30GHz RF脉冲压缩器设计

 为得到脉宽150ns，功率超过100MW的30GHz微波脉冲，采用MSLED-II原理设计了30GHz RF-脉冲压缩器。H-Hybrid，TE₁₀0^口-TE₁₀^o模式转换器等器件都采用了新型设计，所有微波器件的设计充分考虑了高功率下的适用性，没有容易引起打火的调谐杆、容性膜片等部件。在微波器件的设计中用HFSS软件进行了详尽的模拟。加工并测试了H-Hybrid，且用在CERN的RF脉冲展宽器上。     

一个新型电子直线加速器的预制研究

文中给出了对一个新型紧凑的电子直线加速器(linac)证明原理的研究结果.在该linac中,通过偏转磁场选择特定能量和相位的大功率速调管用毕束流,然后将它们注入到加速节中,同时使速调管工作在自激振荡状态,使传统linac上的许多部件都可以省去.据此建成的linac的结构简单、维护容易、性能良好、造价经济.因此实现这种具有众多优点的新型linac将有助于linac应用的推广.要实现这样的linac有许多关键的问题需要解决.电子束团的性能参量,如能量、电流、发射度,以及速调管自激振荡的频率稳定度等都必须符合加速的要求.文中给出的计算机模拟和实验结果都表明了实现这种新型的linac的可行性     

光阴极RF腔注入器束流发射度研究

 分析了光阴极RF腔注入器中的RF场效应和空间电荷效应，给出了电子在加速腔中束流发射度的解析表达式，它说明在加速过程中束流发射度是振荡变化的。利用SUPERFISH和GPT程序模拟计算了光阴极1+1/2腔注入器输出束流发射度与加速场强、注入相位、束团大小和形状、束团电荷的关系。适当选择这些条件，可以获得横向发射度小于2πmm·mrad 的输出束流。     

HM-J16双光子电子直线加速器

简要叙述了 HM-J1 6加速器的设计思想和设计特点。设计了一台采用射频功率反馈的射线能量范围为 6～ 1 6Me V的双光子电子直线加速器。其最大辐射野为 4 0 cm× 4 0 cm,双光子剂量率均大于3 60 c Gy/ (min·m)。     

A radiofrequency plasma in a polydimethylsiloxane (PDMS) microchip

This is the first report of an analytical plasma in a polymer (polydimethylsiloxane, PDMS) microchip. The plasma channel has dimensions 2 mm diameter × 50 mm long, is operated at atmospheric pressure in Ar, 27.12 MHz and 70 W, and is viewed axially through a purged fiber optic cable. CF₄ gas at 0.1% in argon yields mainly C₂ emission bands. This PDMS microchip is manufactured easily, inexpensive, and more tolerant to fluorocarbons than microchip plasmas in silica. Based on these initial results, this PDMS microchip plasma could become useful as a sensor for the fluorocarbon gases emitted in semiconductor process or as a gas chromatography (GC) detector for potential application.     

4G手机无线接入系统设计及实现

用射频微波电路集成技术设计第4代(4G)手机无线接入系统．从分布参数概念出发，主要在smith圆图上进行电路设计．由微带线进行电路的实现，电路将各功能单元集成在微带基板上，具有体积小、重量轻、可靠性高、与手机其他电路易于共形等特点．运用网络转移参量矩阵理论进行了系统响应预估，结果表明所设计的无线接入系统满足4G移动终端的性能要求．     

1.6Cell光阴极微波电子枪冷测及初步高功率实验研究

介绍了清华大学加速器实验室BNL/KEK/SHI型1.6cell微波枪调谐以及老练的初步结果. 调谐过程中, 测量了耦合孔尺寸与外部品质因数之间的关系; 给出了0模和π模的频率、单腔频率以及场分布. 目前, 该微波电子枪正在进行高功率微波老练, 给出了该枪初步的微波老练的情况及测量结果.     

Driver gas contaminationin a detonation-driven reflected-shock tunnel

A computational study has been carried out to examine the effects of driver gas contamination in the NASA HYPULSE facility at GASL when operating with a detonation driver in reflected-shock tunnel mode. Unlike high-enthalpy shock tunnels which use helium as a driver gas, the driver gas in a detonation driver consists of a mixture of water vapour and argon, which has very different chemical and thermodynamic properties than those of helium. The purpose of the present work is to quantitatively evaluate the effects of driver gas contamination on the flow properties in the test section. Two computational analyses have been performed. The first analysis examined the nozzle flow under the influence of a prescribed level of driver gas contamination. In the second analysis, the transient development of the driver gas leakage in the reflected-shock region in the shock tube is studied. The unique flow features brought about by the detonation-driver gas and the method for detecting the contamination are discussed.Received: 6 August 2002, Revised: 22 September 2003, Published online: 10 February 2004Correspondence to: R.S.M. ChueAn abridged version of this paper was presented at the 23rd International Symposium on Shock Waves at Fort Worth, Texas, July 23 to 27, 2001     

一种新的运动激波--非定常边界层相互干扰现象

本文探讨了一种新的激波－非定常边界层相互干扰现象，这种激波－边界层干扰现象既不同于定常激波－边界层干扰现象，又不同于激波在端面反射后与该激波所诱导的边界层之间的干扰现象，而是运动激波与稀疏波和第一激波所诱导的非这常边界层之间的干扰现象，本文对这种现象用微波动力学理论进行分析，并把这种干扰现象看成激波的绕射现象，同时在稀疏波破膜的双驱动激波管中进行实验观察，最后把理论分析与实验观察进行了比较。     

EAST �����ɶ��ڿ���е�۵����˶�ѧ�㷨�о�

为了实现 EAST 装置真空室内的内窥多关节机械臂的实时高精度控制,提出了一种逆运动学算法,即建立机械臂多变量的方程组,转化成为矩阵的特征值问题求解。为了验证和满足实际控制的需要,还基于 VC++6.0 开发了 MFC 运动学算法程序。结果表明,该算法能在 ms 级别内得到机械臂的所有运动学逆解。