Homohelicity induction of propylene-linked zinc bilinone dimers by complexation with chiral amine and α-amino esters. Preorganization of structurally coupled homohelical subunits

Homohelicity induction of a series of propylene-linked zinc bilinone (ZnBL; linear tetrapyrrople-zinc(II) complex) dimers upon complexation with chiral amine and α-amino esters was investigated. Introduction of substituents such as dimethyl and diisobutyl to the central carbon of the propylene spacer gave rise to stabilization of the homohelical (PP and MM) conformers rather than the heterohelical (PM) conformer. As bulkiness of the substituent increased, stability of the homohelical conformers was raised. The preorganization of the homohelical structures led to significantly amplified homohelicity induction upon complexation with chiral amine and α-amino esters.     

多普勒效应测试仪的改进

为了解决电磁波多普勒效应在实验室演示的困难，采用单片机和一系列大规模集成电路设计了一种演示电磁波多普勒效应的测试仪器，分析了电磁波的多普勒效应原理，给出了该仪器的组成结构，介绍了该仪器铁特点。     

Interference of probabilities and number field structure of quantum models

We study the probabilistic consequences of the choice of the basic number field in the quantum formalism. We demonstrate that by choosing a number field for a linear space representation of quantum model it is possible to describe various interference phenomena. We analyse interference of probabilistic alternatives induced by real, complex, hyperbolic (Clifford) and p‐adic representations.     

用于波分复用系统的多峰干涉滤光片

介绍了用于波分复用系统的多峰干涉滤光片的设计原理,提出了滤光片透射峰位置的确定方法,讨论了影响滤光片半宽度和截止度的因素,给出了滤光片的膜厚容差分析结果,表明透射率监控标准偏差在<0.5%范围内,可以得到波形良好的多峰滤光片,最后给出了实验结果.     

CdSe和ZnO量子点的拉曼光谱研究

本文介绍了用拉曼光谱研究CdSe和ZnO两种Ⅱ Ⅳ族量子点材料的结果,对拉曼峰进行了指认。观察到的光学声子峰位的移动被认为是由量子限制效应引起。     

激光等离子体探针及应用研究

本文介绍用阴影、纹影相干涉方法确定等离子体折射系数变化的原理。分析了等离子体中的非线性效应和对光探测系统的基本要求。并简要叙述了实验上采用的后向喇曼探测束,给出了等离子体干涉、纹影和阴影的测量结果。     

Stress-Strain State in the Zone of Load Transfer in a Composite Specimen under Uniaxial Tension

The stress-strain state in the zone of load transfer in a uniaxially stretched specimen made of a unidirectional epoxy carbon-fiber-reinforced plastic (CFRP) is investigated. A parametric analysis of the influence of geometric and mechanical characteristics of the specimen on its stress-strain state is performed by means of finite-element modeling. The parameters allowing us to significantly reduce the dangerous concentration of transverse and tangential stresses are revealed. The mechanical tensile characteristics of a high-strength pultruded unidirectional CFRP are determined experimentally, and the size effect of its strength is estimated.     

Experimental investigation of time-dependent cavitation in an oscillatory squeeze film

The occurrence of time-dependent cavitation and tensile stress in an oscillatory oil squeeze film were investigated experimentally. The test apparatus was a simple thrust bearing consisting of two parallel circular plates separated by a thin viscous oil film. During the test, one plate was at rest while the other (transparent) oscillated in a direction normal to its surface. This test configuration was chosen to avoid the rotational motion and complicated geometry of a squeeze film journal bearing. The frequency of oscillation was in the range of 5 to 50 Hz and was controlled by an electro-magnetic exciter. The process of cavity formation and its subsequent development was recorded by a high-speed video camera. Concomitant pressure in the oil film was measured both within and without the cavitation region. It was found that both tensile stress and cavities existed in a squeeze film under certain working conditions.     

浮栅ROM器件辐射效应机理分析

分析了浮栅ROM器件的辐射效应机理，合理地解释了实验中观察到的现象.指出辐射产生的电子空穴对在器件中形成的氧化物陷阱电荷和界面陷阱电荷是导致存储单元及其外围电路出现错误的原因.浮栅ROM器件的中子、质子和⁶⁰Co γ辐射效应都是总剂量效应 . 关键词： FLASH ROM EEPROM 中子 质子 60Co γ')" href="#">⁶⁰Co γ 总剂量效应     

Influence of transition metal ions on the textural properties of alumina and aluminasilicates

Accelerated phase transformations and chemical reactions of metastable aluminas and kaolinite, doped with Cu^{2 +}, Mn^{3 +}/Mn^{2 +} and Fe^{3 +}/Fe^{2 +} ions, are accompanied with accelerated decrease of surface area and pore volume values. The phenomena in metal ion doped samples are explained by a catalytic mechanism, in terms of the Jahn-Teller effect. This revised version was published online in June 2006 with corrections to the Cover Date.