Spectrophotometric flow-injection determination of zinc in plant digests based on a spot test

A spot test was implemented in a flow-injection system for the spectrophotometric determination of zinc in digests of plant materials. It is based on the influence of Zn²⁺ on the oxidation rate of 1-naphthylethylenediamine (NED) by hexacyanoferrate(III) under acidic conditions. In order to control the precipitate formation and to maintain the resulting suspension, a micellar medium was established by adding Triton X-100. The proposed system handles about 65 samples per hour, meaning 72 μg NED and 9.0 mg K₃[Fe(CN)₆] per determination. Baseline drift is usually <0.01 absorbance per hour and the analytical signals for 0.5-2.5 mg l⁻¹ Zn range within ca. 0.07-0.45 absorbance. Linearity of the analytical curve is fair (r>0.999, n=6) and detection limit was estimated as 0.2 mg l⁻¹ Zn. Results are precise (R.S.D.<1%, n=10) and in agreement with flame atomic absorption spectrometry and with certified values of standard reference materials.     

钒与新显色剂 1,4-双肼酞嗪显色反应的研究及应用

研究了钒与新显色剂 1,4-双肼酞嗪的显色反应.在 pH 5.8 的 HAc-NaAc 缓冲溶液中,加入溴化十六烷基三甲铵于 60℃加热 10 min,钒与 1,4-双肼酞嗪形成稳定的螯合物,λmax=422nm,ε422=1.32×104 L·mol-1·cm-1,钒的浓度在 0 μg/25 mL～20 μg/25 mL 范围内符合比耳定律,检出限为 15 ng/mL,已用于测定钢样中的微量钒.     

Selective spectrophotometric determination of TNT in soil and water with dicyclohexylamine extraction

Contaminated land and groundwater remediation in military waste dumping sites often necessitates the use of simple, cost-effective, and rapid tests for detecting trinitrotoluene (TNT) residues in the field along with their dinitro-analogues. A simple, rapid, low-cost, and field-adaptable (on-site) colorimetric method was developed for quantifying TNT in the presence of RDX, PETN, picric acid, 2,4-DNT (dinitrotoluene), dinitrophenol, and dinitroaniline. Most commercialized methods for TNT assay-with the exception of Cold Regions Research and Engineering Laboratory of the U.S. Army (CRREL) method-use proprietary chemicals, and the color stability and intensity are highly dependent on the composition of the organic solution comprised of acetone or methanol. The developed colorimetric method is based on the extraction of TNT from water-acetone solution into an organic solvent mixture of dicyclohexylamine (DCHA)-isobutyl methyl ketone (IBMK) (10:1, v/v), filtration through a filter paper into a stoppered optical cell containing anhydrous sodium sulfate, and measurement of the absorbance of the organic extract at 531 nm after 5 min. The red-violet color of the extract was due to intermolecular charge-transfer (CT) between the electron attracting TNT and electron-donating DCHA, and the molar absorptivity for TNT in final organic solution was (1.16 ± 0.02) × 10⁴ L mol⁻¹ cm⁻¹.The R.S.D. of the slope of calibration line was 0.7%. The LOD of the method in the final organic phase was 0.38 μM TNT, and LOD values expressed on the basis of original soil TNT content were 0.5, 1.3, and 1.5 ppm (μg g⁻¹) for clay, loamy clay, and sandy soils, respectively. Unlike other spectrophotometric methods, the developed assay was basically tolerant to common cations and anions found in soil and water at 100-fold weight ratios, and to soil humic acids. Among a number of compounds that may be encountered in polynitro-explosive storage and waste reclaimation sites such as picric acid, dinitrophenol, 2,4-dinitrotoluene, dinitroaniline, RDX, PETN, and tetryl, only tetryl interfered with the developed TNT assay. Water tolerance and exploitability over a wide pH range were other superiorities over the CRREL method. The CT-complex was relatively stable, as the absorbance of the organic extract was not significantly influenced from the dilution of the water-acetone phase. Aside from the extractive-photometric procedure established for aqueous solutions, a simulated field colorimetric assay for TNT directly applicable to soil was also devised, based on direct color development in a 4:1 (v/v) acetone-dicyclohexylamine organic extract of soil at a liquid-to-solid ratio of 5 mL g⁻¹.     

壳聚糖的光度测定新方法

研究了以刚果红分光光度法测定壳聚糖，探讨了最佳实验条件及干扰因素的影响。在pH9．7时，刚果红和壳聚糖形成有色物质，检测波长为543．5nm，线性方程为：A=0．0200ρ＋0．0156，R^2=0．9978。在0～20．00μg／mL范围内呈现良好的线性关系，平均回收率为99．20％。采用该方法测定了两种复方样品中的壳聚糖，方法的选择性和灵敏度良好。该方法可用于检测复方样品中少量的壳聚糖。     

meso-四(对-磺酸基苯基)卟啉与痕量铋(Ⅲ)显色反应的研究

本文研究了在催化剂Hg(Ⅱ)存在下,meso-四(对-磺酸基苯基)卟啉与铋(Ⅲ)的显色反应。在室温下,在弱酸性介质中,反应在7min内完成。配合物的最大吸收波长为462nm,表观摩尔吸光系数为3.78×10~5L·mol~(-1)·cm~(-1)。Bi(Ⅲ)含量在0～10μg/mL范围内符合比尔定律。配合物的组成为Bi(Ⅲ):TPPS_4=2:3。是目前测定Bi(Ⅲ)灵敏度最高的显色反应之一。用于矿样中痕量铋(Ⅲ)的测定获得了较为满意的结果。     

偏最小二乘光度法同时测定多种酚的研究及应用

利用Ｃｕ（Ⅱ）吡啶能与酚形成稳定的三元配合物的特点，研究了Ｃｕ（Ⅱ）－吡啶－酚三元显色新体系，并以偏最小二乘法建立模型预测，同时测定了模拟水样和环境水样中的对苯二酚、间苯二酚、邻苯三酚和对硝基苯酚，取得满意效果。     

两次双波长分光光度法同时测定钴、镍、铜

本文用两次双波长分光光度法实现了三组分混合体系的同时测定。结果表明,两次双波长测量信号△A_1和△A_2的线性组合与混合体系中各组分浓度呈线性关系。该法用于钻、镍、铜三组分同时测定,定量结果令人满意。     

吸光度比值分光光度法测定复方氯唑沙宗片中氯唑沙宗和对乙酰氨基酚

根据吸光度比-光谱曲线,选定215.7 nm及264.1 nm作为测定氯唑沙宗(CRXZ)和对乙酰氨基酚(ACAP)的波长对。制备标准曲线时,首先配制由CRZX和ACAP基准物配制的标准溶液和由两者配成的混合标准系列,并在上述两波长处分别测得各试液的吸光度,再用文中提供的公式计算吸光度比值R和吸光度之差ΔR,最后建立ΔR对CRZX或ACAP浓度之间的线性回归方程。分析试样时,取复方氯唑沙宗片适量溶于溶剂中并定量稀释。分取部分试液按制备标准曲线的方法测得试液的吸光度并计算其比值R和ΔR。根据相应回归方程计算相应组分的含量。精密度及回收率试验所得结果的RSD(n=7)值为1.28%(CRXZ)及0.84%(ACAP),两者的平均回收率均为100.0%。     

稀土-二安替匹啉甲烷-I~--CHCl_3选择性萃取铁镍合金中稀土元素及其测定

本文提出用CHCl_3选择性萃取稀土-二安替匹啉甲烷-I~三元络合物的方法,从铁、镍合金中分离微量稀土元素,借偶氮胂Ⅲ光度测定。本文较为详细地研究了稀土三元络合物的定量萃取条件及Cu(Ⅱ).W(Ⅵ)对萃取的影响等。在确定的最佳分离及测定条件下,大多数金属离子不干扰测定。方法的测定下限为0.001%RE,相对标准偏差小于8.0%。     

Use of p-dimethylaminobenzalhyde as a colored reagent for determination of procaine hydrochloride by spectrophotometry

Spectrophotometric determination of procaine hydrochloride is described. The procaine hydrochloride reacts with p-dimethylaminobenzalhyde in glacial acetic acid to form an Schiff base which is a yellow compound, and its maximum absorption wavelength is at 455nm, ₄₅₅=3.46×10⁴. The absorbance for procaine hydrochloride from 0.2 to 15 μg ml⁻¹ obeys Beer's law. The linear regression equation of the calibration graph is C=5.866A−0.02, with a linear regression correlative coefficient is 0.9994 and relative standard deviation (RSD) of 1.7%; the detection limit is 0.1 μg ml⁻¹; recovery is from 92.0 to 110.0%. Effects of reaction medium, temperature, gentamycin, beneylpenicillin, kanamycin, streptomycin, foreign ions, and stand for time on the determination of procaine hydrochloride have been examined. The results obtained by this method agreed with those by the official method (dead-stop titration). This method is rapid and simple, and can be used for the determination of procaine hydrochloride in injection solution of procaine hydrochloride.