Performance of Pt/SnO2 catalyst in the gas phase hydrogenation of crotonaldehyde

Selective hydrogenation of crotonaldehyde was performed on 5% Pt/SnO₂ catalysts, in gaseous phase, at atmospheric pressure, at 353 K. Two types of catalyst were prepared using H₂PtCl₆ and Pt(NH₃)₄(NO₃)₂ as metallic precursors. Their performances were compared as a function of the reduction temperature and both catalysts were characterised by X-ray diffraction after different reduction treatments. Using the ex-chloride catalyst, the selectivity values to the unsaturated alcohol (UOL) resulted into a maximum of 45% while a selectivity as high as 70–77%, in 0–25% conversion range, was achieved by using ex-nitrate catalyst reduced at 443 K. The formation of Pt–Sn alloy on the metal particles of platinum was thought to be necessary to improve the activity and the selectivity on these catalysts. In the contrast, a presence of PtSn₂ formed at a reduction temperature higher than 473 K led to a decrease of activity and selectivity.     

Preparation and characterization of Mg(II)-, Ca(II) and Cd(II) complexes of 1,2-ethanediol and water

Mixed ligand complexes of different compositions were prepared with water, sulfate ion and 1,2-ethanediol as ligand. IR spectra and the thermoanalytical curves of the complexes were recorded. Oxygen atoms bound by one or two coordinate bonds to the metal ion, or by hydrogen-bonds in the crystal, were observed. As for the water molecule, 1,2-ethanediol molecules of crystal and monohydrate type were found, depending on the type of binding of the oxygen atoms.This revised version was published online in November 2005 with corrections to the Cover Date.     

锌对非晶态Co-B合金的改性及催化肉桂醛加氢为肉桂醇的研究

采用KBH4还原法制备了非晶态Co-B和Co-Zn-B催化剂,以肉桂醛选择加氢制肉桂醇为探针反应,研究了Zn对Co-B非晶态催化剂的修饰改性作用,并采用XRD、DSC、XPS、和H2-TPD对催化剂进行了表征.研究表明,少量的Zn没有改变Co-B催化剂的非晶结构,但提高了催化剂主体的热稳定性,其中1%的Zn可使Co-B非晶态催化剂主体结晶放热峰提高12K,并在665K出现新的H2脱附峰,说明催化剂因掺入锌形成了新的氢吸附中心,锌在催化剂中以金属态和氧化态两种形式存在.催化剂的整体均衡而局部电子分布不均衡的缺陷势结构增强了对肉桂醛分子C=O双键O原子的侧链偶合吸附与金属氧化物的金属离子对羰基的极化作用协同活化了肉桂醛的C=O双键,提高了催化剂对C=O双键的加氢选择性.加氢反应工艺条件及催化剂寿命研究表明,适宜的反应温度为413K,氢压为2.5MPa,反应时间为3.0h,肉桂醇的最高产率可达84.0%,并具有较好的催化稳定性.     

Preparation of nanometer FeCuP alloy and its application in decomposition of PH3

A new ternary Fe-based alloy catalyst FeCuP applied to decompose PH_3 was prepared with low-cost material by chemical reduction deposition method.The properties of it were characterized by XRD,ICP and SEM.Its catalytic activity on the decomposition of PH_3 and the decomposition conditions were studied.FeCuP alloy exhibits high thermal stabilities and high catalytic activity.Using it as catalyst,the decomposition temperature of phosphine decreases from over 800℃to 400-500℃.The decomposition rate of phosphine achieved 100%.     

催化增强化学蒸气沉积法在聚酰亚胺上沉积钯-铂合金薄层

以N₂，O₂作载气，通过催化增强化学蒸气沉积(CECVD)分别制得在聚酰亚胺上的金属铂、钯及其合金薄层。铂、钯配合物的共同沉积可生成Pt-Pd合金薄膜。在Pd-Pt合金的沉积过程中，Pd/Pt的原子数比率随共同沉积的条件改变而变化。O₂为载气、300 ℃条件下,用Pd(η³-allyl)(hfac)和Pt(COD)Me₂作前驱体共沉积制备Pd-Pt合金，得到含Pd 37.2%，Pt 62.8%且不     

水热处理氢氧化镁微晶性质研究

Shape apprearance and crystallite characterization of magnesium hydroxide at different hydrothermal tempera-tures have been investigated by SEM， XRD and DSC methods. The grain size， cell parameter and lattice distortion rate of powders under each condition were obtained. The results show that the grains had grown up， especially along the (001) surface as the hydrothermal temperature was raised， accompanying the shrinkage of lattice and the de-scending of distortion rate. These could be relate to the re-crystallization of Mg(OH)₂， as well as the thermal dif-fusion of OH^- with lower charges， resulting in good dispersion， high thermal decomposition temperature and en-thalpy of Mg(OH)₂. Moreover， it is helpful for the increase of the retardant behavior of Mg(OH)₂.     

Mg／Mgl．8La0．2Ni纳米复合材料的吸放氢性能研究

应用高能球磨法制备Mg-x％Mg1.8La0.2Ni（x=10、20和30）纳米复合储氢材料．X射线衍射（XRD）、透射电镜（TEM）和选区电子衍射（SAED）测试表明，该复合材料具有纳米晶和非晶态混合结构的性质，吸氢温度降低，较好的吸放氢动力学性能，在423K，2．5MPa氢压的条件下，50s内即可达到最大吸氢量．     

健康老年人血清锌,铜,镁含量的调查

应用原子吸收分光光度法对济南市健康老年人血清中铜、锌、镁含量进行了测定。结果表明，健康老年人血液铜、锌水平低，但铜、锌比值正常，而镁的含量则较高。提示这组健康老年人未患心、脑血管疾病及糖尿病的原因可能与铜、锌、镁等微量元素有关。     

Electrodeposition of a cobalt-molybdenum alloy from an ammonia-citrate electrolyte

Kinetics of processes of electrochemical production of a cobalt-molybdenum alloy out of an ammonia-citrate electrolyte is studied. The electrolyte’s composition is similar to that used for depositing a nickel-molybdenum alloy. It is established that the cobalt-molybdenum alloy undergoes deposition at smaller values of pH (5.0–6.0) than the nickel-molybdenum alloy (7.0–9.0). The current efficiency for the cobalt-molybdenum alloy is substantially dependent on the electrolyte pH, whereas the chemical composition of the obtained deposits is practically independent of the electrolyte pH in the pH interval 5.0–8.0 at current densities of 0.025 to 0.100 A cm^?2. On the other hand, a change in the electrolyte pH produces a considerable effect on the morphology of the obtained deposits. At large values of pH (pH 8.0), one can obtain a powder-like deposit of the cobalt-molybdenum alloy with a small value of the current efficiency. The deposits that are obtained in the pH region 5.0–6.0 have some cracks, with the number of cracks increasing with the electrolyte pH.     

高砷低金银的铅阳极泥中银的冶炼

本文报导了将纯碱加入砷含量高的铅阳极泥熔炼成贵铅，用硝酸溶解，硫氰酸盐沉淀，再用锌粉还原得银的方法。从而避免砒霜挥发。