惰气熔融-热导法测定钕铁硼永磁材料中的氢

建立惰气熔融-热导法测定钕铁硼永磁材料中氢的分析方法。当氧-氢比例大于50:1时,CO对氢的测定结果产生一定的干扰,加入舒茨试剂可消除此干扰。采用标准坩埚,称样0.05g,熔融功率为2.85 kW,选择高纯镍篮和锡片做助熔剂,钕铁硼中氢释放完全。以普通钢铁参考物质建立氢校准曲线,线性相关系数r～2=0.9999,检出限为0.75μg/g。该法用于钕铁硼样品中氢的测定,测定结果与脉冲熔融飞行时间质谱-气体元素分析仪测定结果基本一致,测定结果的相对标准偏差为1.4%(n=5)。该方法可以准确测定钕铁硼永磁材料中的氢,能满足日常分析的要求。     

EMI shielding and dynamic mechanical analysis of graphene oxide-carbon nanotube-acrylonitrile butadiene styrene hybrid composites

Carbon nanomaterials such as carbon nanotubes (CNTs), graphene and their hybrid have been studied extensively. Despite having excellent properties of CNTs and graphene have not yet been fully realized in the polymer composites. During fabrication agglomeration of CNTs and restacking of graphene is a serious concern that results in the degradation of properties of nanomaterials into the final composites. To improve the dispersion of CNTs and restacking graphene, in the present research work, we focused on the hybridization of graphene oxide and CNTs. Multiwalled carbon nanotubes (MWCNTs), functionalized carbon nanotubes (FCNTs), and graphene oxide-carbon nanotubes (GCNTs) reinforced acrylonitrile butadiene styrene (ABS) composites were prepared separately by vacuum filtration followed by hot compression molding. Further, dynamic mechanical analysis (DMA), and electromagnetic interference (EMI) shielding properties of ABS composites reinforced carbon nanofillers were investigated. The dynamic mechanical properties of polymers strongly depend on the adhesion of fillers and polymer, entanglement density of polymer chains in the presence of carbon fillers. The dynamic mechanical characteristics such as storage, loss modulus, and damping factor of prepared composites were significantly affected by the incorporation of MWCNTs, FCNTs, and GCNTs. Maximum EMI shielding effectiveness of −49.6 dB was achieved for GCNT-ABS composites which were highest compared to MWCNTs-ABS composites (−38.6 dB) and FCNTs-ABS composites (−36.7 dB) in the Ku band (12.4–18 GHz). These results depict the great potential of GCNTs-ABS composites to be used in various applications of efficient heat dissipative EMI shielding materials for electronic devices.     

Influence of aspect ratio and arrangement direction on the shear behavior of ellipsoids

This work studies the macroscopic and microscopic behaviors of ellipsoids under triaxial tests using 3D discrete element method (DEM) simulation. To avoid the boundary effect, a novel stress servo-controlled periodic boundary condition is proposed to maintain the confining pressure of samples during testing. The shape features of ellipsoids are investigated, including the aspect ratio of elongated/oblate ellipsoids and the initial arrangement directions of ellipsoids. The macroscopic properties of ellipsoidal particle samples, such as the deviatoric stress, volumetric strain, internal friction angle, as well as dilatancy angles are explored. Elongated and oblate ellipsoids with varying aspect ratios are investigated for the occurrence of stick-slips. In addition, it is demonstrated that the initial arrangement direction has a significant impact on the coordination number and contact force chains. The corresponding anisotropy coefficients of the entire contact network are analyzed to probe the microscopic roots of macroscopic behavior.     

Interference of Data Transmission in Access and Backbone Networks by High-Power Sensor System

Currently, individual optical fibers are mostly used for each non-data application, which is very inefficient and uneconomical. Sharing a single fiber for multiple applications is a promising solution. However, in the case of a non-data application, the situation is much more complicated compared to data because of special application´s requirements. In laboratory setup, we performed a measurement with a standard G.652D optical fiber for analyzing possible interaction of stable frequency/accurate time transmission, 1.25/10Gbps data transmission (typical bitrates for access point-to-point networks), and high-power sensor signal for different channel spacing and different pulse duration of sensor signal.     

An asymptotic Reissner–Mindlin plate model

A mathematical study via variational convergence of a periodic distribution of classical linearly elastic thin plates softly abutted together shows that it is not necessary to use a different continuum model nor to make constitutive symmetry hypothesis as starting points to deduce the Reissner–Mindlin plate model.     

辉光放电质谱分析中质谱干扰及其校正方法的现状

详细地介绍了辉光放电质谱分析中的质谱干扰如同量异位素、多原子离子和多电荷离子干扰。从同位素选择、高分辨率仪器、碰撞诱导解离、离子源冷却、数学方法校正、放电气体更换和放电气体纯度提高等方面对辉光放电质谱的质谱干扰校正方法的现状进行了评述(引用文献共68篇)。     

Near-field-smoothing of periodic chirped pulse with applied angular dispersion

Periodic chirped pulse (PCP) with applied angular dispersion has been approved to be an efficient beam smoothing method in inertial confinement fusion. In this paper, the propagation characteristics of dispersed PCP in near field is analyzed theoretically and calculated numerically, and the results indict dispersed PCP is a motion beam, which can be applied to improve beam uniformity in near field. An experiment is carried out to validate the near-field-intensity smoothing effect of PCP.     

Spectral feature with sub-natural linewidth due to quantum interference in a four-level system

This paper studies the narrow spectral feature appearing in a four-level system coupled by two strong coherent fields and probed by a weak laser field. The linewidth is examined as a function of the Rabi frequencies of coupling fields, and the result is explained by using the dressed-state formalism.     

Quantum analysis on the four-photon interference

We present a theory for quantum interference of four photons generated by spontaneous parametric downconversion. Detailed investigation of the dependence of fourfold coincidence count rate on time delay between the incident and the reflective pump laser pulses is carried out. Gaussian type dependence is found, and good agreement between our theoretical results and experimental data reported in the literature is achieved.     

Laser frequency stabilization based on Sagnac interferometric spectroscopy

A simple method based on Sagnac interferometric spectroscopy (SIS) is applied for frequency stabilization of diode lasers. Sagnac interferometric spectra of rubidium vapor are investigated both theoretically and experimentally. The interference signal at the output of the Sagnac interferometer displays a sharp dispersion feature near the atomic resonance. This dispersion curve is used as the feedback error signal to stabilize the laser frequency. Linewidth of a diode laser is stabilized down to 1 MHz by this modulation-free method.