复合材料柔软性对倒金字塔微结构阵列传感器性能的影响

采用模压成型方法制备了2种柔软性不同的热塑性聚氨酯/短切碳纤维/碳纳米管(TPU/SCF-CNT)复合材料复制物, 其表面上具有倒金字塔微结构阵列, 内部有SCF与CNT共同构成的导电通路. 将复合材料复制物和相应的复合材料平整片封装成柔性传感器. 结果表明, 压力作用下传感器内复制物和平整片之间的接触电阻因倒金字塔底棱的形变而显著降低. 对使用柔软性较高的复合材料封装的传感器, 虽然其相对迟滞稍大, 但压力作用下倒金字塔底棱形变量较大, 且复制物和平整片内导电通路增加量较大, 因此其在0~2.5 kPa的线性区内具有较高的灵敏度(0.32 kPa^?1). 制备的2种传感器均具有快速响应特性, 且能在500 s(约1580次)的循环压缩/释放测试(峰值压力约3 kPa)中保持较稳定的电阻响应. 研究表明, 利用模压成型的表面倒金字塔结构复合材料复制物封装成的柔性压力传感器具有良好的传感性能.     

Surface-assembled highly flexible Na_3(VOPO_4)_2F nanocube cathode for high-rate binder-free Na-ion batteries

Flexible Na-ion storage cathodes are still very few due to the challenge in achieving both reliable mechanical flexibility and excellent electrochemical performances.Herein,a new type of flexible Na_3(VOPO_4)_2F cathode with nanocubes tightly assembled on carbon cloth is fabricated by a facile solvothe rmal method for the first time.The cathode is able to exhibit superior rate capability and stable cycling performa nce up to 1000 cycles,due to the surface-assembling of crystalline nanocubes on carbon fibers.In addition,it shows good mechanical flexibility,nearly no capacity decay is observed after continuous bending of 500 times.With this novel cathode and a directly-grown Na_2Ti_2O_5 anode,a fully binde r-free Na-ion battery is assembled.It can deliver a high wo rking voltage and increased gravimetric energy/power densities(maximum values:220.2 Wh/kg;5674,7 W/kg),and can power a LED indicator at bending angles fro m 0° to 180°.     

In situ X‐ray data collection and structure phasing of protein crystals at Structural Biology Center 19‐ID

A prototype of a 96‐well plate scanner for in situ data collection has been developed at the Structural Biology Center (SBC) beamline 19‐ID, located at the Advanced Photon Source, USA. The applicability of this instrument for protein crystal diffraction screening and data collection at ambient temperature has been demonstrated. Several different protein crystals, including selenium‐labeled, were used for data collection and successful SAD phasing. Without the common procedure of crystal handling and subsequent cryo‐cooling for data collection at T = 100 K, crystals in a crystallization buffer show remarkably low mosaicity (<0.1°) until deterioration by radiation damage occurs. Data presented here show that cryo‐cooling can cause some unexpected structural changes. Based on the results of this study, the integration of the plate scanner into the 19‐ID end‐station with automated controls is being prepared. With improvement of hardware and software, in situ data collection will become available for the SBC user program including remote access.     

高超声速平板边界层流动显示的试验研究

本文在高超声速脉冲式风洞内对基于纳米示踪的平面激光散射技术(nano-based planar laser scattering, NPLS)的应用进行了探索, 并在此基础上对平板边界层流动结构的精细测量进行了研究. 试验来流Ma=7.3, 总压4.8 MPa, 总温680 K. 通过时序的分析和调试, 对各分系统实现了高精度的同步控制; 定量的粒子注入及混合, 实现了粒子的均匀撒播, 对主流获得了均匀的显示效果; 对于边界层流动, 获得了精细的瞬态流动结构图像, 显示了层流到湍流的转捩过程, 并分析了其时空演化特性.     

Conservative numerical methods for the Full von Kármán plate equations

This article is concerned with the numerical solution of the full dynamical von Kármán plate equations for geometrically nonlinear (large‐amplitude) vibration in the simple case of a rectangular plate under periodic boundary conditions. This system is composed of three equations describing the time evolution of the transverse displacement field, as well as the two longitudinal displacements. Particular emphasis is put on developing a family of numerical schemes which, when losses are absent, are exactly energy conserving. The methodology thus extends previous work on the simple von Kármán system, for which longitudinal inertia effects are neglected, resulting in a set of two equations for the transverse displacement and an Airy stress function. Both the semidiscrete (in time) and fully discrete schemes are developed. From the numerical energy conservation property, it is possible to arrive at sufficient conditions for numerical stability, under strongly nonlinear conditions. Simulation results are presented, illustrating various features of plate vibration at high amplitudes, as well as the numerical energy conservation property, using both simple finite difference as well as Fourier spectral discretizations. © 2015 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 31: 1948–1970, 2015     

TNF-α、IL-6、IL-8在Modic I型改变腰椎终板与椎间盘髓核中的表达及关系研究

目的 探讨腰椎Modic I型改变的腰椎终板与椎间盘髓核中TNF-α、IL-6、IL-8 的相关性。方法 收集30 例因下腰痛入院手术治疗并行腰椎MRI 检查确认为腰椎Modic I型改变患者的术中病灶椎间盘标本,进行免疫组化检测,并观察椎间盘组织病理变化及炎症因子的表达,IL-6、IL-8 相对表达水平以相对表达量△Ct 或（2-△Ct×104）进行分析。结果 Modic I型终板中TNF-α表达水平（9.2±0.7）高于髓核（7.2±0.5）,差异有统计学意义（P＜0.05）;髓核中△Ct IL-6、△Ct IL-8 相对表达量（6.34±1.82、10.62±1.88）高于终板（4.07±1.86、5.92±1.31）,差异均有统计学意义（均P＜0.05）。结论 Modic I型终板中TNF-α、IL-6、IL-8的表达水平明显高于髓核,其引起下腰痛的原因主要为终板的炎症改变。     

使用曲面微通道板和感应电荷位置灵敏阳极的软X射线-极紫外光子计数成像探测器研究

本项目对我国空间探测的极紫外(EUV)波段大视场相机所需求的球面光子计数成像探测器的关键技术进行了研究。首先,建立了光阴极材料次级电子产出模型,利用该模型计算了软X射线-EUV波段常用的光电阴极材料—碱卤化物的次级电子产出,分析了微通道板(MCP)的次级电子产出。建立了测量MCP量子探测效率的装置,并推导出MCP量子探测效率的计算公式,测量了MCP在软X射线-EUV波段的量子效率以及MCP量子效率随掠入射角的变化。其次,建立了球面实芯微通道板的制备装置,利用高温热成型方法制备出曲率半径为150 mm球面MCP,利用光刻技术制备出有效直径为48 mm的楔条形感应电荷位置灵敏阳极,在此基础上集成了一套使用球面MCP和感应电荷位置灵敏阳极的两维光子计数成像探测器。再次,研制出包括快速前端模拟电路与后续数字电路的成像读出电路,编制了能矫正图像畸变的图像实时采集和处理软件。最后,建立了MCP探测器空间分辨率、图像线性的检测装置,对研制出的探测器性能进行了检测,检测结果表明:探测器的各项技术指标完全满足要求。     

Impact resistance analysis of flexible fabric by 3D shape of impact basin in low-speed impact test

Hopkinson non-penetrating low-speed impact test was carried out on Kevlar flexible fabrics. The impact basin was formed by the clay on the back of the fabric, and the ultimate deformation of the fabric was recorded completely. The 3D shape of the clay impact basin was measured by fringe projection profilometry and converted into the impact basin volume. At the same time, the relationship between the indentation volume and the deformation energy of the clay was calibrated using the clay intrusion test. The clay impact basin volume is then converted into the residual energy of the flexible fabric subjected to the low-speed impact, and a new index of the impact basin volume is established to evaluate the energy absorption efficiency of fabric under the low-speed impact. Finally, combined with the deformation of single-layer fabric, the stress wave propagation in the impact deformation process of fabric is discussed, which is helpful to understand the impact energy absorption mechanism of flexible fabric.     

可拉伸超韧水凝胶的制备和应用

综述了可拉伸超韧水凝胶的设计原理及其在组织工程和柔性电子器件领域的应用. 通过将网络结构层次、 化学结构、 增韧机制与宏观力学性能相结合, 重点讨论了单网络水凝胶、 双网络水凝胶、 纳米复合水凝胶及其它水凝胶等可拉伸超韧水凝胶的研究进展, 并总结和展望了新思路和新方向.     

Bent-core liquid crystal-functionalised flexible polymer substrates for liquid crystal alignment

ABSTRACT

A transparent flexible polymer film is chemically functionalised with a bent-core liquid crystal (BCLC) compound for effective alignment of the bulk BCLC sample at the substrate–LC interface. The surface attachment was achieved via a simple procedure which involved pre-treatment of the polymer film (commercial name: over head projector film) using piranha solution followed by chemically attaching the BCLC compound through silane condensation reaction. Surface characterisation of the unmodified and BC-modified flexible films was carried out through X-ray photoelectron spectroscopy (XPS), attenuated total reflectance fourier transform infrared (ATR-FTIR) spectroscopy, contact angle (CA) and atomic force microscopy (AFM) techniques. The BC-modified flexible substrates are analysed for their efficiency to orient the bulk LC sample. Remarkably, the chemically modified polymer substrates are highly efficient in vertically aligning both the BC and rod-like LC samples at the substrate–LC interface, in comparison to their unmodified counterparts. The described method is simple, reproducible, surface modified substrates are highly stable and more importantly reusable. The demonstrated method for the alignment of BCLCs advances a step forward towards the realisation of applications proposed for these fascinating compounds.