Equilibrium folding and unfolding dynamics to reveal detailed free energy landscape of src SH3 protein by magnetic tweezers

Src SH3 protein domain is a typical two-state protein which has been confirmed by research of denaturant-induced unfolding dynamics. Force spectroscopy experiments by optical tweezers and atomic force microscopy have measured the force-dependent unfolding rates with different kinds of pulling geometry. However, the equilibrium folding and unfolding dynamics at constant forces has not been reported. Here, using stable magnetic tweezers, we performed equilibrium folding and unfolding dynamic measurement and force-jump measurement of src SH3 domain with tethering points at its N-and C-termini. From the obtained force-dependent transition rates, a detailed two-state free energy landscape of src SH3 protein is constructed with quantitative information of folding free energy, transition state barrier height and position,which exemplifies the capability of magnetic tweezers to study protein folding and unfolding dynamics.     

Magnetic shielding property for cylinder with circular,square, and equilateral triangle holes

The shielding property of cylinder with circular, square, and equilateral triangle holes was investigated by finite element analysis(FEA). The hole area(S_(hole)) plays an important role in magnetic circuit on the surface of cylinder. When Sholeis less than the critical area(S_H), cylinder with three shapes of holes obtained the same remanent magnetization inside,indicating that the shielding property is unaffected by the shape of the hole. Hence, high-permeability material is the major path of the magnetic field. On the condition of S_(hole) S_H, the sequence of the shielding property is equilateral triangle square circular, resulting from magnetoresistance of leakage flux in air dielectric. Besides, the anisotropy of shielding property caused by hole structural differences of the cylinder is evaluated. We find that a good shielding effectiveness is gained in the radial direction, compared with the axis direction. This research focuses on providing a theoretical support for the design of magnetic shield and improvement on the magnetic shielding ability.     

An Ultrasensitive Virus ELISA Based on a magnetic Mesoporous Silica Nanoprobe

Detection of infectious viruses relies on quantitative polymerase chain reaction (qPCR). However, qPCR requires costly equipment, a clean operating environment and experienced technicians, limiting its wide applicability. On the other hand, enzyme-linked immunosorbent assay (ELISA) is widely used in biological laboratories due to its relatively high sensitivity and ease of operation. However, ELISA-based detection of the virus is hampered because it is lower sensitive than qPCR. Herein, a nanoprobe ELISA (NP-ELISA) based on a mesoporous silica nanoprobe, which is constructed by first being loaded with peroxidase and further coated with positively charged polymer polyethyleneimine, and finally functionalized with antivirus antibodies, is designed. Results show that each NP probe is encapsulating 170 peroxidase molecules and presents 200 antibody molecules on the surface. The limit of detection (LOD) of NP-ELISA (LOD = 1450 PFU mL⁻¹) for the detection of real virus samples is tenfold sensitive than that of standard ELISA (LOD = 14, 414 PFU mL⁻¹) and the assay time for NP-ELISA is reduced by 1 h as compared with standard one. Therefore, the NP-ELISA provides a rapid and sensitive immunoassay platform that can readily be implemented for biological laboratory research as well as for on-site clinical diagnostics.     

环形磁场金属等离子体源冷却流场的数值模拟与优化

环形磁场金属等离子体源作为一种全新的等离子体源结构,可用于产生高度离化、无大颗粒、高密度的离子束流,但传统流道结构不能保证其高效、均匀散热,大功率工作时可能引起密封胶圈的烧蚀失效,需对其冷却流场进行优化设计.利用Solidworks Flow Simulation软件对等离子体源冷却流道进行模拟,分析出入水孔分布角度、孔数、孔径以及入水孔高度对冷却效果的影响规律,并对流道结构参数进行优化.结果表明,增大水孔的周向分布范围,有利于提高散热的均匀性;入水孔设置在结构上层有利于减少冷却水的温度分层现象,使铜套和密封胶圈都处于较好的冷却状态;适当减小孔径有利于增大冷却水射流速度,增大湍流程度强化传热,提高换热效率.优化后的流场结构可以提高冷却水的利用率,在相同流量条件下获得更好的冷却效果,改善等离子体源的放电稳定性,为环形磁场金属等离子体源的冷却结构设计提供理论依据.     

Magnetic anisotropy manipulation and interfacial coupling in Sm3Fe5O12 films and CoFe/Sm3Fe5O12 heterostructures

The magnetic anisotropy manipulation in the Sm₃Fe₅O₁₂ (SmIG) films and its effect on the interfacial spin coupling in the CoFe/SmIG heterostructures were studied carefully. By switching the orientation of the Gd₃Ga₅O₁₂ substrates from (111) to (001), the magnetic anisotropy of obtained SmIG films shifts from in-plane to out-of-plane. Similar results can also be obtained in the films on Gd₃Sc₂Ga₃O₁₂ substrates, which identifies the universality of such orientation-induced magnetic anisotropy switching. Additionally, the interfacial spin coupling and magnetic anisotropy switching effect on the spin wave in CoFe/SmIG magnetic heterojunctions have also been explored by utilizing the time-resolved magneto-optical Kerr effect technique. It is intriguing to find that both the frequency and effective damping factor of spin precession in CoFe/SmIG heterojunctions can be manipulated by the magnetic anisotropy switching of SmIG films. These findings not only provide a route for the perpendicular magnetic anisotropy acquisition but also give a further path for spin manipulation in magnetic films and heterojunctions.     

Oxygen vacancy control of electrical,optical, and magnetic properties of Fe0.05Ti0.95O2 epitaxial films

High-quality Fe-doped TiO₂ films are epitaxially grown on MgF₂ substrates by pulsed laser deposition. The x-ray diffraction and Raman spectra prove that they are of pure rutile phase. High-resolution transmission electron microscopy (TEM) further demonstrates that the epitaxial relationship between rutile-phased TiO₂ and MgF₂ substrates is 110 TiO₂₂. The room temperature ferromagnetism is detected by alternative gradient magnetometer. By increasing the ambient oxygen pressure, magnetization shows that it decreases monotonically while absorption edge shows a red shift. The transport property measurement demonstrates a strong correlation between magnetization and carrier concentration. The influence of ambient oxygen pressure on magnetization can be well explained by a modified bound magnetization polarization model.     

原位核磁共振技术研究光催化甲醇重整过程中甲醇与水的相互作用

本文利用原位液体核磁共振技术对真实固液体系光催化甲醇重整过程中水与甲醇之间的相互作用进行了系统性研究,证实了甲醇+水体系中氢键及质子交换相互作用的存在,并且发现催化剂的种类（包括不同晶型,以及同一晶型、不同形貌的TiO₂）、体系温度、光照反应条件都会影响甲醇与水之间的相互作用,进而影响到甲醇重整的效率．这表明催化剂及温度的合适选择对于提升甲醇重整效率起到非常重要的作用．     

高场磁共振成像1H/31P双调谐射频线圈研究进展

在众多可产生磁共振现象的原子核中,¹H核凭借其在生物体中含量高、磁共振信号强的优势,成为磁共振成像的主要研究对象．但其它杂核在生命科学相关研究中同样具有不可替代的独特性,如³¹P核广泛参与了生物体内的能量代谢过程,是非质子成像研究领域的重要内容．MRI向更高场强的发展使得杂核成像逐渐普及,其核心部件是高质量的¹H/³¹P双调谐射频线圈．本文总结了与¹H/³¹P双调谐射频线圈相关的研究与应用,展示了9.4 T下小鼠脑的质子磁共振成像及磁共振磷谱,并讨论了高场¹H/³¹P双调谐射频线圈的潜在应用价值．     

垂直各向异性Ho3Fe5O12薄膜的外延生长与其异质结构的自旋输运

垂直磁各向异性稀土-铁-石榴石纳米薄膜在自旋电子学中具有重要应用前景.本文使用溅射方法在(111)取向掺杂钇钪的钆镓石榴石(Gd_0.63Y_2.37Sc₂Ga₃O₁₂,GYSGG)单晶衬底上外延生长了2—100 nm厚的钬铁石榴石(Ho₃Fe₅O₁₂,HoIG)薄膜,并进一步在HoIG上沉积了3 nm Pt薄膜.测量了室温下HoIG的磁各向异性和HoIG/Pt异质结构的自旋相关输运性质.结果显示,厚度薄至2 nm的HoIG薄膜(小于2个单胞层)在室温仍具有铁磁性,且由于外延应变,2—60 nm厚HoIG薄膜都具有很强的垂直磁各向异性,有效垂直各向异性场最大达350 mT;异质结构样品表现出非常可观的反常霍尔效应和“自旋霍尔/各向异性”磁电阻效应,前者在HoIG厚度小于4 nm时开始缓慢下降,而后者当HoIG厚度小于7 nm时急剧减小,说明相较于反常霍尔效应,磁电阻效应对HoIG的体磁性相对更加敏感;此外,自旋相关热电压随HoIG厚度减薄在整个厚度范围以指数方式下降,说明遵从热激化磁振子运动规律的自旋塞贝克效应是其主要贡献者.本文结果表明HoIG纳米薄膜具有可调控的垂直磁各向异性,厚度大于4 nm的HoIG/Pt异质结构具有高效的自旋界面交换作用,是自旋电子学应用发展的一个重要候选材料.