一种可调制的连续光谱点光源

短弧氙灯是一种发光强度高,具有从紫外到红外的连续光谱的点光源。本文介绍交流供电的短弧氙灯光源,用两电极短弧氙灯实现三电极短弧氙灯性能的方法。给出了用一个系统满足各种不同发光强度、不同调制波形、不同调制频率的要求,以及在制造和使用过程中应注意的事项。     

STABILITY OF A KIND OF COMPOUND BOUNDARY VALUE PROBLEM WITH RESPECT TO THE PERTURBATION OF BOUNDARY CURVE

In this paper, we discuss the stability of general compound boundary value prob-lems combining Riemann boundary value problem for an open arc and Hilbert bound-ary value problem for a unit circle with respect to the perturbation of boundary curve.     

A variable neighborhood search for the capacitated arc routing problem with intermediate facilities

The capacitated arc routing problem (CARP) focuses on servicing edges of an undirected network graph. A wide spectrum of applications like mail delivery, waste collection or street maintenance outlines the relevance of this problem. A realistic variant of the CARP arises from the need of intermediate facilities (IFs) to load up or unload the service vehicle and from tour length restrictions. The proposed Variable Neighborhood Search (VNS) is a simple and robust solution technique which tackles the basic problem as well as its extensions. The VNS shows excellent results on four different benchmark sets. Particularly, for all 120 instances the best known solution could be found and in 71 cases a new best solution was achieved.     

ARC INTERFACE CRACK IN A THREEPHASE PIEZOELECTRIC COMPOSITE CONSTITUTIVE MODEL

An in-depth investigation is made on the problem of an arc-shaped interface insulating crack in a three-phase concentric circular cylindrical piezoelectric composite constitutive model. An exact solution in series form is derived by employing the complex variable method. In addition, the distribution of physical quantities such as stresses, strains, electric displacements and electric fields in the whole field and along the interface is also presented. Explicit expressions for crack opening displacement, jump in electric potential on the crack surface and the electro-elastic field intensity factors at the crack tips are obtained. Specific calculations demonstrate that the convergence of the series form solution is satisfactory and that the outer phase (composite phase) will exert a significant effect on the electro-mechanical coupling response of the composite system. Owing to the fact that stresses and electric displacements still possess conventional inverse square root singularities, the oscillating singularities near the crack tip under plane strain conditions will be absent and, as a result, no unphysical interpenetration phenomenon of the two crack surfaces will occur. In conclusion, the elastic solution obtained is also based on a solid physical foundation. Project supported by the National Natural Science Foundation of China (No.59635140), and the Doctorate Foundation of Xi'an Jiaotong University.     

Acoustic resonance and atomization for gas-liquid systems in microreactors

It is shown that a liquid slug in gas–liquid segmented flow in microchannels can act as an acoustic resonator to disperse large amounts of small liquid droplets, commonly referred to as atomization, into the gas phase. We investigate the principles of acoustic resonance within a liquid slug through experimental analysis and numerical simulation. A mechanism of atomization in the confined channels and a hypothesis based on high-speed image analysis that links acoustic resonance within a liquid slug with the observed atomization is proposed. The observed phenomenon provides a novel source of confined micro sprays and could be an avenue, amongst others, to overcome mass transfer limitations for gas–liquid processes in flow.     

纵磁作用下真空电弧单阴极斑点等离子体射流三维混合模拟

真空电弧的特性直接受到从阴极斑点喷射出的等离子体射流的影响,对等离子体射流进行数值仿真有助于我们深入了解真空电弧的内部物理机制.然而,磁流体动力学和粒子云网格仿真方法受限于计算精度和计算效率的原因,无法有效地应用于真空电弧等离子体射流仿真模拟.本文开发了一套三维等离子体混合模拟算法,并在此基础上建立了真空电弧单阴极斑点射流仿真模型,模型中将离子作宏粒子考虑,而电子作无质量流体处理,仿真计算了自生电磁场与外施纵向磁场作用下等离子体的分布运动状态.仿真结果表明,单个阴极斑点情况下真空等离子体射流在离开阴极斑点后扩散至极板间,其整体几何形状为圆锥形,离子密度从阴极到阳极快速下降.外施纵向磁场会压缩等离子体,使得等离子体射流径向的扩散减少并且轴线上的离子密度升高.随着外施纵向磁场的增大,其对等离子体射流的压缩效应增强,表现为等离子体射流的扩散角度逐渐减小.此外,外施纵向磁场对等离子体射流的影响也受到电弧电流大小的影响,压缩效应随电弧电流的增加而逐渐减弱.     

刃型位错和圆弧形刚性线夹杂的干涉效应

位错和夹杂的干涉效应对于理解材料的强化和韧化机理具有十分重要的意义。文中研究了晶体材料中刃型位错和多条共圆弧刚性线夹杂的干涉作用。利用Riemann—Schwarz反照原理和复势函数的奇性主部分析技术，得到了问题的一般解答；对于只含一条刚性线夹杂的情况，给出了复势函数的封闭形式解。由Peach-Koehler公式求出了作用在刃型位错上的位错力，并讨论了圆弧形刚性线夹杂对位错力的影响规律，发现弧形刚性线对刃型位错有很强的排斥作用。本文解答不但可作为格林函数获得任意分布位错的相应解答，而且可以用于研究刚性线夹杂和任意形状裂纹的干涉效应问题。     

三相交流电弧吹样法光谱分析初探

介绍了三相交流电弧吹样法的理论、装置和性能。证明三相电弧对提高吹样法光谱分析的性能很有帮助。     

Mn-Cu合金成分对去合金化法制备纳米多孔铜的影响

 采用电弧熔炼制备出前驱体Mn-Cu合金,在稀盐酸溶液中自由腐蚀去合金化,制备出具有双连续结构的纳米多孔铜。研究了前驱体合金的成分对纳米多孔铜微观结构及Mn的选择性腐蚀程度的影响。结果表明：前驱体Mn-Cu合金的Cu原子分数为43%时,其去合金化受到抑制,存在明显的未完全去合金化的岛状结构;前驱体Mn-Cu合金的Cu原子分数为32%～23%时,可完全去合金化,形成平均孔径尺寸为20～100 nm,平均系带尺寸为30～80 nm,具有双连续结构的纳米多孔铜;前驱体Mn-Cu合金的Cu原子分数低至20%时,去合金化后存在大量裂纹,形成纳米颗粒聚集体。纳米多孔铜中存在少量的残余Mn,残余Mn的原子分数随着前驱体合金Mn原子分数的增高而降低。实验表明腐蚀液浓度对纳米多孔铜形貌也存在影响。     

磁过滤器电流对非晶碳薄膜摩擦学特性影响的研究

研究了过滤阴极真空电弧技术中,不同的磁过滤器电流下(5—13 A),制备的四面体非晶碳(ta-C)薄膜对摩擦学特性的影响.通过对薄膜厚度,薄膜结构以及薄膜表面粗糙度随磁过滤电流的变化结果进行了测试,结果表明,随着磁过滤器电流的增大,薄膜的sp³键含量逐渐减少,表面粗糙度从0.13增大到0.38.磁过滤器电流在5 A时,薄膜的摩擦系数最小约为0.08,当电流增大到7 A时,摩擦系数显著增大,磁过滤器电流从7 A增大到13 A时,薄膜的摩擦系数再次减小约为0.1. 关键词： 四面体非晶碳 过滤阴极真空电弧 磁过滤器电流 摩擦系数