Ionic Liquids with More than One Metal: Optical and Electrochemical Properties versus d-Block Metal Combinations

Thirteen N-butylpyridinium salts, including three monometallic [C₄Py]₂[MCl₄], nine bimetallic [C₄Py]₂[M_1−x^aM_x^bCl₄] and one trimetallic compound [C₄Py]₂[M_1−y-z^aM_y^bM_z^cCl₄] (M=Co, Cu, Mn; x=0.25, 0.50 or 0.75 and y=z=0.33), were synthesized and their structure and thermal and electrochemical properties were studied. All compounds are ionic liquids (ILs) with melting points between 69 and 93 °C. X-ray diffraction proves that all ILs are isostructural. The conductivity at room temperature is between 10⁻⁴ and 10⁻⁸ S cm⁻¹. Some Cu-based ILs reach conductivities of 10⁻² S cm⁻¹, which is, however, probably due to IL dec. This correlates with the optical bandgap measurements indicating the formation of large bandgap semiconductors. At elevated temperatures approaching the melting points, the conductivities reach up to 1.47×10⁻¹ S cm⁻¹ at 70 °C. The electrochemical stability windows of the ILs are between 2.5 and 3.0 V.     

Ionic Association of the Ionic Liquids [C4mim][BF4], [C4mim][PF6], and [Cnmim]Br in Molecular Solvents

Considering the ionic nature of ionic liquids (ILs), ionic association is expected to be essential in solutions of ILs and to have an important influence on their applications. Although numerous studies have been reported for the ionic association behavior of ILs in solution, quantitative results are quite scarce. Herein, the conductivities of the ILs [C_nmim]Br (n=4, 6, 8, 10, 12), [C₄mim][BF₄], and [C₄mim][PF₆] in various molecular solvents (water, methanol, 1‐propanol, 1‐pentanol, acetonitrile, and acetone) are determined at 298.15 K as a function of IL concentration. The conductance data are analyzed by the Lee–Wheaton conductivity equation in terms of the ionic association constant (K_A) and the limiting molar conductance (Λ_m⁰). Combined with the values for the Br^? anion reported in the literature, the limiting molar conductivities and the transference numbers of the cations and [BF₄]^? and [PF₆]^? anions are calculated in the molecular solvents. It is shown that the alkyl chain length of the cations and type of anion affect the ionic association constants and limiting molar conductivities of the ILs. For a given anion (Br^?), the Λ_m⁰ values decrease with increasing alkyl chain length of the cations in all the molecular solvents, whereas the K_A values of the ILs decrease in organic solvents but increase in water as the alkyl chain length of the cations increases. For the [C₄mim]⁺ cation, the limiting molar conductivities of the ILs decrease in the order Br^?>[BF₄]^?>[PF₆]^?, and their ionic association constants follow the order [BF₄]^?>[PF₆]^?>Br^? in water, acetone, and acetonitrile. Furthermore, and similar to the classical electrolytes, a linear relationship is observed between ln K_A of the ILs and the reciprocal of the dielectric constants of the molecular solvents. The ILs are solvated to a different extent by the molecular solvents, and ionic association is affected significantly by ionic solvation. This information is expected to be useful for the modulation of the IL conductance by the alkyl chain length of the cations, type of anion, and physical properties of the molecular solvents.     

Conductivity and Redox Potentials of Ionic Liquid Trihalogen Monoanions [X3]−, [XY2]−, and [BrF4]− (X=Cl,Br, I and Y=Cl,Br)

The ionic liquid (IL) trihalogen monoanions [N₂₂₂₁][X₃]⁻ and [N₂₂₂₁][XY₂]⁻ ([N₂₂₂₁]⁺=triethylmethylammonium, X=Cl, Br, I, Y=Cl, Br) were investigated electrochemically via temperature dependent conductance and cyclic voltammetry (CV) measurements. The polyhalogen monoanions were measured both as neat salts and as double salts in 1-butyl-1-methyl-pyrrolidinium trifluoromethane-sulfonate ([BMP][OTf], [X₃]⁻/[XY₂]⁻ 0.5 M). Lighter IL trihalogen monoanions displayed higher conductivities than their heavier homologues, with [Cl₃]⁻ being 1.1 and 3.7 times greater than [Br₃]⁻ and [I₃]⁻, respectively. The addition of [BMP][OTf] reduced the conductivity significantly. Within the group of polyhalogen monoanions, the oxidation potential develops in the series [Cl₃]⁻>[BrCl₂]⁻>[Br₃]⁻>[IBr₂]⁻>[ICl₂]⁻>[I₃]⁻. The redox potential of the interhalogen monoanions was found to be primarily determined by the central halogen, I in [ICl₂]⁻ and [IBr₂]⁻_, and Br in [BrCl₂]⁻. Additionally, tetrafluorobromate(III) ([N₂₂₂₁]⁺[BrF₄]⁻) was analyzed via CV in MeCN at 0 °C, yielding a single reversible redox process ([BrF₂]⁻/[BrF₄]⁻).     

Tetrahydrothiophene-Based Ionic Liquids: Synthesis and Thermodynamic Characterizations

S-alkyltetrahydrothiophenium, [C_nTHT]⁺ bis(trifluorosulfonyl)imide, [NTf₂]⁻ room temperature ionic liquids (ILs) and tetraphenylborate, [BPh₄]⁻ salts with alkyl chain lengths from C₄ to C₁₀ have been prepared. The ILs and salts were characterized and their purity verified by ¹H- and ¹³C-nuclear magnetic resonance, elemental analysis, ion chromatography, Karl-Fischer titration, single crystal X-ray diffraction as well as thermogravimetric analysis. The experimentally determined density and viscosity decrease with increasing temperature. The experimental solubility of the [C_nTHT][NTf₂]-ILs in water (75 to 2.2 mg/L for C₄ to C₁₀) was modelled with very good agreement by Perturbed Chain Statistical Associating Fluid Theory (PC-SAFT), based on the extremely low vapor pressures for the [C_nTHT][NTf₂]-ILs measured in this work (4.15 to 0.037 ⋅ 10⁻⁷×p_sat for C₄ to C₁₀). PC-SAFT is able to predict and correlate different thermodynamic properties by estimating the Helmholtz residual energy.     

Halide-Free Synthesis of New Difluoro(oxalato)borate [DFOB]−-Based Ionic Liquids and Organic Ionic Plastic Crystals

The implementation of next-generation batteries requires the development of safe, compatible electrolytes that are stable and do not cause safety problems. The difluoro(oxalato)borate ([DFOB]⁻) anion has been used as an electrolyte additive to aid with stability, but such an approach has most commonly been carried out using flammable solvent electrolytes. As an alternative approach, utilisation of the [DFOB]⁻ anion to make ionic liquids (ILs) or Organic Ionic Plastic Crystals (OIPCs) allows the advantageous properties of ILs or OIPCs, such as higher thermal stability and non-volatility, combined with the benefits of the [DFOB]⁻ anion. Here, we report the synthesis of new [DFOB]⁻-based ILs paired with triethylmethylphosphonium [P₁₂₂₂]⁺, and diethylisobutylmethylphosphonium [P_122i4]⁺. We also report the first OIPCs containing the [DFOB]⁻ anion, formed by combination with the 1-ethyl-1-methylpyrrolidinium [C₂mpyr]⁺ cation, and the triethylmethylammonium [N₁₂₂₂]⁺ cation. The traditional synthetic route using halide starting materials has been successfully replaced by a halide-free tosylate-based synthetic route that is advantageous for a purer, halide free product. The synthesised [DFOB]⁻-based salts exhibit good thermal stability, while the ILs display relatively high ionic conductivity. Thus, the new [DFOB]⁻-based electrolytes show promise for further investigation as battery electrolytes both in liquid and solid-state form.     

Cyanohydridoborate Anions: Synthesis,Salts, and Low-Viscosity Ionic Liquids

High-yield syntheses up to molar scales for salts of [BH(CN)₃]⁻ ( 2 ) and [BH₂(CN)₂]⁻ ( 3 ) starting from commercially available Na[BH₄] (Na 5 ), Na[BH₃(CN)] (Na 4 ), BCl₃, (CH₃)₃SiCN, and KCN were developed. Direct conversion of Na 5 into K 2 was accomplished with (CH₃)₃SiCN and (CH₃)₃SiCl as a catalyst in an autoclave. Alternatively, Na 5 is converted into Na[BH{OC(O)R}₃] (R=alkyl) that is more reactive towards (CH₃)₃SiCN and thus provides an easy access to salts of 2 . Some reaction intermediates were identified, for example, Na[BH(CN){OC(O)Et}₂] (Na 7 b ) and Na[BH(CN)₂{OC(O)Et}] (Na 8 b ). A third entry to 2 and 3 uses ether adducts of BHCl₂ or BH₂Cl such as the commercial 1,4-dioxane adducts that react with KCN and (CH₃)₃SiCN. Alkali metal salts of 2 and 3 are convenient starting materials for organic salts, especially for low viscosity ionic liquids (ILs). [EMIm] 3 has the lowest viscosity and highest conductivity with 10.2 mPa s and 32.6 mS cm⁻¹ at 20 °C known for non-protic ILs. The ILs are thermally, chemically, and electrochemically robust. These properties are crucial for applications in electrochemical devices, for example, dye-sensitized solar cells (Grätzel cells).     

Synthesis and Characterization of 5‐Cyanotetrazolide‐Based Ionic Liquids

New salts based on imidazolium, pyrrolidinium, phosphonium, guanidinium, and ammonium cations together with the 5‐cyanotetrazolide anion [C₂N₅]^? are reported. Depending on the nature of cation–anion interactions, characterized by XRD, the ionic liquids (ILs) have a low viscosity and are liquid at room temperature or have higher melting temperatures. Thermogravimetric analysis, cyclic voltammetry, viscosimetry, and impedance spectroscopy display a thermal stability up to 230 °C, an electrochemical window of 4.5 V, a viscosity of 25 mPa s at 20 °C, and an ionic conductivity of 5.4 mS cm^?1 at 20 °C for the IL 1‐butyl‐1‐methylpyrrolidinium 5‐cyanotetrazolide [BMPyr][C₂N₅]. On the basis of these results, the synthesized compounds are promising electrolytes for lithium‐ion batteries.     

Low Temperature Activation of Tellurium and Resource-Efficient Synthesis of AuTe2 and Ag2Te in Ionic Liquids

The low temperature syntheses of AuTe₂ and Ag₂Te starting from the elements were investigated in the ionic liquids (ILs) [BMIm]X and [P₆₆₆₁₄]Z ([BMIm]⁺=1-butyl-3-methylimidazolium; X = Cl, [HSO₄]⁻, [P₆₆₆₁₄]⁺ = trihexyltetradecylphosphonium; Z = Cl⁻, Br⁻, dicyanamide [DCA]⁻, bis(trifluoromethylsulfonyl)imide [NTf₂]⁻, decanoate [dec]⁻, acetate [OAc]⁻, bis(2,4,4-trimethylpentyl)phosphinate [BTMP]⁻). Powder X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy revealed that [P₆₆₆₁₄]Cl is the most promising candidate for the single phase synthesis of AuTe₂ at 200 °C. Ag₂Te was obtained using the same ILs by reducing the temperature in the flask to 60 °C. Even at room temperature, quantitative yield was achieved by using either 2 mol % of [P₆₆₆₁₄]Cl in dichloromethane or a planetary ball mill. Diffusion experiments, ³¹P and ¹²⁵Te-NMR, and mass spectroscopy revealed one of the reaction mechanisms at 60 °C. Catalytic amounts of alkylphosphanes in commercial [P₆₆₆₁₄]Cl activate tellurium and form soluble phosphane tellurides, which react on the metal surface to solid telluride and the initial phosphane. In addition, a convenient method for the purification of [P₆₆₆₁₄]Cl was developed.     

Lanthanoid‐Based Ionic Liquids Incorporating the Dicyanonitrosomethanide Anion

A series of low‐melting‐point salts with hexakisdicyanonitrosomethanidolanthanoidate anions has been synthesised and characterised: (C₂mim)₃[Ln(dcnm)₆] ( 1 Ln ; 1 Ln = 1 La , 1 Ce , 1 Pr , 1 Nd ), (C₂C₁mim)₃[Pr(dcnm)₆] ( 2 Pr ), (C₄C₁pyr)₃[Ce(dcnm)₆] ( 3 Ce ), (N₁₁₁₄)₃[Ln(dcnm)₆] ( 4 Ln ; 4 Ln = 4 La , 4 Ce , 4 Pr , 4 Nd , 4 Sm , 4 Gd ), and (N_1112OH)₃[Ce(dcnm)₆] ( 5 Ce ) (C₂mim=1‐ethyl‐3‐methylimidazolium, C₂C₁mim=1‐ethyl‐2,3‐dimethylimidazolium, C₄C₁py=N‐butyl‐4‐methylpyridinium, N₁₁₁₄=butyltrimethylammonium, N_1112OH=2‐(hydroxyethyl)trimethylammonium=choline). X‐ray crystallography was used to determine the structures of complexes 1 La , 2 Pr , and 5 Ce , all of which contain [Ln(dcnm)₆]^3? ions. Complexes 1 Ln and 2 Pr were all ionic liquids (ILs), with complex 3 Ce melting at 38.1 °C, the lowest melting point of any known complex containing the [Ln(dcnm)₆]^3? trianion. The ammonium‐based cations proved to be less suitable for forming ILs, with complexes 4 Sm and 4 Gd being the only salts with the N₁₁₁₄ cation to have melting points below 100 °C. The choline‐containing complex 5 Ce did not melt up to 160 °C, with the increase in melting point possibly being due to extensive hydrogen bonding, which could be inferred from the crystal structure of the complex.     

n-Butane,iso-Butane and 1-Butene Adsorption on Imidazolium-Based Ionic Liquids Studied with Molecular Beam Techniques

The interaction of molecules, especially hydrocarbons, at the gas/ionic liquid (IL) surface plays a crucial role in supported IL catalysis. The dynamics of this process is investigated by measuring the trapping probabilities of n-butane, iso-butane and 1-butene on a set of frozen 1-alkyl-3-methylimidazolium-based ILs [C_nC₁Im]X, where n=4, 8 and X⁻=Cl⁻, Br⁻, [PF₆]⁻ and [Tf₂N]⁻. The decrease of the initial trapping probability with increasing surface temperature is used to determine the desorption energy of the hydrocarbons at the IL surfaces. It increases with increasing alkyl chain length n and decreasing anion size for the ILs studied. We attribute these effects to different degrees of alkyl chain surface enrichment, while interactions between the adsorbate and the anion do not play a significant role. The adsorption energy also depends on the adsorbing molecule: It decreases in the order n-butane>1-butene>iso-butane, which can be explained by different dispersion interactions.     

Pseudohalogen Chemistry in Ionic Liquids with Non-innocent Cations and Anions

Within the second funding period of the SPP 1708 “Material Synthesis near Room Temperature”,which started in 2017, we were able to synthesize novel anionic species utilizing Ionic Liquids (ILs) both, as reaction media and reactant. ILs, bearing the decomposable and non-innocent methyl carbonate anion [CO₃Me]⁻, served as starting material and enabled facile access to pseudohalide salts by reaction with Me₃Si−X (X=CN, N₃, OCN, SCN). Starting with the synthesized Room temperature Ionic Liquid (RT-IL) [nBu₃MeN][B(OMe)₃(CN)], we were able to crystallize the double salt [nBu₃MeN]₂[B(OMe)₃(CN)](CN). Furthermore, we studied the reaction of [WCC]SCN and [WCC]CN (WCC=weakly coordinating cation) with their corresponding protic acids HX (X=SCN, CN), which resulted in formation of [H(NCS)₂]⁻ and the temperature labile solvate anions [CN(HCN)_n]⁻ (n=2, 3). In addition, the highly labile anionic HCN solvates were obtained from [PPN]X ([PPN]=μ-nitridobis(triphenylphosphonium), X=N₃, OCN, SCN and OCP) and HCN. Crystals of [PPN][X(HCN)₃] (X=N₃, OCN) and [PPN][SCN(HCN)₂] were obtained when the crystallization was carried out at low temperatures. Interestingly, reaction of [PPN]OCP with HCN was noticed, which led to the formation of [P(CN)₂]⁻, crystallizing as HCN disolvate [PPN][P(CN⋅HCN)₂]. Furthermore, we were able to isolate the novel cyanido(halido) silicate dianions of the type [SiCl_0.78(CN)_5.22]²⁻ and [SiF(CN)₅]²⁻ and the hexa-substituted [Si(CN)₆]²⁻ by temperature controlled halide/cyanide exchange reactions. By facile neutralization reactions with the non-innocent cation of [Et₃HN]₂[Si(CN)₆] with MOH (M=Li, K), Li₂[Si(CN)₆] ⋅ 2 H₂O and K₂[Si(CN)₆] were obtained, which form three dimensional coordination polymers. From salt metathesis processes of M₂[Si(CN)₆] with different imidazolium bromides, we were able to isolate new imidazolium salts and the ionic liquid [BMIm]₂[Si(CN)₆]. When reacting [Mes(nBu)Im]₂[Si(CN)₆] with an excess of the strong Lewis acid B(C₆F₅)₃, the voluminous adduct anion {Si[CN⋅B(C₆F₅)₃]₆}²⁻ was obtained.     

Effect of imidazolium-based ionic liquids on the aggregation behavior of twin-tailed cationic gemini surfactant in aqueous solution

Micellization behavior of the twin-tailed surfactants can be modulated by the addition of various modifiers. Ionic liquids (ILs) are one of them and are documented here. The beauty of these environmentally benign neoteric molecules lies in their structural versatility. Here, we have investigated the effect of three ILs: 1-butyl-3-methylimidazolium bromide ([C₄mim][Br]), 1-hexyl-3-methylimidazolium bromide ([C₆mim][Br]), and 1-octyl-3-methylimidazolium bromide ([C₈mim][Br]) on the aggregation and surface adsorption behavior of cationic gemini surfactant, bis(hexadecyldimethyl ammonium)propane dibromide (16-3-16) through experimentally measured electrical conductivities, surface tensions, and by spectral methods (UV-vis absorbance and fluorescence measurements). The main focus of the study is to observe the effect of added ILs on the critical micelle concentration (cmc), various surface parameters, aggregation number, and size of the aggregates of gemini surfactant. The results show that the more hydrophobic ILs, that is, [C₆mim][Br] and [C₈mim][Br] behave as electrolyte at lower concentration and cosurfactant at higher concentration, whereas moderately hydrophobic IL [C₄mim][Br] acts as an electrolyte at all concentration ranges studied. The modulating effects of ILs were also compared with conventional electrolyte (NaBr) at similar conditions.     

Ionic Liquid Based Polymer Gel Electrolytes for Use with Germanium Thin Film Anodes in Lithium Ion Batteries

Thermally stable, flexible polymer gel electrolytes with high ionic conductivity are prepared by mixing the ionic liquid 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (C₄mpyrTFSI), LiTFSI and poly(vinylidene difluoride-co-hexafluoropropylene (PVDF-HFP). FT-IR and Raman spectroscopy show that an amorphous film is obtained for high (60 %) C₄mpyrTFSI contents. Thermogravimetric analysis (TGA) confirms that the polymer gels are stable below ∼300 °C in both nitrogen and air environments. Ionic conductivity of 1.9×10⁻³ S cm⁻² at room temperature is achieved for the 60 % ionic liquid loaded gel. Germanium (Ge) anodes maintain a coulombic efficiency above 95 % after 90 cycles in potential cycling tests with the 60 % C₄mpyrTFSI polymer gel.     

Water‐Free Rare‐Earth‐Metal Ionic Liquids/Ionic Liquid Crystals Based on Hexanitratolanthanate(III) Anion

The hexanitratolanthanate anion (La(NO₃)₆^3?) is an interesting symmetric anion suitable to construct the component of water‐free rare‐earth‐metal ionic liquids. The syntheses and structural characterization of eleven lanthanum nitrate complexes, [C_nmim]₃[La(NO₃)₆] (n=1, 2, 4, 6, 8, 12, 14, 16, 18), including 1,3‐dimethylimidazolium hexanitratolanthanate ([C₁mim]₃[La(NO₃)₆], 1 ), 1‐ethyl‐3‐methylimidazolium hexanitratolanthanate ([C₂mim]₃[La(NO₃)₆], 2 ), 1‐butyl‐3‐methylimidazolium hexanitratolanthanate ([C₄mim]₃[La(NO₃)₆], 3 ), 1‐isobutyl‐3‐methylimidazolium hexanetratolanthanate ([isoC₄mim]₃[La(NO₃)₆], 4 ), 1‐methyl‐3‐(3′‐methylbutyl)imidazolium hexanitratolanthanate ([MC₄mim]₃[La(NO₃)₆], 5 ), 1‐hexyl‐3‐methylimidazolium hexanitratolanthanate ([C₆mim]₃[La(NO₃)₆], 6 ), 1‐methyl‐3‐octylimidazolium hexanitratolanthanate ([C₈mim]₃[La(NO₃)₆], 7 ), 1‐dodecyl‐3‐methylimidazolium hexanitratolanthanate ([C₁₂mim]₃[La(NO₃)₆], 8 ), 1‐methyl‐3‐tetradecylimidazolium hexanitratolanthanate ([C₁₄mim]₃[La‐(NO₃)₆], 9 ), 1‐hexadecyl‐3‐methylimid‐azolium hexanitratolanthanum ([C₁₆dmim]₃[La(NO₃)₆], 10 ), and 1‐methyl‐3‐octadecylimidazolium hexanitratolanthanate ([C₁₈mim]₃[La(NO₃)₆], 11 ) are reported. All new compounds were characterized by ¹H and ¹³C NMR, and IR spectroscopy as well as elemental analysis. The crystal structure of compound 1 was determined by using single‐crystal X‐ray diffraction, giving the following crystallographic information: monoclinic; P2₁/c; a=15.3170 (3), b=14.2340 (2), c=13.8954(2) Å; β=94.3453(15)°, V=3020.80(9) ų, Z=4, ρ=1.764 g cm^?3. The coordination polyhedron around the lanthanum ion is rationalized by six nitrate anions with twelve oxygen atoms. No hydrogen‐bonding network or water molecule was found in 1 . The thermodynamic stability of the new complexes was investigated by using thermogravimetric analysis (TGA). The water‐free hexanitratolanthanate ionic liquids are thermal and moisture stable. Four complexes, namely complexes 8 – 11 , were found to be ionic liquid crystals by differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). They all present smectic A liquid‐crystalline phase.     

Effects of Cationic Structure on Cellulose Dissolution in Ionic Liquids: A Molecular Dynamics Study

In recent years, great progress has been made in the dissolution of cellulose with ionic liquids (ILs). However, the mechanism of cellulose dissolution, especially the role the IL cation played in the dissolution process, has not been clearly understood. Herein, the mixtures of cellulose with a series of imidazolium‐based chloride ionic liquids and 1‐butyl‐3‐methyl pyridinium chloride ([C₄mpy]Cl) were simulated to study the effect that varying the heterocyclic structure and alkyl chain length of the IL cation has on the dissolution of cellulose. It was shown that the dissolution of cellulose in [C₄mpy]Cl is better than that in [C₄mim]Cl. For imidazolium‐based ILs, the shorter the alkyl chain is, the higher the solubility will be. In addition, an all‐atom force field for 1‐allyl‐3‐methyl imidazolium cation ([Amim]⁺) was developed, for the first time, to investigate the effect the electron‐withdrawing group within the alkyl chain of the IL cation has on the dissolution of cellulose. It was found that the interaction energy between [Amim]⁺ and cellulose was greater than that between [C₃mim]⁺ and cellulose, indicating that the presence of electron‐withdrawing group in alkyl chain of the cation enhanced the interaction between the cation and cellulose due to the increase of electronegativity of the cations. These findings are used to assess the cationic effect on the dissolution of cellulose in ILs. They are also expected to be important for rational design of novel ILs for efficient dissolution of cellulose.     

Extremely Low Vapor-Pressure Data as Access to PC-SAFT Parameter Estimation for Ionic Liquids and Modeling of Precursor Solubility in Ionic Liquids

Precursor solubility is a crucial factor in industrial applications, dominating the outcome of reactions and purification steps. The outcome and success of thermodynamic modelling of this industrially important property with equations of states, such as Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT), vastly depends on the quality of the pure-component parameters. The pure-component parameters for low-volatile compounds such as ionic liquids (ILs) have been commonly estimated using mixture properties, e. g. the osmotic pressure of aqueous solutions. This leads to parameters that depend on the solvent, and transferability to other mixtures often causes poor modeling results. Mixture-independent experimental properties would be a more suitable basis for the parameter estimation offering a way to universal parameter sets. Model parameters for ILs are available in the literature [10.1016/j.fluid.2012.05.029], but they were estimated using pure-IL density data. The present work focuses on a step towards a more universal estimation strategy that includes new experimental vapor-pressure data of the pure IL. ILs exhibit an almost negligible vapor pressure in magnitude of usually 10⁻⁵ Pa even at elevated temperatures. In this work, such vapor-pressure data of a series of 1-ethyl-3-methyl-imidazolium-based [C₂mim]-ILs with various IL-anions (e. g. tetrafluoroborate [BF₄]⁻, hexafluorophosphate [PF₆]⁻, bis(trifluoromethylsulfonyl)imide [NTf₂]⁻) were experimentally determined and subsequently used for PC-SAFT parameter estimation. The so-determined parameters were used to predict experimental molecular precursor solubility in ILs and infinitely diluted activity coefficients of various solvents in ILs. The parameters were further compared to modeling results using classical parametrization methods (use of liquid-density data only for the molecular PC-SAFT and the ion-based electrolyte PC-SAFT). As a result, the modeled precursor solubilities using the new approach are much more precise than using the classical parametrization methods, and required binary parameters were found to be much smaller (if needed). In sum, including the pure-component vapor-pressure data of ILs opens the door towards parameter estimation that is not biased by mixture data. This procedure might be suitable also for polymers and for all kind of ionic species but needs extension to ion-specific parametrization in the long term.     

Synthesis of Ti(OH)OF ⋅ 0.66 H2O in Imidazolium-based Ionic Liquids

The influence of the cation of imidazolium-derived ionic liquids (ILs) on a low-temperature solution-based synthesis of hexagonal tungsten bronze (HTB) type Ti(OH)OF ⋅ 0.66 H₂O and bronze-type TiO₂(B) is investigated. The IL (C_xmim BF₄) acts as solvent and also as reaction partner with respect to the decomposition of [BF₄]⁻, releasing F⁻. In the present study, the chain length of the alkyl chain side groups attached to the imidazolium ring was varied (C₂mim BF₄ to C₁₀mim BF₄), and the obtained solids were analyzed by Powder X-Ray diffraction (PXRD) followed by Rietveld refinement. As a main finding these analyses indicate a transformation of Ti(OH)OF ⋅ 0.66 H₂O into TiO₂(B), and upon prolonged reaction time finally also into anatase TiO₂. Rietveld analysis suggests that when using ILs with longer alkyl chains, the conversion of Ti(OH)OF ⋅ 0.66 H₂O is slower compared to syntheses performed with smaller alkyl chains. Hence, Ti(OH)OF ⋅ 0.66 H₂O appears to be metastable and is stabilized by long-chain ILs serving as surfactant attached to the crystallites’ surface. In this view, the ILs shield the nanoparticles and thus slow down the conversion into the more stable compounds. This confirms previous findings that ILs act as both, solvent and reaction medium in this reaction, thus enabling the synthesis of peculiar Ti-oxides.     

Highly Efficient Carbon Monoxide Capture by Carbanion-Functionalized Ionic Liquids through C-Site Interactions

A novel method for the highly efficient and reversible capture of CO in carbanion-functionalized ionic liquids (ILs) by a C-site interaction is reported. Because of its supernucleophilicity, the carbanion in ILs could absorb CO efficiently. As a result, a relatively high absorption capacity for CO (up to 0.046 mol mol⁻¹) was achieved under ambient conditions, compared with CO solubility in a commonly used IL [Bmim][Tf₂N] (2×10⁻³ mol mol⁻¹). The results of quantum mechanical calculations and spectroscopic investigation confirmed that the chemical interaction between the C-site in the carbanion and CO resulted in the superior CO absorption capacities. Furthermore, the subsequent conversion of captured CO into valuable chemicals with good reactivity was also realized through the alkoxycarbonylation reaction under mild conditions. Highly efficient CO absorption by carbanion-functionalized ILs provides a new way of separating and converting CO.     

The Acidity of the HBr/AlBr3 System: Stabilization of Crystalline Protonated Arenes and Their Acidity in Bromoaluminate Ionic Liquids

Bulk protonated mesitylene, toluene, and benzene bromoaluminate salts were stabilized and characterized in the superacidic system HBr/n AlBr₃ with NMR spectroscopy and X‐ray analysis of [HC₆H₃(CH₃)₃]⁺[AlBr₄]^? ( 1 ), [HC₆H₅(CH₃)]⁺[AlBr₄]^? ( 2 ), and [C₆H₇]⁺[Al₂Br₇]^??C₆H₆ ( 3 ). Protonation attempts in bromoaluminate ILs led to a complete protonation of mesitylene, and a protonation degree of up to 15 % for toluene in the IL BMP⁺[Al₂Br₇]^?. Benzene could only be protonated in the more acidic IL BMP⁺[Al₃Br₁₀]^?, with a degree of 25 %. Protonation attempts on aromatics provide evidence that the bromoaluminate ILs tolerate superacidic environments. On the basis of the absolute Brønsted acidity scale, quantum chemical calculations confirmed the superacidic properties, and rank the acidities in ILs down to a pH_abs value of 164 with an error of less than one pH unit compared with experimental findings. The neat AlBr₃/HBr system even may reach acidities down to pH_abs 163.