.48%, and increases a little when the doping amount exceeded 11 mol%. And its transmittance of visible light (380–780 nm) fluctuated slightly between about 81% and 86%.     

A survey of surface tension,molar volume and density for Sn–Ag–Cu–Bi–Sb quinary alloys as lead-free solders

ABSTRACT

By applying the geometric models and the theoretical equation, the surface tension, the molar volume and the density were studied. The empirical calculations were carried out in temperature range 623?K?≤?T?≤?1123?K. Only few thermophysical properties were estimated for eight quinary alloys: Sn3.55Ag0.5Cu3Bi3Sb, Sn3.48Ag0.5Cu3Bi5Sb, Sn3.48 Ag0.5Cu5Bi3Sb, Sn3.40 Ag0.5Cu5Bi5Sb, Sn3.53Ag1Cu3Bi3Sb, Sn3.46Ag1Cu3Bi5Sb, Sn3.46Ag1Cu5Bi3Sb, Sn3.38Ag1Cu5Bi5Sb. The results show that surface tension and density have a linear appearance for all temperatures. We have also studied the influence of the composition and temperature in the studied alloys. The obtained theoretical results are compared with the experimental ones and with the conventional Pb–Sn welds.     

Relativistic optics in gravitational lensing: The focus of a cluster and its aberrations

In this article, general idea of focusing is studied within the framework of optics extension into general relativity (covariant optics). In a configuration of static spacetime, the general, mathematically rigorous treatment of rays, wavefronts and caustics of spherical symmetry is presented, particularly with regard to problems of obtaining them within general relativity. An original result is the aberration formulation to covariant optics, whose application is given in this paper; a particular solution of Einstein equations is finally chosen to provide concrete, exact results of cluster focal length and its aberration structure. In this way, a gravitational lensing situation is shown to be a true lens.     

Near-barrier fusion reactions induced by α on197Au,193Ir,191Ir,185Re,181Ta,121Sb and69Ga nuclei

Fusion-evaporation cross-sections for the α-induced reactions upon¹⁹⁷Au,¹⁹³Ir,¹⁹¹Ir,¹⁸⁵Re,¹⁸¹Ta,¹²¹Sb and⁶⁹Ga nuclei at bombarding energies near the Coulomb barrier have been measured by off-line observation of the γ-rays emitted in the radioactive decay of the residual nuclei using stacked foil technique. The total fusion cross-section for the systems have been compared with simple statistical model calculations using the code ALICE/91 as well as with the coupled channel calculations that include the β₂ and ν₄ slatic deformations and dynamic couplings of the vibrational/rotational states of the target and the projet tile using the code CCDEF.     

一种新的超分辨记录点的读出技术

提出一种新的超分辨记录点的读出技术—超分辨反射膜技术，详细分析了其原理。用该技术，以Sb为超分辨反射膜，SiN为介电层，在激光波长为632．8nm和光学头的数值也径为0．40的读出光学系统中实现了直径为380nm的超分辨记录点的读出。同时研究了Sb薄膜厚度对读出信噪比的影响规律，发现最佳的Sb薄膜厚度为28～30nm，所得的信噪比为38～40dB。     

等温平台石墨炉原子吸收光谱法测定高纯镍中痕量杂质锑

利用石墨炉原子吸收法，在等温平台条件下直接测定高纯镍中的痕量杂质锑，对石墨炉加热程序中的干燥时间、灰化温度及原子化温度进行了优化，同时考察了介质酸度的影响。试验表明，基体镍对锑的测定有显著的影响，为此进行了标准系列基体匹配。该法的特征质量为6．6pg；相对标准偏差为6．5％；加标回收率为100％-103％。     

Characteristics of Ti0.97Co0.03O2:Sb0.01 dilute magnetic semiconducting thin films deposited at 500 °C by pulsed laser deposition

Epitaxial Ti_0.97Co_0.03O₂:Sb_0.01(TCO:Sb) films were deposited on R-Al₂O₃ (1 1 0 2) substrates at 500 °C in various deposition pressures by pulsed laser deposition. The solubility of cobalt within the films increases with decreasing deposition pressure at a deposition temperature of 500 °C. The TCO:Sb films deposited at 5×10⁻⁶ Torr exhibit a p-type anomalous Hall effect having a hole concentration of 6.1×10²²/cm³ at 300 K. On the other hand, films deposited at 4×10⁻⁴ Torr exhibits an n-type anomalous Hall effect having an electron concentration of about 1.1×10²¹/cm³. p- or n-type DMS characteristics depends on the change of the structure of TCO:Sb films and the solubility of Co is possible by controlling the deposition pressure.     

氢化物－气相色谱的元素光度检测器

研究开发的一种新型的元素光度检测器主要用于锗、砷、锡和锑的氢化物气相色谱检测，具有高灵敏，高选择性。它是在普通火焰光度检测器的基础上加装了特制的滤光片改制而成的。对锗、砷、锡和锑的检测限分别为３．０×１０￣（－１１）ｇ、７．０×１０￣（－１１）ｇ、７．０×１０￣（－１０）ｇ和１．１×１０￣（－８）ｇ，相对标准偏差分别为１．８％、２．４％、２．６％和３．０％。     

Zur Struktur zweier Arsen- und Antimontricarboxylate

Zusammenfassung Arsen-tris(2,2-dimethylpropionat) (1) kristallisiert monoklin in der Raumgruppe P2₁/n mita=926.2,b=2158.6,c=983.7 pm, =94.92° undZ=4. As hat gegenüber O die Koordinationszahl 3+3. Antimontripropionat (2) kristallisiert monoklin in der Raumgruppe P2₁/c mita=930.2,b=863.0,c=1575.2 pm, =90.27 undZ=4. Die Moleküle sind intermolekular zu Ketten verknüpft, wodurch Sb die Koordinationszahl 3+3 (+3) erreicht.

---

Structure of arsen(III) and antimony(III) carboxylates

Summary Arsen-tris(2,2-dimethylpropionate) (1) crystallizes monoclinic in the space group P2₁/n witha=926.2,b=2158.6,c=983.7 pm, =94.92°, andZ=4. As has a coordination number of 3+3. Antimony tripropionate (2) crystallizes monoclinic in the space group P2₁/c witha=930.2,b=863.0,c=1575.2 pm, =90.27, andZ=4. The molecules are bridged to chains; therefore, Sb reaches the coordination number 3+3 (+3).

     

Alkaline Earth Transition Metal Antimonides AT4Sb12 (A = Ca,Sr, Ba; T = Fe,Ru, Os) with LaFe4P12-Structure

The title compounds were prepared by reaction of CaSb₂, SrSb₂, or BaSb₃ with the transition metals and antimony in sealed silica tubes. They crystallize with the cubic LaFe₄P₁₂-structure, which was refined from single-crystal X-ray data of CaFe₄Sb₁₂, SrRu₄Sb₁₂, and BaRu₄Sb₁₂ to residuals of R = 0.014, 0.016, and 0.014, respectively. The thermal parameters of the alkaline earth ions increase with decreasing ionic size. The Sb? Sb distances are greater in the iron compound than they are in the two ruthenium compounds. This is rationalized to be due to a larger portion of electrons in antibonding Sb? Sb states in the iron compound.