Tetrahalidometallate(II) Ionic Liquids with More than One Metal: The Effect of Bromide versus Chloride

Fifteen N-butylpyridinium salts – five monometallic [C₄Py]₂[MBr₄] and ten bimetallic [C₄Py]₂[M_0.5^aM_0.5^bBr₄] (M=Co, Cu, Mn, Ni, Zn) – were synthesized, and their structures and thermal and electrochemical properties were studied. All the compounds are ionic liquids (ILs) with melting points between 64 and 101 °C. Powder and single-crystal X-ray diffraction show that all ILs are isostructural. The electrochemical stability windows of the ILs are between 2 and 3 V. The conductivities at room temperature are between 10⁻⁵ and 10⁻⁶ S cm⁻¹. At elevated temperatures, the conductivities reach up to 10⁻⁴ S cm⁻¹ at 70 °C. The structures and properties of the current bromide-based ILs were also compared with those of previous examples using chloride ligands, which illustrated differences and similarities between the two groups of ILs.     

Concurrent detection of cabozantinib as an anticancer agent and its major metabolites in human serum using fluorescence-coupled micellar liquid chromatography

A novel, highly sensitive, simple, and rapid strategy was designed and developed for simultaneous determination of cabozantinib (CBZ) as an anticancer agent and its main metabolites including monohydroxy sulfate (EXEL-1646), N-oxide (EXEL-5162(, amide cleavage product (EXEL-5366), and 6-desmethyl amide cleavage product sulfate) EXEL-1644). Measurements were done through a micellar liquid chromatography (MLC) method coupled with fluorescence detection. The high-performance liquid chromatography (HPLC) was performed using a Kinetex C18 100 Å column as well as acetonitrile, cetyltrimethylammonium bromide (CTAB; 0.2 mol.L^?1), and tris buffer (pH 8.5) solutions as the mobile phase at a 40:50:10 (v/v) ratio. The method’s linearity (20 to 700 ng.mL^?1), limit of detection (LOD; 2.11 to 3.69 ng.mL^?1), limit of quantification (LOQ; 20 to 30 ng.mL^?1), intra- and inter-day precisions (RSD < 4.00%), selectivity, recovery, and robustness were fully evaluated. According to the obtained results, the developed method can be used for simple and rapid (~35 min) quantification of CBZ as an anticancer drug and its major metabolites in human serum samples with high sensitivity and low cost.     

Determination of thermodynamic parameters for cloud point extraction of Arsenazo-III and Magdala Red dyes using mixed micelles: An essential requirement for high performance

A simple and low cost method for extraction and preconcentration of Arsenazo-III (ARS-III) and Magdala Red (MR) was developed by an efficient cloud point extraction (CPE) method using mixed micelles of Triton X–114 (TX–114) and cetyltrimethyl ammonium bromide (CTAB). Various parameters, such as pH/concentration of H₂SO₄, surfactant concentrations (TX-114 and CTAB), equilibrium temperature and time have been studied to maximise efficiency. Thermodynamic quantities like change in Gibbs free energy (ΔG⁰), change in enthalpy (ΔH⁰) and change in entropy (ΔS⁰) were calculated. The results show that the CPE of ARS-III and MR dye is feasible, spontaneous, and endothermic in the temperature range of (50–80) °C indicating good recoveries for the developed method. The effect of temperature, surfactant concentration and dye concentration on various thermodynamic quantities was investigated and it was found that ΔG⁰ values increased with temperature but decreased with surfactant and dye concentration. ΔH⁰ and ΔS⁰ values increased as surfactant concentration increased and decreased as dye concentration decreased. The recoveries were found to be the range from 90.02 – 101.03 % for ARS-III and 86.07–99.46 % for MR dyes which proves that the method is highly efficient.     

A conductive anionic Co-MOF cage with zeolite framework for supercapacitors

Conductive MOFs could exhibit full potential as integrated electrode materials for supercapacitors without interference from additional conductive additives. Here we report an anionic Co-MOF cage with zeolite framework, which was balanced by the redox-active guest [Co(H₂O)₆]²⁺ and protonated [(CH₃)₂NH₂]²⁺ ions. Benefit from the unique ion skeleton structure, Co-MOF exhibits a conductivity higher than most of reported MOFs with the value of 1.42 × 10^-3 S/cm, which can be directly fabricated as electrode for supercapacitors. A maximum specific capacitance of 236.2 F/g can be achieved at a current density of 1 A/g of Co-MOF. Additionally, the electric performance and morphology of this Co-MOF can be modified by cetyltrimethylammonium bromide (CTAB) and the maximum specific capacitance could increase up to 334 F/g at 1 A/g when the ratio of ligand and CTAB is 1:6 (Co-MOF-6). Furthermore, the specific capacitance can retain at 64.04% and 77.92% of the initial value after 3000 cycles of Co-MOF and Co-CTAB-6, respectively. Obviously, the addition of CTAB further improves both capacitance and cycle stability.     

Straightforward Conversion of Alcohols into Nitriles

The reaction of various alcohols with cyanogen bromide, triphenylphosphine, and a base afforded the corresponding nitrile in satisfactory yields.     

Production and Application of the Langmuir Aggregates of Eosine with Cetyl Trimethyl Ammonium Bromide

The procedure of microphase adsorption–spectral correction is applied to the interaction of eosine Y (EO) to the micelles of cetyl trimethyl ammonium bromide (CTAB). The Langmuir aggregation of EO on CTAB occurs owing to microelectrostatic attraction. The results have shown that at pH 3.8, monomeric and micellar aggregates have the structure EO₅·CTAB₂ and (EO₅·CTAB₂)₃₉. The adsorption constant of an aggregate is 7.01·10⁵, its molar absorption coefficient is = 8.8·10⁴ liters·mole^–1·cm^–1 at 550 nm. Application of the aggregation of EO on CTAB gives satisfactory results for quantitative determination of cation surfaceactive agents (surfactants).     

Generation and stability of N-phenacyl-4-R-pyridinium ylides in silicon polypodands

Rate constants for the deprotonation reaction of N-phenacyl-4-R-pyridinium bromides (R=H, CH₃, CN) with 1,4-diazabicyclo[2.2.2]octane were measured in three silicon polypodands, Me₂Si24, EtSi34 and PhSi34. Silicon polypodands as open molecular capsules lower the deprotonation rates but increase the stability of the formed ylides in comparison to DMSO and water.     

Interaction of Alkali Blue 6B with Cetyltrimethylammonium Bromide

The microsurface adsorption–spectral correction (MSASC) technique has been applied to investigate the interaction of alkali blue 6B (AB6B) with cetyltrimethylammonium bromide (CTAB). The aggregation of AB6B on CTAB obeys the Langmuir isothermal adsorption. The aggregate was characterized by MSASC. For the monomer aggregate AB6B₂CTAB formed, its binding constant is calculated to be K = 3.01·10⁵ and its molar absorptivity to be 2.45·10⁶ liters·cm^–1 at = 690 nm. The adsorption has been used to carry out quantitative detection of cationic surfactant in samples.     

Photopromoted carbonylation of 1-bromo-6-chlorohexane under ambient conditions

Photopromoted carbonylation of 1-bromo-6-chlorohexane with CO catalyzed by CuBr2 and CdI2 has been carried out under ambient conditions. The results indicate that the carbonylation proceeds with the major product of chloroester ClCH2（CH2）5COOCH3 under catalysis of CuBr2. Furthermore, the activity of the carbonylation can be improved by addition of basic additives （NaOAc, Na3PO4 or （n-C4H9）3N）. Among these additives, （n-C4H9）3N is the most efficient in terms of the yield of ClCH2（CH2）5COOCH3. However, the methoxycarbonyl substituting chlorine product of BrCH2（CH2）5COOCH3 is not obtained in the presence of CdI2. This is quite different from the carbonylation of monochloroalkane.     

Solubility of copper (I) bromide in aqueous solutions of potassium bromide

The solubilities of cuprous bromide were measured at 24.8°C in aqueous KBr and in aqueous KBr-KNO₃ mixtures. The results have been analyzed to give equilibrium constanns from formation of neutral and negatively charged complexes of CuBr, and sets of virial parameters suitable for calculation of activity coefficients for the complexes.