首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   86篇
  免费   7篇
力学   63篇
数学   20篇
物理学   10篇
  2020年   2篇
  2013年   5篇
  2012年   2篇
  2011年   3篇
  2010年   10篇
  2009年   5篇
  2008年   3篇
  2007年   4篇
  2006年   5篇
  2005年   6篇
  2004年   8篇
  2003年   6篇
  2002年   1篇
  2001年   3篇
  2000年   3篇
  1999年   3篇
  1998年   1篇
  1997年   5篇
  1996年   5篇
  1994年   3篇
  1991年   3篇
  1990年   2篇
  1988年   2篇
  1987年   3篇
排序方式: 共有93条查询结果,搜索用时 15 毫秒
1.
研究了纳米线环形晶体薄膜涂层中失配位错偶极子与纳米线的干涉效应,并考虑纳米尺度应力效应及纳米线晶格失配的影响。运用弹性复势方法,分别获得了涂层和纳米线区域复势函数的精确解析解。利用求得的应力场和Peach-Koehler公式,得到了作用在螺型位错偶极子上像力和失配应力的精确表达式。算例结果表明,涂层纳米线界面应力和失配应力对涂层中失配位错偶极子的作用影响很大,由于界面应力和失配应力的存在,可以改变涂层内位错偶极子与纳米线干涉的引斥规律。与宏观尺度下的线型材料相比,纳米线材料由于界面效应的影响,位错偶极子在涂层中平衡位置的数量增加,涂层中更容易产生失配位错偶极子。考虑纳米线晶格失配的影响后,位错偶极子在涂层中平衡位置的数量增加。由此可知,减小纳米线晶格失配的影响,可以控制失配位错偶极子的产生。  相似文献   
2.
3.
摘 要 研究了无穷远纵向剪切下无限大基体中含共焦刚性核弹性椭圆夹杂内任意位置螺型位错的干涉问题。运用复变函数保角映射、解析延拓等方法,获得了基体与夹杂区域的应力场的级数形式精确解,并得出了位错像力的解析表达式,导出了纵向剪切下两椭圆界面最大应力及其比值公式。分析结果表明:夹杂内部的刚性核对位错与夹杂的干涉产生明显的扰动效应,排斥硬夹杂内位错,并使之不断趋近弹性夹杂界面。对于软夹杂,夹杂中的位错存在稳定的平衡位置,当位错位于刚性核和平衡位置之间时,位错会趋于弹性夹杂界面;当位错位于平衡位置和弹性夹杂界面之间时,位错会离开界面。结果还显示,夹杂的长轴和短轴之比对位错与夹杂的干涉也有着不可忽视的影响,尤其当位错在刚性核附近时,随着夹杂的长、短轴比值的减小,核对位错的排斥力也明显减弱。本文解答包含了多个以往文献成果。  相似文献   
4.
方棋洪  宋豪鹏  刘又文 《中国物理 B》2010,19(1):16102-016102
The interaction between an edge dislocation and a crack emanating from a semi-elliptic hole is dealt with. Utilizing the complex variable method, closed form solutions are derived for complex potentials and stress fields. The stress intensity factor at the tip of the crack and the image force acting on the edge dislocation are also calculated. The influence of the morphology of the blunt crack and the position of the edge dislocation on the shielding effect to the crack and the image force is examined in detail. The results indicate that the shielding or anti-shielding effect to the stress intensity factor increases acutely when the dislocation approaches the tip of the crack. The effect of the morphology of the blunt crack on the stress intensity factor of the crack and the image force is very significant.  相似文献   
5.
Shielding effect and emission criterion of a screw dislocation near an interfacial blunt crack are dealt with in this paper. Utilizing the conformal mapping technique, the closed-form solutions are derived for complex potentials and stress fields due to a screw dislocation located near the interfacial blunt crack. The stress intensity factor on the crack tips and the critical stress intensity factor for dislocation emission are also calculated. The influence of the orientation of the dislocation and the morphology of the blunt crack as well as the material elastic dissimilarity on the shielding effect and the emission criterion is discussed in detail. The results show that positive screw dislocations can reduce the stress intensity factor of the interfacial blunt crack tip (shielding effect). The shielding effect increases with the increase of the shear modulus of the lower half-plane, but it decreases with the increase of the dislocation azimuth angle. The critical loads at infinity for dislocation emission increases with the increase of emission angle and curvature radius of blunt crack tip, and the most probable angle for screw dislocation emission is zero. The present solutions contain previous results as special cases.  相似文献   
6.
通过对保角映射及解析延拓的应用,获得了无穷远处Ⅲ型均布荷载和集中荷载作用下,连接在唇形裂纹面上的内埋应变加强层的级数形式应力解析解.分析了材料匹配、界面连接及几何特征对界面应力的影响,研究发现对于不同的荷载形式,合理的材料匹配、连接及几何特征能够有效地减少应力集中和界面应力.  相似文献   
7.
各向异性材料界面共线刚性线夹杂的反平面问题   总被引:5,自引:1,他引:4  
研究两种各向异性材料焊接界面含共线刚性线夹杂的反平面问题,导出了一般问题的公式和几个典型问题的封闭形式解,求出了刚性线尖端的应力分布,从文中解答的特殊情况,直接导出各向性材料界面与均匀各向异性介质中相应问题的公式与结果,并与有关文献相一致。  相似文献   
8.
This paper attempts to investigate the problem for the interaction between a uniformly moving screw dislocation and interface rigid lines in two dissimilar.anisotropic. materials. Integrating Riemann-Schwarz's symmetry principle with the analysis singularity of complex functions, we present the general elastic solutions of this problem and the closed form solutions for interfaces containing one and two rigid lines. The expressions of stress intensity factors, at the rigid line tips and image force acting on moving dislocation are derived explicitly. The results show that dislocation velocity has an antishielding effect on the rigid line tip and a larger dislocation velocity leads to the equilibrium position of dislocation closing with the rigid line. The presented solutions contain previously known results as the special cases.  相似文献   
9.
研究了多晶体材料中螺型位错偶极子和界面裂纹的弹性干涉作用.利用复变函数方法,得到了该问题复势函数的封闭形式解答.求出了由位错偶极子诱导的应力场和裂纹尖端应力强度应子,分析了偶极子的方向,偶臂和位置以及材料失配对应力强度因子的影响.推导了作用在螺型位错偶极子中心的像力和力偶矩,并讨论了界面裂纹几何条件和不同材料特征组合对位错偶极子平衡位置的影响规律.结果表明,裂纹尖端的螺型位错偶极子对应力强度因子会产生强烈的屏蔽或反屏蔽效应.同时,界面裂纹对螺型位错偶极子在材料中运动有很强的扰动作用.  相似文献   
10.
楔型向错偶极子和裂纹的干涉效应   总被引:2,自引:0,他引:2  
研究了晶体材料中一个楔型向错偶极子与裂纹的弹性干涉效应.运用复变函数方法获得了复势函数和应力场的封闭形式解答,导出了裂纹尖端应力强度因子和作用在向错偶极子中心点像力的解析表达式.获得了向错偶极子的位置、方向和偶臂长度对裂纹尖端应力强度因子的影响规律,并讨论了裂纹附近向错偶极子的平衡位置.结果表明向错偶极子靠近裂纹尖端时,对应力强度因子有明显的屏蔽或反屏蔽作用.  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号