Emulsion polymerization of methyl methacrylate under pulsed microwave irradiation

Emulsion polymerization of methyl methacrylate (MMA) under pulsed microwave irradiation (PMI) with higher peak pulse power was studied. The effects of various parameters of PMI on the polymerization were analyzed and compared with that under conventional heating (CH) process. The results were summarized, as compared with that under CH, as follows. The amount of initiator used to reach constant conversion reduced by 50% at the same polymerization time; at the same initiator concentration 0.15 and 0.2 wt.%, the polymerization rate increased by 131% and 163%, respectively. The molecular weight of polymer obtained was 1.1-2.0 times larger than that under CH; at the same irradiation energy, the conversion achieved using a lower pulse power was greater than that using a higher pulse power. There seemed to be a factor of the irradiation energy efficiency; in other words, for the monomer conversion, the irradiation energy of low pulse power had a higher efficiency. The conversion achieved using a 3.5 μs pulse width was almost the same as that using a 1.5 μs pulse width. The results indicated that PMI had a significant non-thermal effect on the emulsion polymerization of MMA so as to effectively enhance the polymerization rate. The glass transition temperature (T_g), the polydispersity index (PDI) and the regularity of the polymer obtained using two processes were similar, indicating that the physical properties and microstructure of the polymer were not modified by the use of microwaves.     

Copolymerization of butadiene and styrene with a gadolinium tricarboxylate catalyst

Homo- and copolymerizations of butadiene (BD) and styrene (St) were carried out by gadolinium catalysts having various tricarboxylate ligands [Gd(OCOR)₃: R = CH₃, CH₂Cl, CHCl₂, CCl₃, and CF₃], to investigate the effects of ligands and discuss the cis polymerization mechanism. Polymerization of BD with Gd(OCOR)₃—(i—Bu)₃Al—Et₂AlCl catalysts was carried out in hexane at 50°C. By each catalyst, poly(BD) having a high cis content (cis = 97–99%) in 22–85% yields for 2–24 h were obtained. The ligands with low pKa values increased the polymerization activity as follows: R of Gd(OCOR)₃: CF₃ > CCl₃ > CHCl₂ > CH₂Cl ～ CH₃. On the other hand, in the polymerization of St or copolymerization of BD and St under similar conditions, the highest activity was attained by a Gd(OCOCCI₃)₃- based catalyst. The difference in the optimum ligand among the homo- and copolymerization of BD and St was discussed on the basis of energy levels of the catalysts. In the copolymers of BD and St, the cis-1,4 content of the BD unit decreased with increasing St content. Furthermore, according to the diad analysis of copolymers (St content ～ 14.5 mol %) by ¹³C NMR spectroscopy, the low cis value of the BD unit was observed in the St-BD diad (cis/trans/vinyl = 24/53/23), while the high cis value of the BD unit remained in the BD-BD diad (cis/trans/vinyl = 89/10/1). These results suggest that the terminal BD unit is controlled by the cis configuration by the coordination between the penultimate cis vinylene unit and the gadolinium metal catalyst, whereas the presence of the penultimate St unit interferes with cis polymerization of the terminal BD unit. The difference in the coordination mechanism in the course of polymerization between rare earth metal and transition metal catalysts such as the Ni(acac)₂ and Co(acac)₃-based catalyst was also discussed. © 1995 John Wiley & Sons, Inc.     

Effect of initiators on grafting in the initial stage of the emulsion polymerization of methyl methacrylate using poly(vinyl alcohol) as a protective colloid

 To make clear the reason of unsuitability of poly(vinyl alcohol) (PVA) protective colloid for the emulsion polymerization of conjugated monomers, a model experiment of emulsion polymerization of methyl methacrylate (MMA) was carried out with ammonium persulfate (APS) or azobis(isobutyronitrile) (AIBN) initiators, where a small amount of MMA (1/100th of the concentration compared with ordinary emulsion polymerization) was employed. This corresponds to the initial stage of the emulsion polymerization. Grafting of MMA onto PVA took place remarkably irrespective of the kind of the initiators. Formation of homo-poly(MMA) was observed to a small extent. The formation of new emulsion particles smaller than 100 nm continued to increase to almost the end of the polymerization. PVA molecules in the grafted polymer are supposed to act as stabilizers of newly formed particles. From kinetic treatment using the experimental data, the important issues were derived as follows. Firstly, the sulfate anion radical from APS is much more reactive than the isobutyronitrile radical from AIBN in terms of hydrogen abstraction from PVA. Secondly, high grafting ability of the latter initiator system, notwithstanding the much lower reactivity in the hydrogen abstraction compared with the APS system, is attributed to the relative reactivity of the primary radicals, i.e., hydrogen abstraction reaction from PVA to initiation reaction with MMA. The much slower rate of addition of the isobutyronitrile radical to the monomer compared with that of hydrogen abstraction from PVA facilitates the grafting, although the rate constant of hydrogen abstraction is far smaller than that with the sulfate anion radical by 10⁻⁴ times. Received: 26 April 2001 Accepted: 6 September 2001     

新型螺环单体的合成和自由基聚合反应的研究

新型螺环单体的合成和自由基聚合反应的研究王宏鲁剑涛冯品珍（中国科学技术大学研究生院化学部北京１０００３９）关键词自由基聚合，新单体合成，螺环单体，自由基共聚虽然离子型开环聚合早已为人熟知，但是自由基开环聚合反应的研究和应用开发还刚刚起步．...     

乳状液法制备憎液溶胶Ⅰ.BaCO_3均匀粒子的制备

均匀胶体粒子的形成，除与反应条件（反应物浓度、陈化时间和温度、介质种类等）有关外，反应体系的环境也影响最终产物的形态，《至结晶结构．气溶胶法和微乳液法正是利用微环境中的‘水池效应”；分别制备出球形亚微米和纳米级的均匀粒子［‘－‘］、这些方法与水解法和相转化法等方法比较，反应物浓度要大几个数量级，而反应时间却短很多，因而受到研究人员的关注．乳状液也能提供亚微米、微米及以上级的微环境，因此，可以应用O／W乳状液乳液中的聚合反应制备亲液的分散体系．然而，极少有关利用w／O乳状液制备僧液溶胶的报导问；最近…     

Graft copolymerization of methyl acrylate onto potato starch initiated by ceric ammonium nitrate

A study was made of the ceric ammonium nitrate (CAN) initiated graft copolymerization of methyl acrylate (MA) onto potato starch. The variables affecting the graft were investigated. The optimums have been obtained; they are the concentrations of MA, CAN, and nitric acid (HNO₃) (1.08, 5.0 × 10^?3, and 0.081 mol/L, respectively). The reaction temperature is ca. 50°C and the reaction time is 2 h. The molecular weight of grafted poly(methylacrylate) has been determined. On the basis of experimental results, the mechanism of grafting has been explored, a new kinetic equation of the graft copolymerization is established: R_p = Kk_d [STOH] [Ce⁴⁺] + Kk_pk_d/k_t[STOH][M], where K, k_d, k_p, and k_t are constants. The equation fits the results of experiments. © 1993 John Wiley & Sons, Inc.     

Probing in vitro digestion at oil–water interfaces

Interfacial layers have been widely applied to study the formation and stability of emulsion-based systems. However, the application of isolated interfaces to address digestibility of emulsions is often limited because of the complexity of experimental methods and results. This review summarizes the latest developments in analytical methods and literature data on effects of digestion on interfacial layers. Particular emphasis is given to understand the changes on interfacial magnitudes during oral, gastric, and duodenal digestion, either applied separately or sequentially. Limitations of interfacial aspects and key factors that influence emulsion microstructure in bulk and lipid digestion are identified. Understanding the behavior of interfacial layers upon gastrointestinal digestion promotes an accurate tracking of the physiological fate of emulsions.     

反应性复合乳液的合成、表征及其交联反应

利用种子半连续乳液聚合方法合成了核层或壳层带有环氧基以及壳层带有羧基的3种不同核/壳结构的乳胶粒子,通过物理共混带环氧基和羧基的乳胶粒子,得到了两种反应性复合乳液.利用透射电镜和激光动态光散射对乳胶粒子进行了表征,其粒径分布较窄,粒径分布的多分散系数为0.062,平均粒径约76 nm,乳胶粒子具有明显的核/壳结构.通过胶膜的凝胶率和膨胀率的测定和红外光谱分析对反应性复合乳液中乳胶粒子的扩散及交联反应进行了研究,并探讨了不同核壳结构复合乳液对涂膜机械性能的影响.研究表明,当反应性复合乳液中的环氧基和羧基分别分布在乳胶粒子的核层和壳层时,有利于聚合物分子链的充分扩散和化学交联反应的进行,从而提高涂膜的物理化学性能,当甲基丙烯酸缩水甘油酯(GMA)含量为10 wt%时,涂膜的拉伸强度达20.3 MPa.     

Synthesis and characterization of cationic amino functionalized polystyrene latexes

Amino-functionalized latex particles were obtained batchwise by emulsion copolymerization of styrene and vinylbenzylamine hydrochloride (VBAH) in the presence of 2-2-Azobis(2-amidinopropane) HCl (V50). Size monodispersity of the particles was improved by using divinylbenzene (DVB) as a third monomer at a 2% molar ratio. Surface amino group titration was performed spectrometrically with N-succinimidyl 3-(2 pyridyldithio)propionate (SPDP). The yields of functional monomer incorporation were up to 85%.     

等离子体辐照的聚乙烯表面接枝交联共聚合

聚合物利用低温等离子体预辐照进行表面接枝共聚合已有报道.此方法的优点是接枝层被限制在聚合物表面,辐照过程对基材本体性质无影响,且整个过程对环境无污染. 用等离子体使聚合物表面产生自由基,不需要表面具有不饱和键或特殊官能团,因而适用于任何聚合物,甚至于一些无机物如玻璃等.利用等离子辐照后暴露于空气的聚合物表面上生成的过氧自由基或过氧化物进行接枝反应,一般接枝量不大.本工作中,我们自己设计了反应器,以超高分子量聚乙烯(UHMWPE)为基材,以甲基丙烯酸甲酯(MMA)为接枝单体,在无氧条件下利用等离子体辐照产生的表面自由基进行了接枝聚合,产物接枝量高达10％.还用顺磁共振技术对表面自由基性质及其在接枝过程中的行为进行了跟踪研究.