Biosensors based on gold nanoelectrode ensembles and screen printed electrodes

Gold nanowires were synthesized within polycarbonate membranes according to an electroless deposition method, obtaining nanoelectrode ensembles (NEEs) with special electrochemical features. NEEs were coupled with home-produced carbon graphite screen printed electrodes and the electrochemical properties of the original nanoelectrode ensemble on screen printed substrate (NEE/SPS) assembly has been tested for sensors application. Glucose oxidase has been used as model enzyme in order to verify the feasibility of disposable gold NEE/SPS biosensors. Finally, different immobilisation and electrochemical deposition techniques based on either self assembled monolayers of cysteamine (CYS) or amino-propyl-triethoxysilane (APTES) and conductive polyaniline (PANI) molecular wires were used. Spatial patterning of the enzyme on the polycarbonate surface and of PANI wires on gold nanoelectrodes was obtained. Possible direct electron transfer between the enzyme and the PANI modified gold nanoelectrodes has been evaluated.     

Catalyzation of 1,4-additions of arylboronic acids to α,β-unsaturated substrates using nickel(I) complexes

Nickel(I) complexes were generated in situ from Ni (PPh₃)₂Cl₂ using activated iron and the complexes combined with N,N′-bis(4-fluorobenzylidene) ethane-1,2-diamine (BFBED) were then used as a catalyst for the 1,4-addition reaction of arylboronic acids to α,β-unsaturated substrates. The reaction proceeded to completion and did not require the addition of a base but the addition of potassium iodide is crucial to this cross-coupling reaction. Moreover, experimental observations suggested a possible Ni(I)–Ni(III) catalytic cycle mechanism.     

On the induced‐fit mechanism of substrate‐enzyme binding structures of nylon‐oligomer hydrolase

We present a detailed computational investigation of the induced‐fit motion in a nylon‐oligomer hydrolase (NylB) upon substrate binding. To this aim, we resort on the recently introduced parallel cascade selection molecular dynamics approach, allowing for an accelerated access to the set of conformational changes from an open‐ to a closed‐state structure to form the enzyme‐substrate complex in a specific induce‐fit mechanism. The structural investigation is quantitatively complemented by free energy analyses within the umbrella sampling algorithm accompanied by weighted histogram analysis. We find that the stabilization free energy is about 1.4 kcal/mol, whereas the highest free energy barrier to be overcome is about 2.3 kcal/mol. Conversely, the energetic contribution for the substrate binding is about 20 kcal/mol, as estimated from Generalized Born/Surface Area. This means that the open‐close induced‐fit motion could occur frequently once the substrate binds to the open state of NylB. © 2014 Wiley Periodicals, Inc.     

Effects of substrate and transfer on CVD-grown graphene over sapphire-induced Cu films

We differentiated the effects of Cu films deposited on single crystalline a-,r-,and c-plane sapphire substrates upon graphene films synthesized with atmospheric pressure chemical vapor deposition(CVD).The data illustrate that the realization of high-crystalline Cu film is dependent not only on the crystallinity of underlying substrate,but also on the symmetric match of crystallographic geometry between metal film and substrate.We also systematically investigated the effects of PMMA removal on the Raman ID/IG and IG/I2D values of transferred graphene.The results reveal that different PMMA removal methods do not alter the ID/IG values;instead,the residue of PMMA increases the IG/I2D values and the thermal decomposition of PMMA leads to higher IG/I2D values than the removal of PMMA with acetone.The effects of PMMA removal on variations of the Raman spectra are also discussed.     

Nanoscale imaging of oxidized copper foil covered with chemical vapor deposition-grown graphene layers

Characterization of the geometrical and structural characteristics of oxidized Cu area in high resolution is crucial for tracking the change in morphology, exploring interactions between graphene layers and Cu substrates and revealing the mechanism for the orientation-dependent oxidation of Cu. Here, we reported experimental results on nanoscale imaging of natural oxidation of the polycrystalline Cu substrate coated by partial-coverage chemical vapor deposition (CVD)-grown graphene stored in dryer under ambient conditions for up to 10 months. Scanning electron microscope (SEM), together with atomic force microscope (AFM), Raman, and X-ray photoelectron spectroscopy (XPS), was used for systematically studying the morphological and compositional changes at nanoscale during oxidation. The appearance of oxidized Cu substrates could be unambiguously distinguished from the unoxidized regions based on their distinctly different morphologies in SEM images, and the underlying mechanism was discussed in detail. By analyzing a millimeter-seized polycrystalline Cu substrate, we found that the oxidation of polycrystalline Cu substrate depends sensitively on both orientation of graphene layers and Cu substrates. Furthermore, the time-dependent oxidation evolution of Cu substrate was also established, and the oxidation rate was readily determined. The findings reported here will have important implications for developing protection coatings for Cu.     

纳米Ag/TiO_(2)纳米管阵列基底构建及表面增强拉曼散射光谱检测与降解盐酸四环素北大核心CSCD

将阳极氧化与光还原法结合,在TiO_(2)纳米管阵列(TiO_(2)NTAs)表面修饰Ag纳米粒子,获得一种均匀有序、稳定性高且可循环的TiO_(2)NTAs/Ag活性基底。采用X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)、表面增强拉曼散射光谱(SERS)和扫描电子显微镜(SEM)等手段对TiO_(2)NTAs/Ag的组成和结构进行了表征。进一步研究了该TiO_(2)-NTAs/Ag阵列对盐酸四环素(TC-HCl)的SERS响应,结果表明,该复合基底对TC-HCl具有较高的检测灵敏度,在水中检测限可达1×10^(−14) mol/L,而TiO_(2)-NTAs与Ag之间的协同效应对其检测性能的提高起着关键作用。此外,TiO_(2)NTAs/Ag基底在光照下对TC-HCl展示了优异的降解活性,且至少可循环使用8次。表明该TiO_(2)NTAs/Ag基底在环境中有机污染物的SERS检测和降解领域具有潜在的应用前景。     

Recent progress in experiments for sessile droplet wetting on structured surfaces

Wetting of a sessile droplet on structured or patterned surface can be found in a broad range of applications. The researchers have been promoted to keep working on the topic. The review is on the basis of the recent experimental advances on the sessile droplet wetting on the hydrophobic, hydrophilic, or combined hydrophobic and hydrophilic surfaces under isothermal conditions, and on heating or cooling substrates having nonisothermal conditions. More attention has been paid on the wetting configuration between the sessile droplet and the structured substrate; the research gap has been discussed on identifying the three-phase line shape. Further, the three-dimensional measurement for the sessile droplets on the patterned surfaces with focusing more on the contact line of sessile droplets might reveal new physical insights. This review targets at building a holistic overview on the sessile droplet wetting behaviors on the structured substrate in the past 2 years.