Quantitative surface analysis by Auger and x-ray photoelectron spectroscopy

Recent developments in quantitative surface analysis by Auger (AES) and x-ray photoelectron (XPS) spectroscopies are reviewed and problems relating to a more accurate quantitative interpretation of AES/XPS experimental data are discussed. Special attention is paid to consideration of elementary physical processes involved and influence of multiple scattering effects on signal line intensities. In particular, the major features of core-shell ionization by electron impact, Auger transitions and photoionization are considered qualitatively and rigorous approaches used to calculate the respective transition probabilities are analysed. It is shown that, in amorphous and polycrystalline targets, incoherent scattering of primary and signal Auger and photoelectrons can be described by solving analytically a kinetic equation with appropriate boundary conditions. The analytical results for the angular and energy distribution, the mean escape depth, and the escape probability as a function of depth of origin of signal electrons as well as that for the backscattering factor in AES are in good agreement with the corresponding Mote Carlo simulation data. Methods for inelastic background subtraction, surface composition determination and depth-profile reconstructions by angle-resolved AES/XPS are discussed. Examples of novel techniques based on x-ray induced photoemission are considered.     

气相分子吸收光谱法测定地下水中亚硝酸盐氮、氨氮、硝酸盐氮

采用气相分子吸收光谱法测定地下水中的亚硝酸盐氮(NO2^-)、氨氮(NH4^+)、硝酸盐氮(NO3^-)。考察NO2^-,NH4^+和NO3^-测定时的相互干扰,并给出了相应的消除方法。研究结果表明,测定NO2^-时,NH4^+和NO3^-无干扰;NO2^-对测定NH4^+和NO3^-产生干扰,可分别采用分段法和加入2滴10%氨基磺酸溶液的方法消除干扰;对于不含NO2^-或NO2-含量不高的地下水样品,可简化操作步骤直接测定NO3^-。该方法测定结果的相对标准偏差为0.73%~2.74%(n=12),样品加标回收率为97.67%~100.28%。所用检测仪器具有流动注射、自动进样及在线绘制标准曲线的功能,简化了标准方法中的样品前处理过程,减少了样品的损失,实现了自动化分析,大幅提高了检测结果的准确度和工作效率。     

A comparative quantum-chemical analysis of electronic structures and spectroscopic parameters of cycloalkanes and cyclopolysilanes

A comparative quantum-chemical analysis of the electronic structures and spectroscopic parameters of the cycloalkanes C₃H₆, C₄H₈, C₅H₁₀, and C₆H₁₂ and their silicon analogs Si₃H₆, Si₄H₈, Si₅H₁₀ and Si₆H₁₂ was performed in the framework of the SCF MO LCAO method in the INDO approximation. Qualitative interpretation of “abnormal” ionization potentials and energies of electronic absorption spectra of cyclopolysilanes has been given. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1105–1108, June, 1997.     

Metal foams: A survey

The current state-of-the-art in the development of cellular metal foams is reviewed, with focus on their fabrication, mechanical/thermal/acoustic properties, and potential applications as lightweight panels, energy absorbers, heat exchangers, and acoustic liners. Foam property charts with scaling relations are presented, allowing scoping and selection through the use of material indices.     

模糊正交法用于石墨炉探针原子化测定铋条件的研究

模糊正交法是通过把正交试验结果模糊化,然后用模糊数学的理论和方法来处理实验数据。与常规正交设计相比,能在同样实验工作量的情况下获得更多的信息。本文采用模糊正交法对元素Bi的测定条件进行优化,并将其同常规正交设计方差分析的结果进行了比较,并提出一个综合评价参数,对建立的分析方法进行了综合评价。     

Hydride generation atomic absorption spectrometry with insitu graphite tube trapping for the determination of Se (IV) and Se (VI) in baltic sea water samples

This paper reports the results of an optimisation study for a procedure to determine the total selenium and its inorganic species, Se(IV) and Se(VI) using atomic absorption spectrometry combined with hydride generation and in-situ trapping of the analyte on the inner walls of the graphite tube. With the use of the proposed modification, a detection limit (3σ) of 0.018 ng/ml is achieved. This paper presents exemplary results, according to the proposed procedure, for selenium determination in samples of marine water. The concentrations of selenium in the samples ranged from <0.02 ng/ml to 0.16ng/ml of Se(IV) and from <0.02 ng/ml to 0.10 ng/ml of Se(VI).     

原子吸收分光光度法测定钢铁中的铬

在稀硝酸介质中,不需分离其它干扰杂质,用原子吸收分光光度法直接测定中、低合金钢中的铬。该法测定铬的特征浓度(灵敏度)为0.08μg/mL,铬含量在0~6μg/mL内与吸光度线性相关,检出限为0.003μg/mL。该法测定速度快,与标准法测定结果的相对误差在±4.6%以内,回收率为97%~115%。     

流动注射在线阴离子树脂预富集火焰原子吸收测定痕量铜

研究了以阴离子交换树脂作吸附剂的流动注射在线微柱预富集火焰原子吸收测定铜的新方法。在最佳条件下富集１５０ｓ，富集２３倍，检出限０．２μｇ／Ｌ，ＲＳＤ为１．６％，分析速度２０次／ｈ。天然水样中可能存在的离子不干扰铜的测定。所建立的方法已用于水样中痕量铜的测定。     

Trace elemental determination in alcohol automotive fuel by electrothermal atomic absorption spectrometry

Suitable analytical methodologies were developed allowing direct determination of As, Cu, Fe, Pb, Sb and Sn in alcohol fuel samples by electrothermal atomic absorption spectrometry. Different chemical modification approaches were tested and compared in terms of analytical performance and in practical terms. Experimental conditions were optimized allowing little sample dilution and use of calibration curves prepared with aqueous inorganic analyte standards. Methodologies were tested with analyte spiked alcohol samples. Good analyte recoveries from spiked alcohol samples, precision better than 10% and limits of detection in the sub μg l⁻¹ range were achieved.     

Determination of total mercury in environmental and biological samples by flow injection cold vapour atomic absorption spectrometry

A simple and accurate method has been developed for the determination of total mercury in environmental and biological samples. The method utilises an off-line microwave digestion stage followed by analysis using a flow injection system with detection by cold vapour atomic absorption spectrometry.

The method has been validated using two certified reference materials (DORM-1 dogfish and MESS-2 estuarine sediment) and the results agreed well with the certified values. A detection limit of 0.2 ng g⁻¹ Hg was obtained and no significant interference was observed. The method was finally applied to the determination of mercury in river sediments and canned tuna fish, and gave results in the range 0.1–3.0 mg kg⁻¹.